1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SSPS105 Super Hi-Power servo
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo inverter
1 x JETImodel Addcap 820
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x XTorque CFK Servohebel 38
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Servo HITEC HS-5485 HB Digi
1 x 89 mm double servo arm with bearing (2 pcs)
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x GPS Logger Dymond
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Threaded coupler M2 (10 uds)
2 x Ventus 1:4 set of instruments
1 x 3.2 mm Prop Adapter M8
1 x Propeller APC 13x8 Electric
1 x Propeller APC 12x8 Electric
1 x Propeller APC 11x5.5 Electric
1 x 12x6 tree blades propeller
1 x 300x4 mm M4 shaft ship
1 x 3 mm Prop Adapter M6
1 x DPSI magnetic switch actuator (PCB)
1 x Extractor piñones 2.3/3.2 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x 28 mm turnbuckle
1 x 250 mm / 16 mm Airbrakes
1 x 14 mm portholes (10 pcs)
1 x Propeller APC 12x10 Electric
1 x Propeller APC 10x6 Electric
1 x 15x7 tree blades propeller LEFT
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 12x6 Electric
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Propeller APC 12x3.8 SF
1 x 3,2 mm Prop Adapter M8
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 13x4 Electric
1 x 31,0 mm propeller (rigth propeller)
1 x 10 mm portholes (10 pcs)
1 x 1000 ml sealer (DOPE)
1 x Propeller APC 10x5 Electric
1 x 12x8 tree blades propeller
1 x 2.3 mm Adapter for 30 mm spinners
1 x Vest clothes Hispano Aviación
1 x Adapter lead MPX/EC3
1 x PowerBox Smokepump JETs 2x outside
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Head spacer
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 12V Car Adapter
1 x 5 line servos wire black (1 m)
1 x Smoke Oil Blue 5 l
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x 30 cm MULTIPLEX female connector
1 x Dean "T" - Futaba Adapter
1 x 100m servo "Premium" wire (white/red/blue)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Conector JR Servo male (10 pcs)
1 x BlueCom™ Adapter (iOS)
1 x Head lower part
1 x Raer wall
1 x Blade holder upper
1 x EASYGLIDER 4 RR
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x MPX screwable clips (5 pcs)
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Parachutist
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Extension lead 15 cm Multiplex
1 x Adaptador equilibrador HITEC (XH)
1 x HITEC Power Supply 30A. Max. 540w
1 x Servo HITEC HS-225 BB
1 x Servo case HS-225MG/225BB/5245MG
1 x Gear set HITEC HS-65 HB
1 x Servo HITEC D145 SW
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Gear set HITEC HS-81
1 x LA500 tail empennage
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x Motor Set CHALLENGER Indoor
1 x GPS V2 Sensor for M-LINK receivers
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Rocket D3-P
1 x Powerset FunJet 2 with Vectorcontrol unit
1 x LENTUS Multiplex Fundas alas
1 x Interruptor On/Off Corto micro
1 x LENTUS RR 3.000mm MULTIPLEX
1 x Me-163
1 x Alu servo arm double RHINO
1 x Rocket D9-7
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Gear set HITEC HS-7950TH
1 x Servo HITEC D625 MW
1 x Receptor MINIMA 6S HITEC
1 x Gear set HITEC HS-56 HB
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x Servo Digital HITEC HS-5065 MG
1 x Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch
1 x Servo HITEC HS-125 MG
1 x Servo HITEC D85 MG
1 x Servo HITEC D131 MW nano
1 x Gear set HITEC HS-85
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Gear set HITEC HS-55
1 x Servo HITEC D950 TW
1 x Servo HITEC D954 TW
1 x Gear set HITEC HS-311/322/325BB
1 x Servo HITEC HS-5585MH
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Piñon motor rotor LA-500
1 x LA500 cyclic central part
1 x 4 blades set
1 x CAM-Carbon Light Prop 11x7"
1 x 4 mm Prop Adapter M8
1 x CAM-Carbon Light Prop 10x7"
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 45 mm white plastic spinner for folding propeller
1 x 33,0 mm propeller (left propeller)
1 x 42,0 mm propeller (rigth propeller)
1 x 4 mm Prop Adapter CN-Spinner
1 x KAVAN Hand crank fuel pump
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 8x6 Electric
1 x Propeller APC 7x4 SF
1 x Propeller APC 12x8 SF
1 x Propeller hub spacer 8/5.5
1 x 6 mm Prop Adapter M8
1 x 36 mm white plastic spinner for fixed propeller
1 x BALSA trip 3.0x5.0x1000 mm
1 x 42 mm black plastic spinner for fixed propeller
1 x Adaptadores carga 6s JST-XH
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Propeller POWER-PROP 7x7
1 x Propeller APC 9x6 Electric Pusher
1 x Propeller APC 11x4.7 SF
1 x Propeller APC 13x6.5 Electric
1 x Bird (Aero-naut)
1 x Cabestrante plastico 5x6 mm (10 pcs)
1 x Bandera Frankr 4x6
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 36,0 mm propeller (rigth propeller)
1 x Block 15x23 mm (5 pcs)
1 x 5 mm Prop Adapter M8
1 x Bocina 30 mm (1 pcs)
1 x 42 mm white plastic spinner for folding propeller
1 x Boat with oars 110 mm
1 x Boat 43 mm (5 pcs)
1 x 50 mm white plastic spinner for fixed propeller
1 x CAM-Carbon Light Prop 10x5" (Prop left)
1 x 36 mm black plastic spinner for fixed propeller
1 x CAM-Carbon Light Prop 10x6"
1 x 5 mm Prop Adapter M8
1 x CAM-Carbon Light Prop 10x5" (Prop right))
1 x 33,0 mm propeller (rigth propeller)
1 x Actuador lineal HLS12-100210-7.4v
1 x SKY RC T400Q Charger 4x100w
1 x Pin hinge 34x16 mm (10 uds)
1 x Ciano KAVAN Thin 20g
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x KAVAN CA Activator 150ml
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x XT60 Connector with Holder Male 2pcs
6,807.66EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies