Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Piloto LUCAS ARTF
2 x	Para-RC Trike "RC-Bullix"
3 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
2 x	Liston ABS 1,5x6,0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Cartucho de humo Rojo 140 g
3 x	Liston ABS H 2,0x2,0x330 mm
1 x	Paramotor Trike XL
3 x	GameCommander USB Universal
2 x	Mochila OPALE paramodels
2 x	Motorización Trike XL (motor+regulador+helice)
3 x	Interface Realflight Simulator
1 x	Cartucho de humo Azul 140 g
2 x	Liston ABS 1,5x8,0x1000 mm
1 x	Set de Humo "S"
2 x	Ballast 700gr OPALE
3 x	Paracaidas rescate "RC-Evo-Cross"
2 x	Liston ABS 1,5x3,0x1000 mm
2 x	Manga viento Ozone S - 700 mm
2 x	SIMtransmitter 6 Modo 2
1 x	Soporte ventral para AX-18/AX-60
1 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	Cartucho de humo Amarillo 140 g
1 x	Varilla ABS 1,0x1000 mm
3 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Set de Humo "Planeador"
3 x	Liston ABS 2.0x5.0x1000 mm
1 x	Cartucho de humo Blanco 140 g
2 x	Piloto MAX ARTF
1 x	Cartucho de humo Blanco 65 g
1 x	Kit de montaje "S" para avión
2 x	Paracaídas P4
1 x	Cartuchos de humo AX-60 amarillo (5 pcs)
3 x	Varilla ABS 5,0x1000 mm
2 x	Liston ABS 2.0x3.0x1000 mm
2 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
3 x	Aramid 50 daN 50 m
1 x	Cartuchos de humo AX-60 negro (5 pcs)
2 x	Paracaídas de seguridad 1,8 m2
1 x	Varilla ABS 3,0x1000 mm
1 x	Cartucho de humo Verde 100 g
2 x	Paramotor BackPack XXS 2
4 x	Varilla ABS 1,5x1000 mm
3 x	Interface Jack Adapter IKARUS
2 x	Liston ABS 1,0x5,0x1000 mm
2 x	Vela OXY 5.0 m2
1 x	Cartucho de humo Azul 100 g
1 x	Cartucho de humo Blanco 100 g
2 x	Varilla ABS 2,0x1000 mm
1 x	Cartucho de humo Amarillo 100 g
1 x	Liston ABS 1,0x2,0x1000 mm
3 x	Liston ABS 1,5x2,0x1000 mm
1 x	Paracaidista
3 x	Liston ABS 1,0x4,0x1000 mm
1 x	Anemometro Xplorer4
1 x	Brazo servo 52 mm Hitec
1 x	Brazo servo 20 mm Futaba
1 x	Brazo Servo XTorque 38 mm DES
1 x	Base de soporte montaje servos Std. vertical
1 x	Adaptador para rotula/Quick Link M3x20 Ø 5 mm (4 pcs)
1 x	Brazo servo doble pull-pull HUB alumin.76/92 mm Futaba con rótul
1 x	Brazo Servo XTorque 38 mm HITEC 25T
1 x	Pasta para estaño 20 g
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Pasta universal color Blanco (RAL 9003) 1 Kg
2 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Disolvente Plasti Dip 1000 ml
2 x	Relleno balsa HobbyLite
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Spray pintura Elapor Rojo 400 ml
3 x	Inversor de servo
1 x	Pintura GHT Lexan negro 150 ml
1 x	Programador HITEC DPC-11
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Piloto JET 1:3,5
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Varilla carbono 14 mmx1000 mm
1 x	Conector BEC macho (10 pcs)
1 x	Conector CAN 15
1 x	Bancada Servo Dymond DS 1800 MG Digital (2 pcs)
1 x	Prolongador silicona 100 cm (Futaba)
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Servo MKS 6100 DS
4 x	Set cintas unión paracaídas 145 cm
3 x	Liston ABS I 20x10x1000 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Servo Robbe FS 525 BB MG HV
1 x	Cargas cohete B4-0 (6 pcs)
1 x	Cartucho de humo Verde 140 g
