1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller POWER-PROP 7x7
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Surface Indicator Gauge Small
1 x Quicklock washer 1 mm (10 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x 2,5x60 mm allen screwdriver
1 x 250 mm / 16 mm Airbrakes
1 x SERVO HOLDER
1 x Plasti Dip Liquid Tape 429 ml black
1 x Support Filtro FESTO
1 x 
1 x Piñon motor rotor LA-500
1 x Wing OXY 5,0 m2
2 x 2 mm Prop Adapter M6
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Propeller CFK 11x8
1 x Support XT60 conector (2 pcs)
2 x RF9 Flight Simulator with Spektrum Controller
1 x 18 mm reinforced hinge
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Support FUEL DOT V3
1 x Z Bender - S Type Tool
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Propeller CFK 14x8
1 x Spray adhesive AEROFIX 2
1 x Digital precision scale up to 2000 g
3 x 2,3 mm Prop Adapter M6
1 x Propeller CFK 18x16
1 x Angle support XT60 conector
1 x Propeller CFK 15x16
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x 3,0x60 mm allen screwdriver
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Universal Colour Paste deep black 50 g
1 x Propeller RF CFK 13x6.5
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Propeller CFK 16x13
1 x Electric spoiler 250 mm (2 pcs)
2 x 3.2 mm Prop Adapter M6
2 x Extinguisher CO2 - 2 Kg
1 x Motor rotor LA-500
1 x Pilot LA 500
1 x Hovercraft sailcloth
2 x 3,2 mm Prop Adapter M8
1 x AXI 2217/20 V2
1 x AXI 2814/16 V2 Long
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Support Pitot JETI
1 x Servo GO-1013 MG 3.8kg
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Servo Tester
1 x FesEx-Uni6 System
1 x La Capitania di Venetia accesories
2 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x AXI 2820/12 CYCLONE
1 x Ferrita 14x8x5.5 mm
1 x Adaptadores carga 6s JST-XH
1 x Aero-Master Wings (Aero-naut)
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x USB programador GO servos
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x Recessed MPX connector support (6 pcs)
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
2 x Cooler motor type 300
2 x Indoor motor holder
2 x Circlik for shaft 3.2 mm (10 pcs)
2 x Pan Head Screw M1,6x6 (10 pcs)
2 x Socket Screw M3x9 mm
2 x Screw M2x6 (10 pcs)
2 x Motor mount M
1 x Aluminium M2x12 mm screw (4 pcs)
2 x Frontal support Speed 400/480
2 x Cargador para AA/AAA Ni-MH & Ni-Cd
2 x Floating M4 washer pad (36 pcs)
2 x Central support Speed 600
2 x Size "M" motor holder for class 400
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Interface Jack Adapter IKARUS
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Powerset FunJet 2 with Vectorcontrol unit
1 x Servo GO-1053 MG 20.0kg
1 x Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x 3 mm Prop Adapter M6
1 x Screw M3x12 (10 pcs)
1 x Cooler motor type 150
1 x 6 mm Prop Adapter M8
1 x Size "L" motor holder for class 600
1 x Socket Head Screw M2x8
1 x 5 mm Prop Adapter CN-Spinner
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Motor mount for 1 m models
1 x Motor holder AXI
1 x 4 mm Prop Adapter CN-Spinner
1 x Floating M3 washer pad (36 pcs)
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Cooler motor type 280
1 x 2.3 mm Adapter for 30 mm spinners
1 x 15 mm floating pad (30 pcs)
1 x Hacker A30-S Radial Set
1 x Screw M2.5x5 (10 pcs)
1 x Prop Shaft Adapter 5 mm "long"
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x Motor Scorpion HKIII 4035-560 Kv
1 x 5 mm Prop Adapter M8
1 x Frontal support Speed 280
1 x 
1 x EasyFLY Addon
1 x 
1 x Slave-cable USB Easy Sim
1 x Socket Screw M2x3 mm (4 pcs)
1 x Charger LiPo Charger4
1 x 4 mm Prop Adapter M6
2 x Radial heatsink for MPJ AC25/35-xx motor
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Motor Mount for Multiplex FunJet
1 x 2,3 mm Prop Adapter M6
1 x Pan head screw M2x16 PH
1 x Motor mount for 1200 mm models
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x 120x60 mm SLH KOVO wheel
1 x DUPLEX 2.4EX Central Box 220
1 x 10 mm Prop Adapter M12
1 x Screw M4x20 (10 pcs)
1 x Screw M3x5 (10 pcs)
1 x 4 mm Prop Adapter M8
1 x Fan for A60
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Screw M3x8(10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x Screw M2.5x10 (10 pcs)
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Screw M4x12 (10 pcs)
1 x Size "M" motor holder for class 600
1 x Tapping Screw M2.9x13 (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x Socket Head Screw M2x12
1 x Motor holder for AC 28/7
1 x Screw M2.5x8 (10 pcs)
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Fiberglass motor-holder for electric motors
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Socket Head Screw M2x10
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Screw M3x16 (10 pcs)
2 x Prop Shaft Adapter 5 mm/M8 "long"
1 x 6 mm Prop Adapter M8
2 x 3 mm Prop Adapter M6
1 x 5 mm Prop Adapter M6
1 x Central support Speed 280
1 x Frontal support Speed 600
1 x Socket Head Screw M2x5
1 x 10 mm gas motor standoff
1 x A50 Motor Mount Alu complete set
6,286.37EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies