4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]


BULL MØ1 2.600mm \"RED BULL\"
BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors DEANS (T)
1 x Horn 6/20 with M3 Bearing
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Cable control set
1 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH male balance (5S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
4 x MPX Sub-D Adaptor
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x XH male balance (3S) connector (2 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 2 mm (M/F)
1 x Small aluminium horn blue (2pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Banna gold connector 2,5 mm (M/F)
1 x XH female balance (3S) connector (2 pcs)
1 x Conector BEC female (10 pcs)
1 x Connector CAN 15
1 x Connectors banna oro 4 mm (M/F)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
2 x Conector Servo female 4 pines
1 x Horn 20x28,5 mm (2 pcs)
1 x Gold antispark 4 mm plug
2 x Optotronix Aurora Plug
1 x Connectors banna oro 3 mm (M/F)
1 x Horn 5/10 with M2 Bearing
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Connectors banna gold 5,5 mm (M/F)
2 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Cable with accesories
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x 30 cm DEANS female connector
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Landing gear axle Ø 6 mm (2 uds)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Interface Realflight Simulator
1 x Interface Jack Adapter IKARUS
1 x PPM Encoder Module
2 x ABS I Strip 10x5x1000 mm
2 x Round Rod 1,5x1000 mm
2 x Round Rod 4,0x1000 mm
2 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.0x4.0x1000 mm
2 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
2 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Red smoke canister 100 g
1 x White smoke bombs AX-60 (5 pcs)
2 x Small aluminium horn gold (2pcs)
1 x Conector XT-30 (macho)
2 x LH long aluminium horn L31xH30 (2pcs)
1 x 6 mm red aluminium threaded horn with patella
2 x Fully Threaded Steel Rod M2,5 (2 uds)
2 x Horn mando small (2 pcs)
1 x 6 mm M3 variable horn
1 x 6 mm aluminium horn with patella
2 x 6 mm blue aluminium threaded horn with patella
2 x Ventus 1:4 set of instruments
1 x Connectors DEANS 4 pins (1 pair)
1 x Rudder forward 90x28 "type Kato"
1 x Small adjustable control horn with bearing
1 x Conector MR-60 (pareja)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Fascination 3600 mm (Top Model)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x 30 cm MULTIPLEX female connector
1 x Bag connector 2 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
2 x LH long black aluminium horn L31xH30 (2pcs)
1 x Connectors MPX male
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x XH female balance (4S) connector (2 pcs)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x EasyFLY Addon
1 x Horn for flap control (1 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Xplorer4 anemometro
1 x PIX Hawk with accesories
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Strip ABS 2.0x8.0x1000 mm
1 x Angled clevis with threaded rod M3
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x LED blink wire flashing (blue - 2pcs)
1 x LED lighting system High Power
1 x LED blink wire flashing (red - 2pcs)
1 x Wheel FEMA 140 mm / 6 mm
1 x Wheel FEMA 178 mm / 8 mm
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x X-RAY Micro QR
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DPSI Ampere & Voltage bundle
1 x Spinner plastic black fixed propeller 30 mm
1 x Brass control horn M2 large for wire (2pcs)
1 x Charger LiPo Charger4
1 x 45 mm white plastic spinner for fixed propeller
1 x Pipa 3D F-16 Scale 1/6
1 x Horn mando long (2 pcs)
1 x Long adjustable control horn 3x34
1 x Extra long horn 60x30
1 x Spinner plastic red fixed propeller 30 mm
1 x Brass control horn M3 short for wire (2 pcs)
1 x Soporte carbono MR30 (2 pcs)
1 x Small adjustable aluminium control horn with bearing 2,8x15
2 x XT60 Connector with Holder Male 2pcs
1 x XT-90 connector (pair)
1 x XH female balance (7S) connector (2 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x Soldering PCBs 8pin, 5 pieces
1 x MR30 connector female
1 x Protector Connector Dean-T (1 pair)
1 x XH male balance (8S) connector (2 pcs)
1 x XT-60 connector (male)
1 x Long horn 50x26
1 x DPSI Micro MPS
1 x Cover cap drop-shaped paintable 43 mm
1 x DPSI LR-S (with push buttons)
1 x Mini DART 2 F3K carbon light 1m Green
1 x X-RAY Micro QR (Rudder)
1 x Magnetic Connect locking system
1 x DPSI OCP Overload protection
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x DPSI Micro - RCS
1 x PWC4 wing/fuselage connector for 4 servos
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x X-RAY Micro QR (Elevator)
1 x DPSI 2001 RV
1 x DPS Switch JR/JR
1 x EWC6 40 cm wing connector
1 x Cable adapter iCharger
1 x DPSI RV Mini 5 Magic
1 x Filter Capacitor JR
1 x DPSI RV Mini 6 (2008)
1 x Heat sink for Optotronix LEDs
1 x OPTOTRONIX Aurora LCU
1 x DPSI Micro - RCS RV
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Chili F3K 2 wing servo mounted
1 x X-RAY Micro QR (Tail Tube)
1 x Chili Race F3K (aramid nose)
1 x EWC3 100 cm wing connector
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x X-RAY Micro QR (Fuselage with canopy)
1 x PowerFuel RX V2 Fuel Pump
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x DPSI RV Mini 6 Magic
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Short adjustable control horn 3x24
7,780.13EUR
Manufacturers
Manufacturer Info
Hispano Aviacion
Other products
Languages
Español English
Currencies