430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Alu servo arm double RHINO
1 x SE Ring 240 mm (2 pcs)
1 x Extension MPX-MPX 20 cm
3 x 14x60 mm Mini rings Tie Wraps (4 pcs)
3 x SE Ring HACKER 300 mm (2 pcs)
2 x Tape GFK 25 mm
2 x SE Ring 400 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
3 x Foil for sticking flaps and ailerons
3 x 
1 x Spikes Band (5 m)
1 x Conector MR-60 (pareja)
1 x Crimping tool
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 330 mm (4 pcs)
3 x SE Ring 360 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Interface Realflight Simulator
1 x RF9 Flight Simulator with Spektrum Controller
1 x Ventral support for AX-18/AX-60
1 x Remote electric ignition system
1 x White smoke canister 65 g
2 x Smoke set "S"
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension lead 15 cm Multiplex
1 x 3l Smoke oil
1 x "S" set for boats
2 x Prolongador S-Bus JR/JR 10cm
2 x AX-60 starters (5 pcs)
1 x Cable S.BUS 3 salidas 100 mm
1 x Red smoke canister 100 g
2 x Extension silicon 10 cm (Futaba)
3 x Extension silicon 30 cm female (Futaba)
2 x 200 mm extensión servo HITEC/JR
2 x Prolongador S-Bus JR/JR 20cm
2 x Extension 30 cm (Futaba)
1 x Digital Air Speed Sensor And Pitot Tube Set
2 x Horn 6/20 with M3 Bearing
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
2 x Brass control horn M2 short for wire (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Small aluminium horn gold (2pcs)
1 x Horn 6/35 with M3 Bearing
2 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 6/27 with M3 Bearing
2 x Brass control horn M4 short for wire (4 pcs)
1 x Horn for flap control (1 pcs)
1 x Cable with accesories
1 x Horn 5/10 with M2 Bearing
2 x Horn with ball 40x30
1 x Horn 5/15 with M2 Bearing
1 x Horn 13,5x16 mm (2 pcs)
1 x Horn with ball 55x40
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Small aluminium horn blue (2pcs)
2 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x 20 mm carbon horn
1 x Brass control horn M3 short for wire (2 pcs)
1 x ABS Strip 1.0x5.0x1000 mm
2 x Servo MKS HV 777A+
1 x Servo MKS HV747
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Glases Moritz
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Servo SAVOX SA-1256 TG
1 x Surface Indicator Gauge Small
1 x Spray YELLOW Inca Lexan 150ml
1 x Servo KST A08H V6.0 3,2Kg HV
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
3 x SE Ring 480 mm (2 pcs)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x Servo GO-1053 MG 20.0kg
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Telemetry interface ALTIS to Futaba
1 x Support Flush MPX Conector (6 pcs)
1 x 10-15mm Servo Arm HITEC
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
2 x Jeti Black cap
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
2 x ZENOAH ZG26 SCM Marine Engine
2 x ZENOAH G270RC
2 x Reduction gear 2.8:1 for ZG 38 inline version
1 x Initior Receiver FRX2 Wireless
1 x Premium servo extension 75cm
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x White smoke bombs AX-3 (10 pcs)
1 x Green smoke canister 100 g
2 x Red smoke canister 65 g
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
2 x ZENOAH ZG 26SC with magneto ignition
2 x 18 mm wing servo holder
1 x 90x60 mm standart servo cover
2 x Servo TOPMODEL S7520 MG
2 x Telemetry interface ALTIS 20 cm
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x Premium servo extension 25cm
2 x PCARD Wireless System
1 x White smoke bombs AX-9 (10 pcs)
1 x Extension silicon 100 cm (Futaba)
1 x White smoke canister 100 g
1 x Extension silicon 25 cm (Futaba)
1 x "S" set for planes
2 x Extension silicon 35 cm male (Futaba)
1 x Initior Transmitter FTX2 Wireless
1 x Cable control set
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Horn 20x28,5 mm (2 pcs)
1 x Small aluminium horn red (2pcs)
2 x Brass control horn M2 long for wire (10pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
2 x Waterproof adhesive tape, width 19mm, length 25m
2 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
2 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
2 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Motor KAVAN PRO 2225-1600
2 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 300 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20x200 mm battery rings
1 x Tape GFK 38 mm
1 x Marker ties (20 pcs)
1 x Cinta Goldfix 1m
2 x SE Ring 250 mm (2 pcs)
2 x Servo GO-02 Digital 1.8g
2 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
2 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
2 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo GO-1013 MG 3.8kg
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Tape GFK 50 mm
1 x Servo GO-09 9g
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 2 mm Prop Adapter M5
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x 3 mm Short Prop Adapter M5
1 x 12 mm dogdrive props
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 4,0 mm M6
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Adapter 4,0 mm M8
1 x ULTIMATUM 2.0 m white
1 x Cabel "Y" 30 cm (Futaba)
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Extra long horn 60x30
1 x Micro control horn (2 pcs)
1 x Brass control horn M2 large for wire (2pcs)
1 x Oracover GREY Seafire Sea 2m
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller APC 14x8.5 Electric Pusher
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Prop Holder AXI 41xx V2
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Servo BLS-M55B 61.2kg
1 x Yellow smoke canister 140 g
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x Servo MKS HV6130
1 x ZENOAH ZG 80B
1 x ZENOAH/ZG 20cc
1 x 90x75 mm standart servo cover
1 x 58 mm micro servo cover
1 x 11 mm wing servo holder
1 x Servo TOPMODEL DS1413 T
1 x 57 mm micro-mini servo cover
1 x Ventus 1:4 set of instruments
1 x METEOR 1.000 mm kit
1 x Extension silicon 30 cm female (Graupner)
1 x Futaba male 40 cm extension
1 x White smoke canister 140 g
1 x AX-60 starters (5 pcs)
1 x 6 mm M3 variable horn
1 x Long horn 50x26
1 x Small control horn with bearing (2 pcs)
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Rudder forward 70x28 "type Kato"
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x Adjustable brass horn threaded M3
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x Rudder forward 90x28 "type Kato"
2 x Battery Protection Circuit Board 22.2v 6s
1 x Battery bed V2_M (black)
1 x Soporte grifo FESTO (2 pcs)
18,721.73EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies