Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001352

165.00EUR

Epoxy L 40 min. 10 kg (Resin)
[R1001352]


Epoxy L 40 min. 10 kg (Resin)

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).


under request
under request

Reviews

Customers who bought this product also purchased
T- Fittings blue color (2pcs)
T- Fittings blue color (2pcs)

under request
under request

Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)

under request
under request

Silicone red 2,5 qmm wire ( 25 m)
Silicone red 2,5 qmm wire ( 25 m)

under request
under request

XT-60 connector (female)
XT-60 connector (female)

under request
under request

Silicon black 2,5 qmm cable ( 25 m)
Silicon black 2,5 qmm cable ( 25 m)

under request
under request

Connectors MPX male
Connectors MPX male

under request
under request

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
28x12 BIELA propeller (3-blades)
28x12 BIELA propeller (3-blades)
145.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Shirt Hispano Aviación
1 x Softshell Hispano Aviación
1 x Cap Hispano Aviación
2 x Vest clothes Hispano Aviación
1 x Propeller POWER-PROP 14x9 Izda
1 x Oracover CHROME 2m
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Adapter lead MPX/EC3
1 x Aluminium cap bolt washer M4 red (8 pcs)
2 x Blind nut M2 (10 pcs)
1 x Smoke set "M"
2 x Aluminium wide washer M4 Black (4 pcs)
2 x White smoke canister 100 g
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
2 x XH male balance (4S) connector (2 pcs)
1 x Connector CAN 15
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Extension silicon 30 cm male (Graupner)
2 x Prolongador S-Bus JR/JR 20cm
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x Circlick securite
1 x Support Filtro FESTO
1 x 12 mm floating pad (49 pcs)
1 x Horn DUBRO 1/2A
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Horn with ball 40x30
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Extension 100 cm (Futaba)
1 x Adjustable brass horn threaded M3
2 x Yellow smoke canister 65 g
1 x 10 mm floating pad (72 pcs)
1 x Straightened rod Ø 1.5 mm x 1000 mm
2 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Presto SF Light Filler styrene-free (420 g)
1 x Extra long horn 60x30
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Universal Colour Paste deep black 250 g
2 x White smoke bombs AX-3 (10 pcs)
2 x XH female balance (5S) connector (2 pcs)
1 x Universal Colour Paste deep black 50 g
1 x Horn mando long (2 pcs)
1 x 30 cm DEANS female connector
1 x USB HLS prog. interface
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Ball link duraluminium M3 V1 (10 pcs)
2 x 1 m servo "Premium" wire (white/red/blue)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 1/7 Pilot "Japanese"
1 x Pin hinge 34x16 mm (10 uds)
1 x Interface Realflight Simulator
2 x Protective Cover for wires Ø 6 mm 1000 mm
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SIMtransmitter 6 Mode 2
1 x 25 mm Sandpaper file
1 x Propeller balancer
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x 
1 x Pilot "Dick" Legends Series (Slimline)
1 x Foil for sticking flaps and ailerons
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Pilot "Goose" (Slimline)
1 x A/C quality beech plywood 600x300x5.0 mm
2 x 100m servo "Premium" wire (white/red/blue)
1 x WingFix ULTRA Black Edition
1 x Pin hinge 26x11 mm (10 uds)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Spikes Band (5 m)
1 x Copier 5x20 cm pcs
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x 10m servo "Premium" wire (white/red/blue)
1 x Large flex hinge (12 uds)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Pilot JAN 1/4 Saiplanes
1 x Medium pin type hinge (12 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
2 x Ring 320 mm length (5 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x 3,0x60 mm allen screwdriver
2 x Strip 2,5x1,25x330 mm
1 x Round Rod 1,5x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Ferrita 17x10x6.5 mm
2 x ABS Strip 1.0x2.0x1000 mm
1 x Ferrita 27x14x7 mm
1 x ABS Strip 1.5x8.0x1000 mm
2 x Strip 1,5x1,5x330 mm
1 x Motor rotor LA-500
1 x LA500 nose
2 x LA500 housing-lower cyclic
1 x LA500 ciclic lever
1 x LA500 rotor head core
1 x Pilot LA 500
1 x LA500 pilot-seat set
1 x Nut for mounting M5 (4 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x 3l Smoke oil
1 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 75 cm (Graupner)
1 x Protector Connector Dean-T (1 pair)
2 x Yellow smoke canister 100 g
1 x Extension silicon 100 cm (Futaba)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x MPX housing with flange (4 pcs)
1 x MPX PCB "Gender-Changer (5 pcs)
1 x Blue smoke canister 100 g
1 x Cabel "Y" 30 cm (graupner)
1 x Smoke set "S"
1 x Female connector for 6 pines AWG
1 x Prolonguer for Balancer Thunder Power 6S
1 x TrainerCord (master-learner)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x 5 line servos wire black (1 m)
1 x BALSA trip 8.0x8.0x1000 mm
2 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x SE Ring 480 mm (2 pcs)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Cable Cargador FUTABA
1 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x Hexagonal Nut M2 (10 pcs)
2 x Threaded insert M6 (10 pcs)
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
2 x Yellow smoke canister 140 g
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension 90 cm (Futaba)
3 x Initior Receiver FRX2 Wireless
3 x Plastic caps for AIR BURTS (30 pcs)
1 x Parachutist
1 x Red 3m5 mm connector holder
1 x Extension 30 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Servo Connector Brackets (10 pcs)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x MR30 connector female
1 x Extension silicon 25 cm (Graupner)
1 x MPX screwable clips (4 pcs)
1 x Extension 7.5 cm
1 x Black smoke bombs AX-60 (5 pcs)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x MPX Support
1 x Extension silicon 30 cm female (Graupner)
1 x Cabel "Y" 15 cm
1 x XH LiPo extension lead
1 x Extension silicon 30 cm female (Futaba)
1 x Futaba male 40 cm extension
1 x Extension silicon 50 cm (Futaba)
1 x Bag connector 2 mm
1 x Green smoke canister 140 g
1 x Red smoke canister 100 g
1 x MPX PCB "4 Pins", 5 pieces
1 x Extension silicon 10 cm (Futaba)
1 x Red 4 mm connector holder
1 x Ventral support for AX-18/AX-60
1 x Mounting frame MPX female connector
2 x Wing connector 8pin with pin strip, plug & socket
1 x "S" set for planes
1 x MPX screwable clips (5 pcs)
1 x Red smoke canister 140 g
1 x Extension silicon 35 cm (Futaba)
1 x White smoke canister 65 g
1 x "S" set for boats
1 x Green smoke canister 100 g
1 x "M" set
2 x XT-90 connector (pair)
2 x Wing conexion 2 servos Futaba 50 cm
1 x Protector Connector MPX (1 pair)
1 x AX-60 starters (5 pcs)
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 35 cm male (Futaba)
1 x Conector XT-150 6mm (Set: 5 pares)
3 x Initior Transmitter FTX2 Wireless
1 x Connectors MPX black female
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Conector XT-30 (macho)
1 x PIN Connector female (100 pcs)
1 x Red smoke canister 65 g
1 x 30 cm MULTIPLEX female connector
2 x PCARD Wireless System
1 x Futaba Female 40 cm extension
1 x Green smoke canister 65 g
1 x Contacto macho pin conector (10 pcs)
1 x Futaba Female 40 cm extension
1 x MR30 connector male
1 x Extension 2/3 lipos JST/C
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x 2 LiPo XH>EH adapter
1 x CC 02
1 x Male connector for 6 pines AWG
1 x PSC 5
1 x 30 cm BEC cable (male)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CC 05
1 x CC 01
1 x 4 LiPo XH>EH adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 30 cm BEC cable (female)
1 x Male Prolonger TP 4/5S
1 x BALSA trip 5.0x5.0x1000 mm
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Cable set Premium™ MAXI "one4two"
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x SE Ring 450 mm (2 pcs)
1 x Pine wood slat 10x10x1000 mm
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Black silicone 1,0 qmm wire (50 m)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x BALSA trip 10x10x1000 mm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA triangular 10x10x1000 mm
2 x 6 mm Quick clamp_S (10 pcs)
1 x Tape GFK 50 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Marker ties (20 pcs)
1 x Cable set PREMIUM , fuselage/wing one4one
2 x 50m servo "Premium" wire (white/red/blue)
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Cinta Goldfix 1m
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x 10 mm Quick clamp_L (6 pcs)
1 x Green silicone 0,25 qmm wire (50 m)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Pine wood slat 5.0x5.0x1000 mm
1 x SE Ring 400 mm (2 pcs)
1 x Trailing edge BALSA 35x8x1000 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Propeller RF CFK 10x17
1 x Propeller CFK 18x19
1 x Balsa panel 1.5x100x1000 mm
1 x Propeller CFK 15x13
1 x Balsa panel 8.0x100x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Propeller CFK 16x16 Slim
1 x Propeller RF CFK 16x8,5 S
1 x Balsa panel 6.0x100x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Propeller CFK 16x17
1 x Strip ABS 2.0x5.0x1000 mm
1 x Propeller CFK 20x13 "white"
1 x ABS Strip 1.5x4.0x1000 mm
2 x Round Rod 1,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x ESC ALPHA 60A HV
1 x Nut for mounting M3 (4 pcs)
1 x LA500 pre-rotation gear
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Premium servo extension 50cm
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x Socket Head Screw M2x8
1 x Tornillo cabeza boton M4x12 mm (5 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
2 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x XH female balance (4S) connector (2 pcs)
1 x XT-30 connector (pair)
1 x XT-60 connector (male)
1 x White smoke bombs AX-18 (5 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Jeti Black cap
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Socket Head Screw M2x12
1 x Socket Head Screw M2x5
1 x Spring pin Ø 1 x 6 mm (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x XT-60 connector (female)
1 x Conector Servo female 4 pines
1 x Banna gold connector 2,5 mm (M/F)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x MXS-C (Mini) Blue
1 x Disposable Injector Bags (30x16cm) 100 pcs
7,436.14EUR
Manufacturers
Manufacturer Info
R-G.de
- R-G.de Homepage
- Other products
Notifications
NotificationsNotify me of updates to Epoxy L 40 min. 10 kg (Resin)
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce