| 2 x | 800TVL CMOS camera for FPV |
| 3 x | USB Mini Camera endoscope |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 3 x | Round Rod 3,0x1000 mm |
| 2 x | Round Rod 2,0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Glases Flitemaster |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 3 x | 30 cm BEC cable (female) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 2 x | CC 03 |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 2 x | 4 LiPo XH>EH adapter |
| 2 x | 5 LiPo XH>EH adapter |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | 2 LiPo XH>EH adapter |
| 1 x | Cable Cargador FUTABA |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | EasyFLY Addon |
| 2 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 3 x | Slave-cable USB Easy Sim |
| 2 x | GameCommander USB Universal |
| 1 x | Angle of incidence meter |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | FX three-position switched channel, long |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | Interface Realflight Simulator |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CM-3 |
| 1 x | BEC 3A FOXY |
| 1 x | Male connector for 12 pines AWG |
| 2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | EXTRA 330SC-E 95" Orange/Blue/White |
| 1 x | EXTRA 300 78" V3 Yellow/Red/Blue |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | Charger 220/110v |
| 1 x | 15 cm PTFE-tubing for 25 mm tubes |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | Servo DITEX EL0510M |
| 1 x | 27x10 prop Super Silence |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
| 1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | SBEC Jeti |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Connector CAN 15 |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Hardener P-25, canister 2.5Kg |
| 1 x | MEKP Harderner 100 g |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | |
| 1 x | 24x14 prop Super Silence |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 3-blades 27x12 carbon prop Super Silence |
| 1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | 30x14 prop Super Silence |
| 1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | |
| 1 x | 500 ccm complete gasoline fuel tank |
| 1 x | 3-blades 29x12 carbon prop Super Silence |
| 1 x | Servo DITEX TD2612S |
| 1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 1 x | Servo KST A08H V6.0 3,2Kg HV |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | CC 02 |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
 |
| 8,841.24EUR |
