Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Silicone red 2,5 qmm wire ( 25 m) temporarily out of stock	XT-60 connector (female) temporarily out of stock	Silicone black 6,0 qmm wire (25 m) temporarily out of stock
Connectors MPX male temporarily out of stock	Check valve V2 temporarily out of stock	Red smoke canister 65 g temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Jet Pipe for ULTIMATUM 2m
155.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Balsa panel 4.0x100x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
2 x	BALSA triangular 10x10x1000 mm
1 x	Parachute P4
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Trike XL motor set (motor+esc+prop)
1 x	Ballast 700gr OPALE
1 x	Paramotor BackPack XXS 2
1 x	Long pinned hinge (6 uds)
1 x	Socket head ball link M3 (2 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Miniature brass strap hinge, 1 m
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
4 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
2 x	Marker ties (20 pcs)
1 x	Digital precision scale up to 2000 g
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 3.0x1.0x1000 mm
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Adapter lead MPX/EC3
1 x	Profile ABS triangular 2.0x1000 mm 90º
2 x	Round Rod 1,25x1000 mm
1 x	Dust collector for mould cleaning
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	Ferrita con funda
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Rubber profile 6-2 mm 2M
1 x	Vacuum pump 12 CFM
1 x	Z Bender - S Type Tool
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
2 x	38x4,5 mm wires output (2 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	80 mm rods set for direction control
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Moki Exhaust Bend 200 mm
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
4 x	Xplorer1 anemometro
2 x	USB Mini Camera endoscope
1 x	1/10 Pilot "Jack"
1 x	Trailing edge BALSA 35x8x1000 mm
2 x	White aluminium 230 mm landing gear
1 x	101x28 mm (4.0") Type jets aluminium core wheel
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	1/6 Pilot "John"
1 x	SE Ring 300 mm (2 pcs)
1 x	USB Adaptor OPTronics
1 x	Vacuum pump P1-N
1 x	TYGON tubo 15 m Diam. 3.4 x 2.0 mm
1 x	280 cc gasoline fuel tank complet
3 x	Z Bender - S Type Tool
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 3,0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Tachometer Hyperion Multi-pala
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	CC 03
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Cabel charger transmitter GRAUPNER
1 x	CC 02
1 x	USB HLS prog. interface
3 x	Xplorer4 anemometro
2 x	Xplorer3 anemometro
3 x	Connectors banna oro 4 mm (M/F)
2 x	200 mm extensión servo HITEC/JR
1 x	Tube bender
2 x	160 mm carbon undercarriage (2pcs)
1 x	1/12 Pilot "Langley"
1 x	Two-function control switch + button by FUTABA
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	10 mm gas motor standoff
1 x	102 mm aluminium spinner
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 350 mm (2 pcs)
2 x	20x200 mm battery rings
1 x	Tube support Ø 6mm (10 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	110x55 mm SLH KOVO wheel
1 x	1/6 Pilot "Cindy"
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "Tony"
1 x	18m Fitting barb
1 x	1/7 Pilot "Japanese"
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Wing OXY 0,5 pulgadas2
1 x
1 x	SE Ring 450 mm (2 pcs)
1 x	110x55 mm C SLH KOVO wheel
1 x	White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
2 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Xplorer2 anemometro
1 x	1/10 Pilot "Jimmy"
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	1000 cc gasoline fuel tank complet
1 x	Tape GFK 50 mm
1 x	Tape GFK 25 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Tygon tube 4.8 x 3.2 mm 15 m
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Tubo Teflon Ø25 mm x 10cm
1 x	Tren de cola carbono 50-70cc
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	22m Fitting barb
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
2 x	Tray for FUTABA 14SG/16SZ
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	EC-Cutter
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Smart Soldering Iron 110W/230V AC
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Welder 100W/200V
1 x	Circlick securite
1 x	Heat Seal Iron
1 x	Propeller diller for DLE111 and DA85-150
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x
1 x	Copier 2x20 cm pcs
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Nose leg 155 mm with wheels 70 mm
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Indoor landing gear set
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	DUPLEX 2.4EX RC Switch
1 x	Horn 6/27 with M3 Bearing
1 x	Cable adapter iCharger
2 x	Premium servo extension 75cm
3 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension 90 cm (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Conector BEC male (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Glases Innovation Plus
1 x	Glases Flitemaster
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Propadapter for motor A60-V2
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Extension 7.5 cm
1 x	Premium servo extension 25cm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Futaba male 40 cm extension
1 x	Extension 15 cm (Futaba)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 100 cm (Graupner)
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension lead 15 cm Multiplex
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Circlick securite
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension 100 cm (Futaba)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	MultiLog Altimeter
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	70 mm aluminium spinner.
2 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
2 x	38 mm aluminium spinner.
1 x	64 mm aluminium spinner
1 x	PowerBox Sensor V3 MPX/Jr
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	AC-10 pre-rotacion with motor
1 x	SE Ring 200 mm (2 pcs)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	F3A carbon 95 mm spinner
1 x	Starter 12v (Max 90 and 15ccm)
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	TX-Tray V1 (L) (Red)
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
3 x	Baseplate servo
1 x	SD HC 8 GB
1 x	Silicone black 6,0 qmm wire ( 1 m)
2 x	75 mm spinner (Carbon Imitation)
1 x	Hot Glue Stick RED
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Carbon plate 350x150x2.0 mm
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Charger SKY RC D200 neo
3 x	63 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
2 x	57 mm INO spinner (carbon imitation)
1 x	Oils Pumps Empty (1 liter)
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Carburator Moki S400
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	75 mm INO spinner (carbon imitation)
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Spinner INOVA 45 mm White
1 x	Switch Cap L (Blue)
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Transmitter SPEKTRUM DX-9 (Only TX)
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	290x4 mm M4 shaft ship
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	DC Small for MultiLog & UltraLight
1 x	RX external cable for estandar receivers
1 x	51 mm INO spinner (carbon imitation)
2 x	Ball Link Plier
1 x	BALSA trip 10x10x1000 mm
1 x	82 mm INO spinner (carbon imitation)
1 x	Angle support XT60 conector
1 x	70 mm INO spinner (carbon imitation)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
2 x	73x24 mm hard foam KOVO wheel (2 pcs)
1 x	45 mm aluminium spinner.
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	76 mm aluminium spinner.
1 x	Hot Glue Stick BLACK
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Aero shocks
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	45x19 mm hard foam KOVO wheel (2 pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	89x25 mm (3.50") Type jets aluminium core wheel
1 x	Antenna holder bracket double
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	82 mm aluminium spinner.
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	Carbon plate 350x150x1.5 mm
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Aluminium servo arm (2 uds)
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	60x25 mm tail wheel "type F3A"
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	Hot Glue Stick GREEN
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	57 mm aluminium spinner.
1 x	Cockpit aluminium closing 4.7g
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	Combo FOXY C3530-700 + FOXY 80 amp

11,911.56EUR