Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Hardener Aero EPH 161 (250 g)
1 x	MEKP Harderner 100 g
1 x	resin-hardener package L-385 with hardener H-385
1 x	Hardener Aero EPH 161 (500 g)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler M2 (10 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Propeller POWER-PROP 13x9
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Propeller POWER-PROP 14x9
1 x	SE Ring 450 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Tube Pitot to PIXHAWK
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	USB Mini Camera endoscope
1 x	800TVL CMOS camera for FPV
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Extinguisher CO2 - 2 Kg
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Horn 6/35 with M3 Bearing
1 x	White smoke canister 65 g
1 x	Ball link M3 RPA's-UAV's
1 x	M3 Maxi ball link (2 uds)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Wire easy tensioner (red)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Small kwik link (10 pcs)
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Landing gear Rocket 400
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Mobile Terminal
2 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Angled clevis with threaded rod M3
1 x	Oracover GREY Seafire Sea 2m
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Motor KAVAN PRO 2225-1600
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Prop Holder AXI 41xx V2
1 x	DJI Mavic Air Fly More Combo
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	2.3 mm Adapter for 30 mm spinners
1 x	10x7 tree blades propeller
1 x	15x7 tree blades propeller LEFT
1 x	10 mm Prop Adapter M12
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	3 mm Prop Adapter M6
1 x	16x10 tree blades propeller Master Airscrew
1 x	10 mm portholes (10 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	Motor A20-26 M EVO
1 x	Shaft for A60-20/22/24S (120 mm)
1 x	OS Engine 105HZ-R Heli with pipe 105
1 x	Motor OS 3820-1200 electric
1 x	MIG AC 400 /14
1 x	OS Engine 105HZ-R Heli
1 x	XPower XC4226/12 LS
1 x	Propeller electric carbon 10x8
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	White smoke bombs AX-3 (10 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Size "L" motor holder for class 600
1 x	Actuador lineal HLS12-100210-7.4v
1 x	KIRA 600-22 6,7:1
1 x	KIRA 600-20 6,7:1
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Motor A60-6XS V4 28-pole kv370
1 x	Shaft for A60-L (140mm)
1 x	Dumper propeller 6/8 mm
1 x	Parachute expulsion foam
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	290x4 mm M4 shaft ship
1 x	B4-0 rocket charges (6 pcs)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Rocket D9-7
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Glases Stratus
1 x	Glases Moritz
1 x	Glases Innovation Plus
1 x	Glases Ace
1 x	Glases Nimbus
1 x	Receiver bed (Blue)
1 x	Size "M" motor holder for class 600
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	Central support Speed 280
2 x	Cable video GoPro
2 x	Propeller CFK 12.5x6.5
2 x	Propeller CFK 23x12
1 x	Propeller CFK 18x16

7,170.37EUR