800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x SE Ring 240 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x 20x200 mm battery rings
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Tape GFK 50 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Tape GFK 25 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 330 mm (4 pcs)
2 x Screw-lock connector Ø 2 mm (2 uds)
3 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Locking cable tie 3.2x142 (uds)
2 x Cap closure 33/23.5mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Red smoke canister 100 g
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Electromotor starter EME 35cc
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x GLOW 5C + accesories
1 x Selfstarr EME35
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Starter EM Gear Power 80
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x DLE 30 complete electronic ignition
2 x DA 85 / DA 100 / DA 100 L carburetor
1 x Motor Saito FG-90 R3, 90 cc
1 x Sensor Ignition RCEXL Universal
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x Tape GFK 38 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x Tip wing protector 40x14 (2 pcs)
2 x SUS wire 3m (nylon coated)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Locking cable tie 4.6x203 (uds)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Locking cable tie 2.5x100 (uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Screw-lock connector M2 (2 uds)
1 x Wing bolts M3 Steel screw blue (2 pcs)
2 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Motor MOKI S 350 cc 7 cylinder
1 x UMS radial-engine, 7 cylinder 90ccm, gas
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Canister combo DLE 55 cc
1 x Carburetor DLE 20
1 x Pick up for motor Moki 250 cc 7 cylinders
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x Carburetor for ZG45SL and ZG62/S/SL
1 x CDI EME 55/60 cc
1 x Carburator gasket MOKI
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Motor DLE 120 cc
1 x Motor Moki S 400 cc 5 cylinders
1 x DLE Ignition 170M
1 x O-Ring SAITO FG-90 R3
1 x L ELBOW 90º ø 25 mm
1 x L ELBOW 90º ø 25 mm
1 x Giant Scale Muffler D.A. 170 (2 pcs)
1 x Canister combo DLE 120 cc
1 x Giant Scale Muffler D.A. 150 (2 pcs)
1 x Lipo SMART 5000 mAh 4s 14.8v IC5
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x 15 mm floating pad (30 pcs)
1 x Antenna Hole Cap V1 (Silver)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Suction funnel for carburetor 90D-L (red)
1 x RCEXL Electronic ignition twin CM-6
1 x Fuel line plug Small 2 pcs
1 x Ignition bed V2 Red color
1 x Compact on-board starting system (9713)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Aluminium ignition bad (red)
1 x 50 mm gas motor standoff
1 x 6 mm Quick clamp_S (10 pcs)
2 x Aluminium ignition bad (blue)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Lipo KAVAN 3300 mAh 7.4v 40/80C
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x SKY RC Temperature Sensor
1 x Extension Arm for Carburetor
1 x Extension Arm for Carburetor (red)
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Propadapter for motor A60-V2
1 x Allen wheel collar M3x3
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Buy Perforated film 100 cm / 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x 
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Stainless steel silencer for DA 85/170
1 x Reed valve carrier for DA-85, DA-100L and DA-120
1 x Fixing Ring with Base 40 mm
1 x Insulator ZG 20
1 x Flat version carb bend for the ZG 62
19,229.80EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies