1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Modulo Bluetooh JETCENTRAL
1 x Bomba Humo Variable
1 x Pipa Jet 40N-80N (200 mm)
2 x Sensor telemetria SPEKTRUM
1 x Sensor telemetria JETI
1 x Pipa Jet 160N-250N (120/130 mm)
1 x Colador protector turbina 94 x 34 mm
1 x Colador protector turbina 94 x 32 mm
1 x Tubo humo turbina acero
1 x Turbina HORNET 85 SE
2 x Turbina LYNX 130
1 x Turbina MAMMOTH 25.4 Kg
1 x Turbo Prop KS
1 x Pipa Jet A-10 Skymaster (set 2 pcs)
1 x Aditivo antiestatico JETCAT 120 ml
1 x Colador protector turbina K140/180/210
1 x Turbina CHEETAH 160 SE
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Pendulo "Special" depositos 60g
1 x KingTech K100TP G4+ Turboprop
2 x Turbina KINGTECH K85 G4
1 x Bateria LiFe 3800 mAh 3s 25C
1 x Filtro KingTech
1 x Aceite turbina KINGTECH 5L
1 x Turbina RABBIT 100 SE 11 Kg
1 x HBC 10035-3 32-Bit
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Acople ALU M2,5 Ø 6 (2 uds)
2 x Ball Link ALU M3 - RH (1 pcs)
2 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x USBCOM 5i
1 x Brazo aluminio ALU-STAR
1 x Ball link Aluminio M3 (2 pcs)
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Acoplador "Z" Ø 2 (2 uds)
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Bateria LiFe 3000 mAh 3s 25C
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Colador protector turbina K45/60/70/85
1 x Bomba KP500V Kingtech
1 x Bateria LiFe 2100 mAh 3s 25C
1 x Aceite turbina KINGTECH 1L
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x Fundas alas/cola ASPIRE
1 x Terminales riostras M2,5 (2 pcs)
1 x Ball link aluminio M3 V1 (10 pcs)
1 x Terminales riostras M3 (10 uds)
1 x Terminales riostras M2 (10 uds)
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Clevis con trasmisión M3
1 x Ball link ALU M2/2 con rodamiento (1 pcs)
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Hélice MEJZLIK 20x13 Electric light (41 g)
1 x DUPLEX 2,4 EX MBar
1 x ASPIRE Navy ARF 2.000 mm
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x Duplex 2.4 EX TopFuel Lector MTAG Battery
1 x F-16 Scale 1:6 (1.630 mm)
1 x Stick DUPLEX con interruptor 3 posiciones para DC/DS
1 x Bateria RX JETI LiIon RB 5200 7.2v
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable en Y
1 x Kwik link negro largo (10 pcs)
1 x Polea de bronce 4/1,5 (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Tensor de riostras M2x29/43 (2pcs)
1 x Terminales riostras M3x16 (2 uds)
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Polea de bronce 5/1,5 (2 pcs)
2 x Terminales riostras M6x66 (2 uds)
1 x Ball link M2 (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Receptor R7008HV compatible FUTABA
1 x Pala carbono 3D 230 mm
1 x Pala carbono 230 mm
1 x Kit de conversión HIROBO EX/EAGLE elektro
1 x Rotor blade 3Bl Scale 1050R
1 x Colador protector turbina 73 x 32 mm
39,962.81EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas