4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Conector BEC male (10 pcs)
Conector BEC male (10 pcs)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x VPP system propeller for AXI VPP motors (spare)
3 x Digital Air Speed Sensor And Pitot Tube Set
1 x PPM Encoder Module
1 x Tube Pitot to PIXHAWK
3 x Vasa model Catapult
1 x Bungee HLG Premium
1 x Medidor ángulos y/o incidencias
2 x Truck-trailer for gliders 720 x 239 mm
2 x Propeller balancer
1 x Field folding model stand SebArt
1 x Field folding model stand
1 x Truck-trailer for gliders 720 x 285 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Couple M4 for wire (10 pcs)
2 x Extension silicon 30 cm male (Futaba)
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 10 cm (Graupner)
2 x Premium servo extension 25cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension silicon 100 cm (Futaba)
2 x Cabel "Y" 30 cm (Futaba)
1 x Cable S.BUS 3 salidas 100 mm
3 x Round Rod 1,5x1000 mm
1 x Extension 100 cm (Futaba)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x Strip ABS 2.0x8.0x1000 mm
3 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.5x6.0x1000 mm
1 x Horn 16,5x20 mm (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Ball Link Plier
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Angle of incidence meter
1 x 5 mm Prop Adapter M6
2 x Motor OS 3820-1200 electric
1 x Quick hose connector 4-4 mm
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Tailwheel for 20/60 size
1 x Tailwheel for 1-3 kg models
1 x Strip ABS 2.0x5.0x1000 mm
2 x ABS I Strip 10x5x1000 mm
1 x Tail wheel for 8-12 kg models
2 x Strip 3,5x1,75x330 mm
1 x Tailwheel for F3A size
1 x 160 mm carbon undercarriage (2pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Extension silicon 30 cm male (Graupner)
1 x Check valve quick hose connector 4-4 mm
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Tail gear set (60-120 class)
1 x Round Rod 2,0x1000 mm
1 x Motor OS 3805-1200 electric
1 x 20 mm carbon horn
1 x 1/6 Pilot "Buddy"
1 x 1/6 Pilot "Garry"
1 x 200 mm extensión servo HITEC/JR
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x 110x55 mm C SLH KOVO wheel
1 x FOAM - CURE™ (24g)
1 x UHU hart 35 g
1 x Quick hose connector 3-3 mm
1 x Crystal TX 35.100 Ch 70
1 x ABS Strip 1.0x3.0x1000 mm
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x Round Rod 2,5x1000 mm
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Round Rod 6,0x1000 mm
1 x Landing gear strap medium (4 uds)
1 x Nylon threaded block M5 (2 uds)
1 x Crystal TX 35.010 Ch 61
1 x Futaba male 40 cm extension
1 x Extension silicon 100 cm (Graupner)
1 x Crystal Universal RX 35.090 Ch 69
1 x Nylon gear block Ø 5 mm (2 uds)
1 x Extension silicon 30 cm female (Graupner)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Aero shocks
1 x Round Rod 1,25x1000 mm
1 x Extension 7.5 cm
1 x Prolongador S-Bus JR/JR 20cm
1 x Fail Safe air retract
1 x Strip ABS 2.0x10.0x1000 mm
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Faucet FESTO
1 x Rocket D3-P
1 x Tow hook for tug
1 x DOMINO 46-55 Trainer 1583 mm
1 x BULLIT Wing 1095 mm
1 x 1/7 Pilot "Japanese"
1 x 10 mm gas motor standoff
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x PARAGON Trainer 46-55 1580 mm
1 x BULLIT Wing 840 mm
1 x PIX Hawk with accesories
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Propeller 11x4,7 SlowFlyer
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x 75 mm INO spinner (carbon imitation)
1 x RX cabel
1 x Captador RCEXL para DA
1 x Aluminum Fold Prop Spinner 50 mm / 6mm
1 x Piston ring for DA-60 and DA-120
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Piston ring for ZG 20 and G240RC
1 x Cylinder for ZG20
1 x Piston ring for DA-150
1 x Spring clamp for tube Ø50 mm
1 x Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B
1 x BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Turnbuckle M2x22/35 (2pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
2 x Round Rod 5,0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Round Rod 3,0x1000 mm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Propeller 10x4,7 SlowFlyer
1 x Propeller 9x7 SlowFlyer
1 x ABS I Strip 20x10x1000 mm
1 x Crystal Universal RX 35.140 Ch 74
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Crystal Universal RX 35.170 Ch 77
1 x Crystal Universal RX 35.040 Ch 64
1 x Crystal Universal RX 35.020 Ch 62
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Extension Arm for Carburetor (red)
1 x Sensor Ignition RCEXL Universal
1 x Extension Arm for Carburetor
1 x White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Carburator Moki S250
1 x Smoke pump RCEXL
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x 57 mm INO spinner (carbon imitation)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x RX external cable for estandar receivers
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x 82 mm INO spinner (carbon imitation)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Tailwheel for 60/120 size
4,780.73EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies