186.00EUR

Bomba de humo JETs PowerBox 2 salidas
[POWER8015]


Bomba de humo JETs PowerBox 2 salidas
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x Turbina XICOY X95 compact
1 x Housing-upper del cíclico LA500
1 x Turbina X45 H "Light Version"
1 x Conector FESTO M7 Quick 6 mm
1 x Arandela de la rueda
1 x Palas de autogiro de 330 mm
1 x Tornillos flush mount M2
2 x Soporte cental de las palas del rotor
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Soporte superior de las palas del rotor
1 x Housing-lower del cíclico LA500
1 x Rodamiento 3x8x4
1 x Autogiro Cierva C30 Spain
1 x Soporte del rodamiento frontal LA500
1 x Elevador Rotorshape
1 x Bahía de la batería
1 x Espuma caja DC24 II
1 x Emisora MZ-10, 5 Ch HoTT
1 x Soporte/empuñadura emisoras JETI DC
1 x Cable profesor/alumno JETI
1 x Emisora MZ-18, 9 Ch HoTT
1 x Emisora GRAUPNER MZ-24 Pro
1 x Ciano INSTA - CURE™ Pocket (18g)
1 x Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x Fija tornillos IC-Loc™ Azul "medio" 10 ml
1 x Microbalones 100g (0.20g/cm3 - Aprox 1L)
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x Acelerador Aero EPH 161 (250 g)
1 x AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Conector JR Servo hembra (50 pcs)
1 x Extension 30cm SensorSwitch
1 x Emisora HORUS X10S Carbone Fiber
1 x Receiver FrSKY Archer R8pro 2,4 Ghz
1 x Emisora FUTABA T18 SZ + R7208SB
1 x Potenciometro micro
1 x Pupitre Jeti DS-14/16/24 Black
1 x Estuche bolsa JETI DS
1 x DSM 10 Dual Switch Mixer
1 x Caps multicolor Switch JETI
2 x Cianocrilato CA Gast 20g
1 x Ciano KAVAN Medium 20g
1 x Soporte trasero 50 mm para motor gasolina
1 x Arandela conica ancha alumino M3 oro (4 pcs)
1 x Cinta Roving carbono 20m
1 x Cianocrilato MD GA460 odourless 20g
1 x Soporte trasero 10 mm para motor gasolina
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Arandela conica alumino M3 azul (8 pcs)
1 x Agente espumante para resinas epoxycas 200g
1 x Microbalones (0,12 g) 350 ml
1 x Extension MPX-MPX 20 cm
1 x Conexion PREMIUM MAXI fuselaje/alas para 2 servos MPX 200cm
1 x Espuma caja emisora FUTABA longe case
1 x Stick para emisora FUTABA con interruptor de 3 posiciones
1 x GPS, Vario y Sensor de altitud SBS-01G
1 x Apoya manos Emisora PROFI TX
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
1 x Interruptor 2 posiciones "largo" JETI DS
1 x Pupitre Jeti DS-12 Black
1 x Interruptor 2 posiciones "largo" con spring JETI DC
1 x Interruptor SAFETY dos posiciones DS-16/14
1 x Almohadillas pupitre JETI
1 x Arandela negra para switches JETI frontal (2cps)
1 x Interruptor SAFETY dos posiciones DC-16/14
1 x EnLink 2RS Plus - DUO
1 x Tubo Tygon 6.35 x 3.18 mm 1 m
1 x Acelerador INSTA - SET™ (60g)
1 x Acelerador spray 200ml
1 x Cianocrilato MD GEL 454 tube 20g
1 x Ciano INSTA - CURE™ (225g)
1 x Acelerador INSTA - SET™ (235g)
1 x Ciano SUPER - GOLD™ (12g)
1 x Arandela conica alumino M4 verde (8 pcs)
1 x Soporte aluminio bateria rojo
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Fibra carbono molida 100g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Eje rueda 4x16 mm (2 uds)
1 x Soporte trasero 25 mm para motor gasolina
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x Resina Epoxy L + Hardener CL (60 min) kit/930g
1 x Resina Epoxy L-385 con catalizador H385 (3.5 kg total)
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Soporte para cables S 6 mm (10 pcs)
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x ARAMID panel nido de abeja 1300x2600x2 mm
1 x Arandela conica alumino M3 negro (8 pcs)
1 x Resina Epoxy L-385 (1250 g)
1 x Pegamento FOAM - CURE™ (24g)
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Acelerador Aero EPH 161 (500 g)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Brazo servo aluminio V2-JR 2,0" M3 dorado
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x Arandela conica alumino M4 azul (8 pcs)
1 x Resina P+acelerador (EPH161-P)kit 585g [500g res+85g ace]
1 x Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x Extension carga 50 cm para 2 Baterias
1 x Adaptador MPX-XT60 10cm
1 x Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Conector JR Servo macho (50 pcs)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Extension 60cm SensorSwitch
1 x Adaptador BlueCom™ (iOS)
1 x Cable servo 5 lineas negro (1m)
1 x Lancha Pilot
1 x External LED's (2 pcs)
1 x Extension 50cm Dispaly Royal/Champion SRS
1 x Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x Cargador 220/110v
1 x Bomba de humo JETs PowerBox 2 salidas
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Conexion PREMIUM MAXI fuselaje/alas para 3 servos SUB-D 200 cm
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Capuchón L interruptor aluminio azul
1 x Antena FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Capuchón M interruptor aluminio azul
1 x Correa emisora FUTABA
1 x Futaba Multi-Switch-Prop 12+2 DECODER
1 x Futaba T3PV T-FHSS
1 x Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado
1 x Prolong/Adap correa Futaba V
1 x Prolong/Adap correa SPK DX-8
1 x Bateria FUTABA 18MZ
1 x Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x Correa V2 doble
2 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x Futaba Prop Module F14
1 x FUTABA 6L + R3106 2.4GHz
1 x Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs.
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Cargador FUTABA SQN30W12P-08 220v
1 x Emisora TARANIS Q X7
1 x Prolong/Adap correa FF9-DX7-JR-Hitec
1 x Capuchón L interruptor aluminio rojo
1 x Soporte FPV Station para pupitre TX-Tray V1
12,921.52EUR
Fabricantes
Información del Fabricante
PowerBox Systems
PowerBox Systems Página Principal
Otros productos
Idiomas
Español English
Monedas