1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x U Profile ABS 2,0x4,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
3 x ABS tube 7.0x6.0x1000 mm
2 x ABS tube 16.0x14.0x1000 mm
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x ABS tube 12.0x10.0x1000 mm
3 x ABS tube 8.0x7.0x1000 mm
2 x ABS tube 18.0x16.0x1000 mm
4 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x ABS tube 3.0x1.0x1000 mm
2 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x ABS tube 6.0x4.0x1000 mm
3 x ABS tube 4.0x2.0x1000 mm
3 x ABS tube 3.0x2.0x330 mm
2 x ABS tube 9.0x8.0x1000 mm
2 x ABS tube 5.0x4.0x156 mm
2 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 4.0x3.0x1000 mm
2 x ABS tube 6.0x5.0x1000 mm
2 x Towing hook
2 x SERVO HOLDER
2 x Tow hook for tug
1 x Propeller FALCON 32,5x11 PUSHER Carbono
2 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 1.5 mm x 1000 mm
3 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Straightened rod Ø 14.0 mm x 1000 mm
1 x PVC 0,35 qmm servos wire Graupner (100 m)
2 x 100m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cable Cargador FUTABA
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
2 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
2 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x White silicone 0,25 qmm wire (100 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x White silicone 0,25 mm² wire (25 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
2 x 10m servo "Premium" wire (white/red/blue)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x LASER 73" 1.85m (05) PILOT
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x 6 mm blue aluminium threaded horn with patella
1 x 1/12 Pilot "Langley"
1 x BALSA trip 8.0x8.0x1000 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Rubber profile 6-2 mm 2M
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
3 x ABS tube 14.0x10.0x1000 mm
2 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Towing hook <3m
1 x Fixed launching hook
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x 5 line servos wire black (1 m)
1 x Black silicone 0,25 mm² wire (25 m)
1 x ABS angle 10,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Motor DLE 200cc Premium Muffler
1 x ABS tube 20.0x18.0x1000 mm
1 x Carbon plate 350x150x1.0 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Oracover light Grey 2m
1 x Crimping tool
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Silicone red 1,5 qmm wire ( 25 m)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Wing OXY 5,0 m2
1 x Aramid 50 daN 50 m
2 x Servo HITEC HS-225 BB
2 x Servo case HS-225MG/225BB/5245MG
1 x Servo HITEC D645 MW
2 x Servo HITEC HS-311
1 x Servo Digital HITEC HS-5065 MG
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
2 x Brass rod Ø 1.5 mm x 1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 4.0 mm x 1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Silicone red 0,5 qmm wire ( 25 m)
1 x Silicone black 2,5 qmm wire ( 1 m)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Ball link M2,5 (10 pcs)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Ball link M3 (6 uds)
1 x Long ball link M1.6 (6 uds)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Fiberglass tube 6/4x1000mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Gearbox KPG27/28 4,7:1pinion
1 x Adjustable launching hook
1 x Gear set HITEC HS-311/322/325BB
1 x Gear set HITEC HS-125MG/5125MG
1 x Gear set HITEC HS-56 HB
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC HS-7955 TG Coreless Digi
1 x Servo HITEC HS-55
1 x Servo HITEC HS-7975 TG
1 x Gear set HITEC HS-7950TH
1 x 3-blades 20x12 carbon prop Super Silence
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Pilot JAN 1/4 Saiplanes
1 x Servo HITEC HS-81
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo HITEC HS-85 MG
1 x Servo HITEC HS-45 HB, servo box
1 x Gear set HITEC HS-65 HB
1 x Servo HITEC HS-85 BB
1 x Servo HITEC HS-45 HB
1 x Servo HITEC HS-7954 SH Digital High
1 x Gear set HITEC D645 MW
1 x Servo HITEC HS-70 MG
1 x Gear set HITEC HS-55
1 x Servo HITEC HSB-9380TH
1 x Gear carbonite set HITEC HS-6965
1 x Servo HITEC HS-7115 TH
1 x Servo HITEC HS-5087 MH
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC HS-77 BB Low Profile
1 x Servo HITEC HS-65 HB
1 x Servo HITEC HS-65 MG
1 x Servo HITEC HS-645 MG
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Servo HITEC HS-5485 HB Digi
1 x Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser
1 x Servo HITEC HSB-9370TH
1 x Servo HS-5765MH High Voltage
1 x Gear set HITEC HS-85
1 x Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo
1 x Servo HS-7980TH digi high voltage ultra torque
1 x Servo HITEC HS-325 BB
1 x Servo HITEC HS-53
1 x Servo HITEC HS-82 MG
1 x Servo HITEC HS-225 MG
1 x Servo HITEC HSB-9360TH
1 x Servo HITEC HS-635HB Carbonite
1 x Servo HITEC HS-56 BB
1 x Gear set HITEC HS-225
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Screws set for Hitec MG arms servo
1 x Gear set HITEC HS-81
1 x Servo HITEC HS-5805 MG Digi
1 x Servo HITEC HS-485 HB
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Suncover 100cc Red
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x 24x10 prop Super Silence
1 x 3-blades 27x12 carbon prop Super Silence
1 x 3-blades 29x12 carbon prop Super Silence
1 x Propeller APC 9x6 Glow/Gas
1 x Propeller APC 10x4 Glow/Gas
1 x Propeller FALCON 27x10 3-BL carbono-gas
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x FALCON 28X10 CARBON PROPELLER (GAS)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x FALCON 26X10 CARBON PROPELLER (GAS)
1 x 6 mm Quick clamp_S (10 pcs)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Protective Cover for wires Ø 3 mm 1000 mm
2 x DLE 55 carburetor
1 x Extension Arm for Carburetor
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x MEGA GEAR 16 3,1:1 Gearbox
1 x FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent)
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Hose clips 6 mm
14,341.46EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies