1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Circlick securite
2 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x Futaba Female 40 cm extension
2 x Extension silicon 30 cm male (Graupner)
1 x Extension silicon 50 cm (Graupner)
2 x Extension silicon 25 cm (Graupner)
2 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Cabel "Y" 30 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension silicon 25 cm (Futaba)
2 x Extension silicon 75 cm (Graupner)
1 x Extension silicon 100 cm (Graupner)
2 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 75 cm (Futaba)
2 x Extension silicon 10 cm (Futaba)
2 x Extension silicon 30 cm female (Futaba)
1 x Extension silicon 100 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
2 x Extension PVC 150 cm (Graupner)
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension 90 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension silicon 35 cm male (Futaba)
1 x 200 mm extensión servo HITEC/JR
1 x Extension 100 cm (Futaba)
2 x Futaba male 40 cm extension
1 x Extension 15 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
1 x Premium servo extension 25cm
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 30 cm female (Graupner)
1 x Cabel "Y" 15 cm
1 x Extension 7.5 cm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Prolongador S-Bus JR/JR 20cm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
2 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 1/12 Pilot "Cougar"
1 x "S" set for planes
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x 19 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 30 cm BEC cable (male)
1 x Giant Scale Muffler D.A. 70
1 x Spring Clip Ø25 mm
1 x Spring clamp for tube Ø29 mm ext 1pc
2 x Angle support XT60 conector
2 x Recessed MPX connector support (6 pcs)
2 x Support Antena 2.4 Ghz (2 pcs)
2 x Support pumb/filter Xicoy X45
1 x 1/6 Pilot "Cindy"
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "John"
1 x Turbina KINGTECH K180 G4+
1 x Turbine KINGTECH K100 G4
1 x GSU Kingtech
1 x Turbine KingTech K45G4+
1 x Burner Plug K30/ K45
1 x KingTech K45TP G4 Turboprop
1 x FOD Screen K140G/K180G/K210G
1 x Glases Flitemaster
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Multi-adapter balancer JST - TP
1 x Protector Connector Dean-T (1 pair)
1 x Turbina DRAGON 30 Kg
1 x BLUE Colored Liquid smoke for turbine 0.75 l
1 x Battery LiFe -3000/25C-3S 9.9V
1 x FESTO connector M7 Quick 6mm 90º
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x Quick hose connector 4-3 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x ABS tube 10.0x8.0x1000 mm
1 x LA500 pre-rotation gear hub
1 x LA500 cyclic central part
1 x LA500 pilot-seat set
2 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support Filtro FESTO
1 x Piston EME 35cc
1 x JR silicone servo wire 0,35 qmm / 5m
1 x EME ignition free wheel
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Cylinder EME 35 cc
1 x 25 mm carbon servo arm
1 x 102 mm INO spinner (carbon imitation)
1 x 18m Fitting barb
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Piñon motor autostarter 60cc
1 x 1/6 Pilot "Garry"
1 x Propeller pad and output shaft EME 55/60 cc
1 x T-Hose connector 4-4-4mm
1 x Rudder 2_Tray 3~3.5 inch
1 x Racor "Y" 3 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x LA500 tail empennage
1 x LA500 ciclic lever
1 x LA500 freewheel bearing
1 x Motor rotor LA-500
1 x LA500 front gear holder
2 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Charger LiPo Charger4
1 x Tapa estado carga XT-60 (6 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Support conector MPX (6 pcs)
1 x Support ECU Xicoy X-45
1 x Support pump Xicoy X45
1 x Support Pitot JETI
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Support FUEL DOT V3
1 x Soporte grifo FESTO (2 pcs)
2 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x Connectors banna oro 4 mm (M/F)
2 x EME 55 cc carburetor WALBRO
2 x Tape GFK 25 mm
2 x Male connector for 12 pines AWG
2 x Female connector for 16 pines AWG
2 x Connectors banna oro 0,8 mm (M/F)
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Combo RAY C3542-1000 + ESC 60A
1 x Cockpit aluminium closing 4.7g
1 x Cockpit plastic closing
17,418.76EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies