Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Propeller APC 14x8.5 Electric Pusher
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Propeller POWER-PROP 14x9
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller POWER-PROP 13x9 Izda
1 x	BULL MØ1 2.600mm RED
1 x	Servo Controller Fibra optica
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Set stickers JEEMO "Andy"
1 x	Cooler motor type 150
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	BOEING 727 kit
1 x	ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	PC-21 XXL 3.395 mm
1 x	BD-5J ARF+
1 x	Electric Landing Gear FELIX SporJet 2.200mm
1 x	TMM 2512-3S heli
1 x	ULTIMATUM 2.0 m red/black
1 x	PC-21 2.880 mm BLUE French Army Scheme
1 x	FELIX SportJet Blue 2200 mm
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Motor mount VANQUIST 48" F3A
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	Ferrita 17x10x6.5 mm
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Oracover Black 2 m
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Extension 7.5 cm
1 x	Profile ABS half cane 3x1000 mm
1 x	Extension 15 cm (Futaba)
1 x	Professional Servo tester
1 x	Premium servo extension 75cm
1 x	17 mm servo arm with ball link DES Graupner
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	15 mm reinforced hinge
1 x	Futaba Female 40 cm extension
1 x	3l Smoke oil
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Extension 30 cm (Futaba)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Hitec 20 mm servo arm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Oracover Brown 2 m
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Horn with ball 40x30
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	"M" set
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Futaba 2x20 mm servo double arm
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Oracover Azul 2 m
1 x	Smoke set "M"
1 x	PCARD Wireless System
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Rotorshape Autogyro
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Electromagnets brake
1 x	RB-45 Electronic
1 x	Brake disc Electron Retracts
1 x	GS-200 Electronic
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	Manual Controller
1 x	ER-40eVo Set B [Complet Set + GS200]
1 x	Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x	ER40 Front Leg (with wheel 80mm)
1 x	Retract Landing gear ER40 Combo Xcalibur complete
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Parachute expulsion foam
1 x	Futaba 30 mm servo rounded arm
1 x	Large flex hinge (12 uds)
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Servo Dymond D 37 Eco
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Head spacer
1 x	6 mm aluminium horn with patella
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Green smoke canister 65 g
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Futaba 54 mm servo arm with ball link
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Futaba 38 mm servo arm with ball link
1 x	SlowFlyer control horn (3 pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Red smoke canister 140 g
1 x	Cabel "Y" 15 cm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Extension lead 15 cm Multiplex
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Blue smoke canister 100 g
1 x	Extension PVC 150 cm (Graupner)
1 x	Micro flex hinge (12 uds)
1 x	20 mm carbon horn
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Blades 330mm
1 x	18 mm reinforced hinge
1 x	Head core
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Blue smoke canister 140 g
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Yellow smoke canister 100 g
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	HITEC DPC-11 programmer
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x	Extension silicon 10 cm (Graupner)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Horn 5/10 with M2 Bearing
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Small aluminium horn blue (2pcs)
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	90x75 mm standart servo cover
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Fascination 3600 mm, Spare Wings (Top Model)
1 x	Interface Realflight Simulator
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	ASG 32 560 mm
1 x	Vasa model Catapult
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Universal Colour Paste deep black 250 g
1 x	Albatros red/white (Top Model)
1 x	IKURA GPS 4.28 m
1 x	SERVO HOLDER
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	SSPS105 Super Hi-Power servo
1 x	LOWER TOW HOOK
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Red aluminium servo arm V3-Futaba 1,5inch M3
1 x	X-RAY Micro QR (Tail Tube)
1 x	BABY glider (Aero-naut)
1 x	Chili F3K 2 wing servo mounted
1 x	120x60 mm SLH KOVO wheel
1 x	X-RAY Micro QR (Elevator)
1 x	Bags de Luxe ULTIMATUM 2.0
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Swing 1000
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)

43,552.18EUR