Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Set electric retractil ULTIMATUM 1.5 combo JP-Hobby
285.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Red silicone 1,0 qmm wire (50 m)
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Cable Cargador FUTABA
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Cable set PREMIUM, fuselage/wing
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	10 mm Quick clamp_L (6 pcs)
3 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
2 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Silicon black 2,5 qmm cable ( 25 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
2 x	Ferrita 27x14x7 mm
1 x	Long pinned hinge (12 uds)
1 x	25 mm reinforced hinge
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	15 mm reinforced hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Ferrita 14x8x5.5 mm
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Gates hinge
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	L-Connector 1.5 mm x 1000 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Softshell Hispano Aviación
1 x	Cap Hispano Aviación
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	Tape GFK 50 mm
3 x
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Shirt Hispano Aviación
1 x	SE Ring 300 mm (2 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 480 mm (2 pcs)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 38 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	20x1000 mm Ring Strap Back To Back
1 x	Vest clothes Hispano Aviación
1 x	Silicone black 1,0 qmm wire (100 m)
1 x	CC 03
1 x	Horn 13,5x16 mm (2 pcs)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Extra long horn 60x30
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	2 LiPo XH>EH adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	4 mm Prop Adapter M8
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	2,3 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M6
1 x	2 mm Prop Adapter M6
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Medium pin type hinge (12 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
2 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Split pin 1x8 mm (10 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	SE Ring 450 mm (2 pcs)
2 x	Air Intake manifold 90° - Large
1 x	Jeti Advance Pro Program Card
1 x	Hacker X-Pro USB interface V2
1 x	Multi-adapter balancer JST/C - TP
1 x	Snap for floding prop for 2 mm axi
1 x	Futaba male 40 cm extension
1 x	Extension silicon 75 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Protector Connector Dean-T (1 pair)
1 x	Tip wing protector 30x10 (2 pcs)
3 x	Starter EM Gear Power 80
2 x	Tarjeta programadora RAY G2
1 x	Jeti Advance Plus Program Card
1 x	Kontronik ProgUnit
1 x	DYMOND VTX UBS Programming adapter
1 x	ProgBOX MASTER Hacker
1 x	JetiBOX
1 x	Mini-handed clamp
1 x	Ferrita con funda
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Futaba Female 40 cm extension
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	4 mm Prop Adapter M8
1 x	PT 22x10 EL Propeller
1 x	PT 21x13 EL Propeller 3 Blade
1 x	PT 21x13 EL Propeller
1 x	2.3 mm Adapter for 30 mm spinners
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	5 mm Prop Adapter M8
1 x	Canopy Latch
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Allen wheel collar M3x3
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	11 mm Rubber pads (14 pcs)
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	PT 16x10 E Propeller
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Flap hinge (6 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Cylinder for ZG20
1 x	Spring Clip Ø25 mm
1 x	Maleta transporte FUTABA 10PX
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	140 mm rods + T patellas set for direction control
1 x	Allen wheel collar M3x5
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Foam air filter Ø 48 mm, blue
1 x	3 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)

3,415.66EUR