1 x	Kit de montaje "S" para barco
2 x	Iniciadores para AX-60 (5 pcs)
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Cartuchos de humo AX-60 rojo (5 pcs)
2 x	Paracaídas PV6 para F3J
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Cartucho de humo Verde 65 g
1 x	Cera desmoldeante 650 g
1 x	Pasta universal color Jet Black 250 g
2 x	Rueda de cola para clase 60/120
1 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Pasta universal color Jet Black 50 g
1 x	Tapaporos 1000 ml (DOPE)
2 x	Para-RC Mix
1 x	Motor A30-14 L V4
1 x	Motor A60-6XS V4 28-pole kv370
1 x	Motor A50-12 L Glider
1 x	BULL MØ1 2.600mm YELLOW
1 x	Motor A40-10S V2 8 Pole PG: 6,7:1
1 x	Backmountset complete A40
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	L-39 Albatros 138"/3.5m lenght ARF
1 x	Eje para motor Hacker A20-S (3 uds)
1 x	BULL MØ1 2.600mm ORANGE
1 x	BULL MØ1 2.600mm "AeroPANDA"
1 x	EasyFLY Addon
1 x	Manga viento Ozone L -1200 mm
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
2 x	Paramotor BackPack XXS (sin accesorios)
1 x	Motor A200-6
1 x	Motor A20-22 L EVO
1 x	Motor A40-10S V4 14-Polos
1 x	Motor A10-7 L 4,4:1
1 x	BULL MØ1 2.600mm "RED BULL"
1 x	Motor A30-12 XL Glider
1 x	Motor A40-10 L V2 14-Polos Glider
1 x	Motor A50-16 S V4
1 x	Motor A200-8
1 x	Motor A50-14 L 8-Polos Turbina eléctica
1 x	Eje para motor Hacker A60 L V4
1 x	Motor A30-10 XL V4
1 x	Motor A20-26 M EVO
1 x	Recambio lonas Hovercraft
1 x	Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Kit motor ikarus indoor motor escobillas
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador 3,0 mm M6 para cono 30 mm hélice pleg.
1 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Rueda de cola para clase 20/60
1 x	Rueda de cola para modelos de 8 a 12 kg
1 x	Tester para servos
1 x	Cono carbono para F3A 85 mm para AXI
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Brazo servo redondo 30 mm Hitec
1 x	Brazo servo redondo 30 mm Futaba
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Adaptador de hélice 3,2 mm M5
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	Cono plástico blanco hélice fija 50 mm diámetro
1 x	Cono plástico rojo hélice fija 36 mm diámetro
1 x	Cono plástico negro hélice fija 36 mm diámetro
1 x	Plasti Dip Liquid Tape 429 ml naranja
1 x	Cono plástico negro hélice fija 50 mm diámetro
1 x	Disolvente barniz tensor 500 ml
1 x	Cono NUT M10x1
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 3,0 mm
1 x	Ahesivo en spray AEROFIX 2
1 x	Plasti Dip Liquid Tape 429 ml negro
1 x	Relleno balsa KAVAN 200ml - color balsa
1 x	Rueda de cola de 28 mm
1 x	Brazo servo 25 mm Futaba con rótula
1 x	Tren de cola (clase 60-120)
1 x	Rueda de cola para clase F3A
1 x	Rueda de cola para clase 40/90
1 x	Rueda de cola para modelos de 1 a 3 kg
1 x	Tren de cola carbono 50-70cc
1 x	Rueda de cola para modelos de 5 a 8 kg
1 x	Cono Aluminio hélice fija 45 mm diámetro / eje 6,0 mm
1 x	Conector JAPAN G2 Set 5 pares
1 x	Horn metálico ajustable rosca M3
1 x	Cono F3A 82 mm eje 12 mm perforado 3BL
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	PARAGON Trainer 46-55 1580 mm
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)

38,683.10EUR