1 x | 30 cm BEC cable (male) |
1 x | BEC 3A FOXY |
2 x | TP/TopFuel - XH 2/3S Adapter |
3 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 3 LiPo XH>EH adapter |
2 x | APM2.6 Power module with 5.3V DC BEC |
2 x | CC 02 |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Extension lead 15 cm Multiplex |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Premium servo extension 75cm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
3 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Cabel "Y" 15 cm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 300 mm |
3 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Premium servo extension 100cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Extension silicon 30 cm male (Graupner) |
4 x | Futaba male 40 cm extension |
1 x | Extension silicon 30 cm male (Futaba) |
3 x | Prolongador S-Bus JR/JR 10cm |
1 x | Futaba Female 40 cm extension |
2 x | Extension 15 cm (Futaba) |
2 x | Extension silicon 100 cm (Graupner) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Extension PVC 150 cm (Graupner) |
2 x | Premium servo extension 50cm |
2 x | Extension 7.5 cm |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Ferrita con funda |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension 90 cm (Futaba) |
1 x | Adapter lead MPX/XT60 |
1 x | Ball joint long |
2 x | Head core bushing |
2 x | Baering 3x8x4 |
1 x | SPARK Switch 12v |
1 x | Female connector for 20 pines AWG |
2 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | Female connector for 6 pines AWG |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Hacker X-Pro USB interface V2 |
1 x | Selfstart electronic switch |
2 x | USB HLS prog. interface |
1 x | MPX-Dean "T" Adapter |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Male Prolonger TP 4/5S |
2 x | PSC 5 |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Long Switch On/Off micro |
1 x | Extension 5 lipos JST - JST/C |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | CC 03 |
3 x | SBEC Jeti |
1 x | Electronic switch JETI SP06 Opto |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
3 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | SBEC 30 D |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Multi-adapter balancer JST/C - TP |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | EWC3 40 cm wing connector |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | CC 01 |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | TrainerCord (master-learner) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Circlick securite |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | SPS 70V 100/200 A |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | MAX BEC 2D plus EX |
1 x | Switching module high voltage SXH |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | 2 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | SPARK Switch 7.4v |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | CC 05 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | UBEC 6A KAVAN |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Adjustable launching hook |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Extension 100 cm (Futaba) |
1 x | Extension silicon 25 cm (Futaba) |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Circlick securite |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Complet landing gear |
2 x | Tail boom |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Bearing housing |
1 x | Screw M3x16 |
1 x | Side Plate |
1 x | Rotorshape Elevator |
1 x | Blade holder upper |
1 x | Nut M2 securing |
2 x | AC-10 pre-rotacion with motor |
1 x | Wheel keeper washer |
1 x | Blade Holder Full (3 blades) |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery |
1 x | Screws flush mount M2 |
2 x | SWTU2 switch |
1 x | USB interface ALTIS |
1 x | Head upper part |
1 x | Hose stopper 4 mm |
1 x | Landing gear strap small (4 uds) |
1 x | Tailwheel for F3A size |
1 x | Mini neumatic retract landing gear |
1 x | Hose connector stopper 4 mm |
1 x | Manometer 4 mm |
1 x | MAX BEC 2 |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | |
2 x | Magnetic Interruptor MULTIPLEX |
1 x | Propeller POWER-PROP 12x8 |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Balls 4 mm |
1 x | Rotorhead pushrod |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Opto Gas Engine Kill Switch |
1 x | Head lower part New |
1 x | SPS Remote switch actuator |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | FX three-position switched channel, long |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | SPARK Switch 5.9v |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | JETImodel DPS 40 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | 1/12 Pilot "Langley" |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | 1/12 Pilot "Tom" |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Male connector for 16 pines AWG |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | Fiberglass tube 6/4x1000mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Multi-adapter balancer JST - TP |
1 x | SBEC 40 |
1 x | PowerBox SparkSwitch RS |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Extension 2/3 lipos JST/C |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller electric carbon 10x7 |
1 x | Propeller electric carbon 10.5x8 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Universal batery Tester |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Extension 30 cm (Futaba) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | LA500 Autogyro |
|
7,878.32EUR |