1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Listón de HAYA redondo 3,0 x 1000 mm
2 x Plancha de balsa 3,0x100x1000 mm
1 x Listón de BALSA 5,0x5,0x1000 mm
1 x Plancha contrachapado Abedul 600x300x0,6 mm
1 x Plancha de balsa 4,0x100x1000 mm
1 x Plancha contrachapado Abedul 600x300x0,8 mm
1 x Listón de BALSA 3,0x3,0x1000 mm
1 x Listón de BALSA 4,0x4,0x1000 mm
1 x Plancha contrachapado Abedul 600x300x5,0 mm
1 x Plancha de balsa 1,0x100x1000 mm
1 x Plancha de balsa 10x100x1000 mm
1 x Plancha de balsa 2,0x100x1000 mm
1 x Plancha de balsa 6,0x100x1000 mm
1 x Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x Plancha contrachapado Abedul 600x300x3,0 mm
1 x Plancha contrachapado Abedul 600x300x1,5 mm
1 x Listón triangular de BALSA 15x15x1000 mm
1 x Plancha contrachapado Abedul 600x300x4,0 mm
1 x Cable simulador USB multiplayer
2 x Piloto 1/4 "Mike"
1 x Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x Piloto 1/6 "Garry"
1 x Piloto JAN 1/4 Veleros
1 x Piloto 1/10 "Jimmy"
2 x Piloto RC Civil 1/5- 1/6 Scale 12"
2 x Piloto "Adolf" Legends Series(Slimline)
1 x Piloto 1/12 "Fighter"
2 x Piloto 1/7 "Japonés"
2 x Piloto "Dick" Legends Series(Slimline)
1 x Piloto 1/12 "Tom"
1 x Piloto "Duke" Legends Series(Slimline)
2 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 4,5 mm x 1000 mm
3 x Varilla latón Ø 0,8 mm x 1000 mm
2 x Varilla acero Ø 6,0 mm x 1000 mm
2 x Varilla acero Ø 1,5 mm x 1500 mm
2 x Tubo Pitot para PIXHAWK
1 x Rótula corta M1.6 con bola/base (6 uds)
1 x Set de Humo "S"
1 x Listón de CAOBA 1,5x1,5x1000 mm
1 x Oracover Negro 2 m
1 x Listón triangular de BALSA 10x10x1000 mm
1 x Plancha de balsa 2,5x100x1000 mm
1 x Plancha contrachapado "Economy" 600x300x6,0 mm
1 x Cristal de Emisora 35 Mc/s Ch 62
1 x Capuchón decorativo interruptores TX cortos
1 x Helice Race 40 mm 1/4"(hélice derecha)
1 x Antena RX 150 mm HoTT
1 x Emisora MZ-10, 5 Ch HoTT
1 x Conector JAPAN G2 Set 5 pares
1 x Helice G-Sonic 20x8
1 x Manómetro de 4 mm
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Piloto civil "Joe" tamaño 9cm (Slimline)
1 x Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Varilla acero Ø 5,0 mm x 1000 mm
1 x Varilla acero Ø 0,5 mm x 1000 mm
1 x Varilla latón Ø 1,0 mm x 1000 mm
1 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x Piloto Jet "Red" 1/6 Scale
1 x Piloto 1/6 "John"
1 x Varilla acero Ø 7,0 mm x 1000 mm
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
2 x Varilla acero Ø 1,5 mm x 1000 mm
1 x Varilla acero Ø 2,0 mm x 1000 mm
1 x Piloto Jet "Green" 1/6 Scale
1 x Piloto 1/4 "Heidi"
2 x Prisionero aluminio 2.5 mm Ø (4 uds)
1 x Prisionero aluminio 3 mm Ø (4 uds)
1 x Prisionero 4 mm Ø (4 uds)
2 x Prisionero aluminio 4 mm Ø (4 uds)
1 x Aero frenos eléctricos para veleros 440 mm (2 pcs)
1 x Cabina Sweet / Siesta
2 x Prisionero aluminio 3.5 mm Ø (4 uds)
2 x Prisionero aluminio 6 mm Ø (4 uds)
2 x Prisionero aluminio 5 mm Ø (4 uds)
2 x Sensor digital Air Speed con Pitot
2 x Tubo ABS 5,0x4,0x1000 mm
1 x Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x BULL MØ1 2.600mm "AeroPANDA"
1 x Interface REVOLECTRIX USB para CellPRO 10s
1 x Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
1 x BULL MØ1 2.600mm "McLAREN-GULF"
2 x BULL MØ1 2.600mm YELLOW
1 x BULL MØ1 2.600mm BLUE
1 x BULL MØ1 2.600mm ORANGE
1 x Rueda de cola de 28 mm
1 x Brazo aluminio ALU-STAR
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Soporte metal para servos
1 x Plancha de goma espuma (310x210x5 mm)
1 x SIMtransmitter 6 Modo 2
1 x CM-3
1 x EasyFLY Addon
1 x Interface Jack Adapter IKARUS
1 x Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x Prisionero 3 mm Ø (4 uds)
1 x Guardabarros ruedas 140/165 mm
1 x Prisionero 5 mm Ø (4 uds)
1 x Carga cohete D9-7
1 x Soporte Guia Antena doble
1 x Prolongador Cable S-Bus
1 x Piñones servo FUTABA BLS255/272/471SV
1 x FUTABA F14 + R168DF + Servo S148
1 x Varilla acero Ø 1,0 mm x 1000 mm
1 x Maleta FUTABA Aluminio
1 x Regulador MasterSPIN 66 Pro
1 x Piloto 1/6 "Cindy"
1 x Regulador MasterSPIN 75 Pro OPTO
1 x Prisionero 2 mm Ø (4 uds)
1 x Prisionero aluminio 2 mm Ø (4 uds)
1 x Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado
2 x Tubo ABS 9,0x8,0x1000 mm
2 x Tubo ABS 2,0x1,0x1000 mm
2 x Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
2 x Tubo ABS 4,0x2,0x1000 mm
2 x Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x Tubo ABS 9,0x7,0x1000 mm
1 x Tubo ABS 5,0x4,0x156 mm
1 x Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x Tubo ABS 10,0x8,0x1000 mm
1 x Tubo ABS 3,0x2,0x1000 mm
1 x Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x Tubo ABS 18,0x16,0x1000 mm
1 x Tren aterrizaje Electrico ULTIMATUM 3.0 (Electro
1 x SAVAGE Max Red 1080 mm
1 x Vela OXY 0,5 pulgadas2
1 x Motor SAITO FG-120 TSS Boxer 4T
1 x Servo KST BLS905X HV V2.0 8Kg 20mm
1 x Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x Tubo ABS 16,0x14,0x1000 mm
1 x Tubo ABS 3,0x1,0x1000 mm
31,691.47EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas