Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	quality beech plywood BIRCH 600x300x2.0 mm
2 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
2 x	BALSA trip 4.0x4.0x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
3 x	Pine wood slat 10x10x1000 mm
2 x	A/C quality beech plywood 600x300x5.0 mm
2 x	Beech dowels 3.0 x 1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
2 x	BALSA trip 5.0x5.0x1000 mm
3 x	Linden wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA triangular 10x10x1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
3 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Interface Jack Adapter IKARUS
1 x	SIMtransmitter 6 Mode 2
1 x	GameCommander USB Universal
1 x	Long pinned hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	ABS tube 18.0x16.0x1000 mm
2 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Copier 2x20 cm pcs
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Starter EM Gear Power 80
3 x	Screwdriver for Torx® TX6
2 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Ball Link Plier
1 x	Hexagonal ball head 2.0 x 50 mm
2 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Screwdriver for Hexagon 1,27mm
2 x	1,5x50 mm allen screwdriver
1 x	Z Bender - S Type Tool
2 x	ABS tube 3.0x2.0x330 mm
2 x	Screwdriver for Hexagon 1,5mm
2 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Hot Glue Stick GREEN
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
2 x	ABS tube 7.0x6.0x1000 mm
2 x	Dust collector for mould cleaning
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	Ball Link Plier
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	2,5x60 mm allen screwdriver
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	2,0x50 mm allen screwdriver
2 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Digital precision scale up to 2000 g
1 x	Z Bender - S Type Tool
2 x	Vacuum pump P1-N
2 x	Crimping tool
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
4 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x	Profile ABS Square 3 x 1000 mm
3 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	L-Connector 1.0 mm x 1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
3 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
2 x	U Profile ABS 2,0x4,0x1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Balsa panel 3.0x100x1000 mm
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
3 x	500 ml sealer (DOPE)
1 x	Paramotor BackPack XXS 2
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Piloto JET 1:3,5
1 x	ABS I Strip 10x5x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	ABS angle 1.5x1.5x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
2 x	Extractor piñones 2.3/3.2 mm
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Y Cable
2 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
3 x	Optical RPM Sensor
1 x	120x60 mm C SLH KOVO wheel
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
3 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	EDGE 540-A 105" (2660 mm)
2 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	SLICK 360-B 104" (2640 mm)
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Sealing Iron Sleeve STD
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Starter EM Gear Power 250
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	PROXXON - SAW BLADE HSS (50MM - 100T) (28020)
1 x	24x12 prop Super Silence
1 x	3-blades 24x12 carbon prop Super Silence
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Servo HITEC D625 MW
1 x	Servo HITEC D954 TW
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Gear set HITEC HS-7950TH
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Avanti XS Jet , Carrying bags (SebArt)
1 x	Avanti S 1.8m Jet FREECE TRICOLORI
1 x	Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x	Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Cut tube
1 x	Suncover 100cc Red
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Gates hinge aluminium (1 pcs)
1 x	PARTENAVIA 2020 mm ARC with Flaps
1 x	BU 131 Jugmann Panel Instrum. frontal
1 x	3-blades 16x10 carbon prop Super Silence
1 x	20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	1000 ccm complete gasoline fuel tank
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Hardener Aero EPH 161 (500 g)
1 x	Hardener Aero EPH 161 (250 g)
1 x	DUPLEX 2.4EX Central Box 320
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Digital scale up to 40 kg
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	Servo HITEC HS-5585MH
1 x	Receptor MINIMA 6S HITEC
1 x	Servo HITEC HS-225 MG
1 x	Servo HITEC D-955 TW Titanium
1 x	Gear set HITEC HS-311/322/325BB
1 x	Gear carbonite set HITEC HS-6965
1 x	Gear set HITEC HS-55
1 x	Servo Digital HITEC HS-5065 MG
1 x	Servo HITEC HS-225 BB
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Gear set HITEC HS-125MG/5125MG
1 x	Gear set HITEC D645 MW
1 x	HITEC DPC-11 programmer
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Avanti S Jet , Field folding model stand (SebArt)
1 x	BLANIK 50 V2 Silver/Blue (SebArt)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	DUPLEX 2.4EX Central Box 220
1 x	Vacuum pump 12 CFM
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Carbon plate 350x150x1.0 mm
1 x
1 x	Starter Sullivan-STAR 601
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	EDGE 540 1.73m SEAGULL Model
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
2 x	Profile ABS Square 1 x 1000 mm
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	T-Connector 4.0 mm x 1000 mm

20,913.49EUR