Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo HITEC D89 MW
62.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	3 LiPo XH>EH adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	5 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	4 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Connector CAN 15
1 x	CC 05
1 x	DPS Switch JR/JR
1 x	Circlick securite
1 x	CM-3
1 x	Double conector with JR adapter and 200 mm extension
1 x	BEC 3A FOXY
1 x	UBEC 6A KAVAN
1 x	Dean "T" - Futaba Adapter
2 x	CC 03
1 x	CC 01
1 x	30 cm BEC cable (female)
1 x	CC 02
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (male)
1 x	Connector Sub-D 2+5 Male
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	20x1000 mm Ring Strap Back To Back
3 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	SE Ring 200 mm (2 pcs)
3 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 300 mm (2 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
3 x
3 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Cinta Goldfix 1m
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	SE Ring 350 mm (2 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
2 x	800TVL CMOS camera for FPV
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 2,5x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Initior Transmitter FTX2 Wireless
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Canopy Latch
1 x	3,0x60 mm allen screwdriver
1 x	Opto Gas Engine Kill Switch
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Waterproof adhesive tape, width 19mm, length 25m
2 x	20x200 mm battery rings
1 x	Support pumb/filter Xicoy X45
1 x	Support Filtro FESTO
1 x	Support FUEL DOT V3
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Soporte grifo FESTO (2 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	Support conector MPX (6 pcs)
2 x	Support ECU Xicoy X-45
2 x	SE Ring HACKER 300 mm (2 pcs)
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Foil for sticking flaps and ailerons
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
2 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	ALU servo arm 3 mm shaft
1 x	Servo KST X08 Plus 9g HV servo
1 x	DINO Glider ARC
1 x	Fournier RF-4D
1 x	X-RAY Micro QR (Rudder)
1 x	E-FUN BUG (ROI-Import)
1 x	Glider PIROL
2 x	1/4 Pilot "Mike"
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	1/10 Pilot "Jimmy"
2 x	Pilot "Goose" (Slimline)
1 x	1/6 Pilot "Garry"
2 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Tony"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Piloto JET 1:3,5
2 x	Futaba Female 40 cm extension
1 x	Prolongador S-Bus JR/JR 10cm
2 x	Cable S.BUS 3 salidas 100 mm
3 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Premium servo extension 75cm
1 x	USB HLS prog. interface
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Mini DART 2 F3K carbon light 1m Green
1 x	Chili Race F3K (aramid nose)
2 x	X-RAY Micro QR (Elevator)
1 x	BABY glider (Aero-naut)
3 x	1/12 Pilot "Cougar"
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x	Cabel "Y" 15 cm
3 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Suncover 100cc Red
1 x	Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x	Covered closure or fairings
1 x	Spikes Band (5 m)
1 x	Tape GFK 25 mm
1 x	SLICK 360-B 104" (2640 mm)
1 x	Angle support XT60 conector
1 x	PT 16x10 E Propeller
1 x	Soporte filtro FESTO (4 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Cylinder for ZG20
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x	Cylinder ZG 26SC/SLH
1 x	LASER 260 60" V2 ARF Red (SkyWing)
1 x	Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x	Piston ring for DA-50R and DA-100
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Spring clamp for tube Ø50 mm
1 x	Gear for D 200 BX
2 x	Rocket D9-7
1 x	1/12 Pilot "Langley"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/6 Pilot "Buddy"
2 x	Piloto jet 130 mm
1 x	1/6 Pilot "John"
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension 30 cm (Futaba)
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Round Rod 3,0x1000 mm
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Piston ring for ZG 20 and G240RC
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 38 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	ULTRA STICK 10 cc ARF
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x	Ballast 700gr OPALE
1 x	Paramotor BackPack XXS 2
1 x	Rocket D3-P
2 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot "Dick" Legends Series (Slimline)
2 x	1/12 Pilot "Tom"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	1/12 Pilot "Fighter"
1 x	1/10 Pilot "Jack"
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/4 Pilot "Heidi"
1 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Circlick securite
1 x	Premium servo extension 50cm
1 x	Premium servo extension 100cm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	Servos security connector (2 pcs)
1 x	Moki Carburetor Throttle Arm with Extension
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Extension 15 cm (Futaba)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 50 cm (Graupner)
1 x	FOAM - CURE™ (24g)
2 x	Extension silicon 25 cm (Futaba)
1 x	Pick up DA50/100/150
1 x	Control horn long w/ball
1 x	Extension silicon 50 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension 7.5 cm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 75 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension 100 cm (Futaba)

11,580.26EUR