119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Black silicone 1,0 qmm wire (50 m)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Painting GHT Lexan Black 150 ml
1 x 
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x 100m servo "Premium" wire (white/red/blue)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Spray adhesive AEROFIX 2
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x Spannlack 1000 ml
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Black silicone 0,25 mm² wire (25 m)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x Oracover CARBON Metalic 1 m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Oracover Black 10 m
1 x Spray EC Red 400ml
1 x Protective Cover for wires Ø 20 mm 1000 mm
2 x Universal Colour Paste deep black 250 g
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 6 mm Quick clamp_S (10 pcs)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Glases Ace
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Solvent Plasti Dip 1000 ml
1 x 20 g tin paste
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Partall paste 650 g
1 x Cable set PREMIUM, fuselage/wing
1 x ORACOVER Ferrari red (2 m)
1 x Glases Stratus
1 x 5 line servos wire black (1 m)
1 x Glases Nimbus
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 5 mm M2 variable inclined horn
1 x 
1 x Pitts Mufflers EME 55/60 cc
1 x DPSI Ampere battery backer
1 x 30 mm gas motor standoff
1 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Marker ties (20 pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Tape GFK 50 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Brass control horn M3 short for wire (2 pcs)
1 x CC 02
1 x Propeller pad and output shaft EME 55/60 cc
1 x Foil for sticking flaps and ailerons
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Horn F3A de Titanium 16 mm (2 units)
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x DPSI magnetic switch actuator (housing)
1 x Horn 6/20 with M3 Bearing
1 x Dia. 20x15 mm teflon tube for escape
1 x Brass control horn M2 short for wire (2 pcs)
1 x Canister combo DLE 120 cc
1 x Piston ring EME 35cc
1 x Cinta Goldfix 1m
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Piñon motor autostarter 60cc
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 110 degree stainless steel bend D=18mm, widened to 20mm
1 x Adjustable brass horn threaded M3
1 x Carburetor menbrane for ZG 20/22/23/26/31 motor
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Motor EME 35 cc
1 x Cable with accesories
1 x CC 05
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carburator joints for SAITO FA80/80GK/72/72GK
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 10 mm gas motor standoff
1 x Round Rod 6,0x1000 mm
1 x Canister combo DLE 55 cc
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x 45 mm gas motor standoff
1 x Motor EME 70 cc
1 x Horn DUBRO 1/2A
1 x Round Rod 2,5x1000 mm
1 x 6 mm M3 variable horn
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ABS I Strip 20x10x1000 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Selfstarr EME35
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Carbon fiber rod 14 mmx1000 mm
1 x SE Ring 250 mm (2 pcs)
1 x Pitts Mufflers EME 70 cc (2 pcs)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x SE Ring 350 mm (2 pcs)
1 x Horn mando long (2 pcs)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 7 mm gas motor standoff
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Ring 320 mm length (5 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Strip ABS 2.0x5.0x1000 mm
2 x ABS Strip 1.5x2.0x1000 mm
1 x Motor NGH GT-9 V2
1 x COMFORT MOUNT ø 60mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Adapter lead MPX/EC3
1 x Canister combo DLE 120 cc
1 x Spray YELLOW Inca Lexan 150ml
1 x Nitroverdu 500 ml
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Tubo Teflon Ø25 mm x 10cm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Stainless Steel S-Bend D25x0,5mm
1 x 20 mm carbon horn
1 x Glases Nimbus "Black"
1 x Glases Innovation Plus
1 x Oracover Black 2 m
1 x Silicone red 1,5 qmm wire ( 1 m)
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x Oratex Antik 2m
1 x Silicone red 6,0 qmm wire ( 1 m)
1 x Silicone red 1,5 qmm wire ( 25 m)
1 x Glases Moritz
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Oratex Natural White 20m
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 1000 ml sealer (DOPE)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Hobbylite Filler, Balsa colour
1 x Paint gun for sprays
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x Ventus 1:4 set of instruments
1 x Release wax 250ml
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Motor EME 70 cc with autostarter
1 x Spring Clip 28 mm teflon tube
1 x 10 mm gas motor standoff
1 x Spring Clip 25 mm teflon tube
1 x Dia. 25x20 mm tefon tube for escape
6,266.09EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies