Top » Catalog » Hardware » Wing Joiner » R74141311-S

28.34EUR

Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
[R74141311-S]

Wing-connector with GRP + CRP tube

The Wing-connector system consists of one GRP wing joining tube (outside) and one CRP wing tube (inside), they are high quality made and accurately fitting. The GRP tube fits completely over the CRP tube, the wing-connector is therefore telescopic.

Carbon fiber semi-finished tube - light weight, high strength, excellent corrosion and heat resistance and electrical conductivity. High quality epoxy resin matrix

Dimensions:
- GRP tube (outside tube) outer-Ø (oder outside diameter) 13.7 mm, wall thickness 0.6 mm
- CRP tube (inside tube) outer-Ø (oder outside diameter) 12.5 mm, wall thickness 0.9 mm

- Tolerance: ca. ± 0.3 mm
- Weight: approx. 113 g

Application:
Wing-connector system for big model airplanes, e.g. it is used to plug the wings onto the fuselage.

This system can only be delivered complete, the individual tubes are not available.

under request

Reviews

Customers who bought this product also purchased

Cockpit plastic closing under request	Canopy Latch under request	28 mm tailwheel unit under request
Nylon hinge 15x0,3 (10 pcs) under request	Straightened rod Ø 4.0 mm x 1000 mm under request	Horn 16,5x20 mm (2 pcs) under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	USB Mini Camera endoscope
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	800TVL CMOS camera for FPV
2 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
3 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Covered closure or fairings
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Canopy Latch
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Screw-lock connector M2 (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	Steering arm 16 mm Ø 4 mm
1 x	Cockpit plastic closing
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	One touch canopy lock
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
2 x	Connectors banna oro 2 mm (M/F)
1 x	Fixed launching hook
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	Connector CAN 15
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	30 cm DEANS female connector
2 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	SERVO HOLDER
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	XH female balance (2S) connector (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	LOWER TOW HOOK
1 x	Towing hook <3m
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x	Connectors DEANS (T)
1 x	Tow hook for tug
1 x	Conector BEC female (10 pcs)
2 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x	Connectors banna gold 5,5 mm (M/F)
1 x	Gold antispark 4 mm plug
1 x	Oracover Black 2 m
2 x	Glases Ace
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	CC 03
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Landing gear frontal support 29x26x13,5
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Split pin 1x8 mm (10 uds)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	140 mm rods set for direction control
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Landing gear frontal support 25x32x16
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Cable tie mounts 4.3 (4 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	Electric spoiler 250 mm (2 pcs)
1 x	45 mm rods set for direction control
2 x	Snap short M2 (10 uds)
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Spinner propeller pleg. 42 mm/6,0 mm/0º
1 x	Spinner propeller pleg. 36 mm/6,0 mm/0º
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Towing hook
1 x	XH male balance (4S) connector (2 pcs)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH male balance (6S) connector (2 pcs)
1 x	Conector XT-30 (macho)
1 x	Conector JR Servo female (50 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Stickers-digit for marking
1 x	Suncover 100cc Red

2,956.52EUR