2 x | Circlick securite |
2 x | CC 05 |
2 x | 30 cm BEC cable (male) |
2 x | DPS Switch JR/JR |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Connector CAN 15 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Cabling for Fox MDM1 wings |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | UBEC 6A KAVAN |
1 x | 5 LiPo XH>EH adapter |
2 x | 2 LiPo XH>EH adapter |
1 x | BEC 3A FOXY |
1 x | Connector Sub-D 2+5 Female |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | CC 03 |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | CM-3 |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | TrainerCord (master-learner) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Glases Nimbus "Black" |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | 3 LiPo XH>EH adapter |
1 x | Glases Ace |
1 x | USB interface ALTIS |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PSC 5 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 30 cm BEC cable (female) |
1 x | 4 LiPo XH>EH adapter |
1 x | Female connector for 6 pines AWG |
1 x | Glases Aspen |
1 x | Male Prolonger TP 4/5S |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Male connector for 6 pines AWG |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | 800TVL CMOS camera for FPV |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | One touch canopy lock |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | SUS wire 3m (nylon coated) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Covered closure or fairings |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | CC 01 |
1 x | Glases Flitemaster |
1 x | Glases Nimbus |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Glases Stratus |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Glases Moritz |
1 x | EWC3 100 cm wing connector |
1 x | DPSI RV Mini 5 (2008) |
1 x | Baseplate servo |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Telemetria XYCOY adapter |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | Heat sink for Optotronix LEDs |
2 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | DPSI Micro - RCS |
1 x | DPSI LR-S (with push buttons) |
1 x | Pushrod greyline 3/2 with coupler M2 |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | Connectors MPX female |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Magnetic Connect locking system |
1 x | EWC3 40 cm wing connector |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | EWC6 40 cm wing connector |
1 x | DPSI RV Mini 5 Magic |
1 x | RX external cable for estandar receivers |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Turbina XICOY X95 compact |
1 x | Turbina X45 H "compact" |
1 x | Turbina X132 H "Light Version" |
1 x | Turbina XICOY X180 light |
1 x | Turbina X45 H "Light Version" |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Rudder 107-06 |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Kardan Black (without pinions) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Telemetry interface ALTIS 12 cm |
|
15,659.69EUR |