1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Rocket D3-P
1 x Rocket D9-7
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Support conector MPX (6 pcs)
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Sparkplug Saito 400
1 x DG-303 ACRO 3750 mm, canopy
1 x Fox MDM 1 6000 mm
1 x Spark plug key NGK MVVS
1 x Sparkplug 1/4-32
1 x Sparkplug DLE CM6
1 x Bujia OS G5 gasolina
1 x "Taxi Tank" Fuel Tank
1 x Cable Cargador FUTABA
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Pitts Muffler kit for CAP 21
1 x 1000 ccm complete gasoline fuel tank
1 x ABS Strip 1.5x4.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Cabel "Y" 15 cm
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x 2,0x50 mm allen screwdriver
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x TopFuel LiPo 25C-ECO-X 350mAh 2S
1 x 1/12 Pilot "Fighter"
1 x ABS Strip 1.0x2.0x1000 mm
1 x Extra hard 250 ccm complete gasoline fuel tank
1 x 20x1000 mm Ring Strap Back To Back
1 x Extension lead 15 cm Multiplex
1 x Digital scale up to 40 kg
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Aluminium wide washer M3 gold (4 pcs)
1 x TopFuel LiPo 35C-ECO-X 2400mAh 3S MTAG
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Green silicone 0,25 qmm wire (50 m)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Round Rod 2,0x1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Extension 15 cm (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Extension 100 cm (Futaba)
1 x 41x5,5 mm wires output (2 pcs)
1 x 18 mm reinforced hinge
1 x Connector Sub-D 2+5 Male
1 x 30 cm BEC cable (male)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Aluminium sheet 500x250x0,5mm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x VBar NEO VLink 6.x Express, neon-yellow
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x 6 mm M3 variable horn
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Connector Sub-D 2+5 Female
1 x Flap hinge (6 pcs)
1 x CC 01
1 x Brass control horn M3 short for wire (2 pcs)
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Compact on-board starting system (9713)
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x Recess mount-rem. glow plug set
1 x Elevator VENTUS 2cx 4.5m
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x DOMINO 46-55 Trainer 1583 mm
1 x BULLIT Wing 1095 mm
1 x Electromotor starter EME 35cc
1 x Compact on-board starting system (9724)
1 x Allen wheel collar M3x5
1 x U Profile ABS 3,0x6,0x1000 mm
1 x CC 03
1 x 30 cm BEC cable (female)
1 x Blind nut M6 (4 pcs)
1 x 1000 cc gasoline fuel tank complet
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 1/6 Pilot "Buddy"
1 x CC 05
1 x 120x60 mm SLH KOVO wheel
1 x USB interface ALTIS
1 x Helice FOXY 22x10 2-Bl
1 x Propeller APC 10x4 Glow/Gas
1 x Propeller MASTER 7x4
1 x 12x8 tree blades propeller
1 x Propeller POWER-PROP 11x8
1 x Propeller MASTER 6x3
1 x Helice APC 14x4 W
1 x 8x6 tree blades propeller
1 x Propeller APC 11x5 Glow/Gas
1 x Allen wheel collar M4x6
1 x 
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Propeller MASTER AIRSCREW 12x8
1 x Propeller POWER-PROP 16x8
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Landing gear retract neumatic (Jet Legend)
1 x Round Rod 1,25x1000 mm
1 x GLOW 5C + accesories
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x 16mm Gear-Spotlight, 4W
1 x Round Rod 5,0x1000 mm
1 x Pushrod octagone 3/2 with coupler M2
1 x Strip ABS 2.0x3.0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x 
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Round Rod 1,0x1000 mm
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Hexagonal Nut M1 (10 pcs)
1 x PSC 5
1 x Threaded insert M3 (4 pcs)
1 x Extension 2/3 lipos JST - JST/C
1 x 1/12 Pilot "Tom"
1 x 1/7 Pilot "Japanese"
1 x Threaded insert M6 (10 pcs)
2 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
2 x Small flex hinge (12 uds)
2 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x Short extra-strong control horn with bearing 2,8x15
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x 
1 x Blind nut M4 (10 pcs)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CC 02
1 x Blind nut M5 (10 pcs)
1 x Hexagonal Nut M4 (20 pcs)
1 x 110x55 mm SLH KOVO wheel
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x 1/6 Pilot "John"
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x 1/6 Pilot "Garry"
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Extension 2/3 lipos JST/C
1 x 120x60 mm C SLH KOVO wheel
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Horns indoor
1 x Small aluminium horn gold (2pcs)
1 x Micro control horn (2 pcs)
1 x Small control horn with bearing (2 pcs)
1 x Universal batery Tester
1 x Round flex hinge (12 uds)
7,486.09EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies