Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 21x14 3Bl Pusher (Tripala)
89.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Servo NARO Max Std
1 x	Cristal Universal RX 35.030 Ch 63
2 x	Cristal de Receptor 35 Mc/s Ch 62
2 x	EasyFLY Addon
2 x	SERVO DES 588 BB MG
1 x	Morro metálico PROJETI
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Cristal TX 35.180 Ch 78
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Capuchón L interruptor aluminio rojo
1 x	Cable silicona 0,25 mm2 blanco (150 m)
1 x	Maleta transporte FUTABA 10PX
2 x	Capuchón M interruptor aluminio rojo
2 x	Conjunto bieleta 100 mm para dirección
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Caja servo FUTABA S9650/9670SV
1 x	Prisionero allen M3x3
1 x	Emisora MZ-18, 9 Ch HoTT
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
2 x	Maleta FUTABA Aluminio
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
2 x	Capuchón decorativo interruptores TX cortos
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Espuma caja emisora FUTABA longe case
1 x	Cable servo PVC 0,14 mm2 FUTABA (5 m)
1 x	Conjunto bieleta 45 mm para dirección
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Emisora MZ-10, 5 Ch HoTT
1 x	Anemometro Xplorer4
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Futaba FX36 2.4GHz FASST Test + R7008SB
2 x	Conjunto bieleta 140 mm para dirección
3 x	Cierre cabina
2 x	Bateria FUTABA 18MZ
2 x	Cable servo 5 lineas negro (1m)
2 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x	Cable servos silicona 0,50 mm2 Futaba (100 m)
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Varilla ABS 2,5x1000 mm
2 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	GPS, Vario y Sensor de altitud SBS-01G
1 x	Varilla ABS 1,25x1000 mm
1 x	Prolong/Adap correa Futaba V
2 x	Cable servo PREMIUM 100m (blanco/rojo/azul)
1 x	Prolong/Adap correa Futaba T-10CG
1 x	Varilla ABS 1,5x1000 mm
1 x	Clips para fijar Ala (2 pcs)
2 x	Cable simulador USB multiplayer
2 x	Salida para cables 38x4,5 mm (2 pcs)
2 x	DINAMOETRO S-1580
1 x	Antena FUTABA R7108/7014/7114SB (1 pc)
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Emisora HORUS X10S Carbone Fiber
1 x	Capuchón L interruptor aluminio azul
1 x	Tubo ABS 7,0x6,0x1000 mm
1 x	Pasacable de goma Ø 5 mm (4 uds)
1 x	Prisionero aluminio 5 mm Ø (4 uds)
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Cable servos silicona 0,25 mm2 Graupner (100 m)
2 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS I 10x5x1000 mm
2 x	Varilla acero Ø 4,0 mm x 1000 mm
2 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
2 x	Correa emisora FUTABA
1 x	Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs.
1 x	Pasacable de goma Ø 6.4 mm (4 uds)
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	Liston ABS 2.0x8.0x1000 mm
2 x	Tubo ABS 6,0x5,0x1000 mm
2 x	Varilla ABS 6,0x1000 mm
1 x	Emisora TARANIS X9D Plus + Rx X8R + Bat 2000 mAh + maletin
1 x	Soporte Guia Antena doble
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Receiver FrSKY Archer R8pro 2,4 Ghz
1 x	Caja servo BLS-152 / 172
1 x	Anemometro Xplorer1
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Antena FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
2 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Cable profesor/alumno FrSKY
1 x	Emisora MZ-12, 6 Ch HoTT
1 x	GameCommander USB Universal
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS)
1 x	Soporte aluminio para encendido (azul)
2 x	Tubo Tygon 7.94 x 4.76 mm 1 m
1 x	Adaptador para motor A50-V3
1 x	Soporte INTAIRCO iTrap 175 ml
1 x	Tubo de silicona 1m (diam.int. 2.5 mm)
1 x	Deposito DUBRO 1800cc-60oz
1 x	Abrazadera para escape de 50 mm
1 x	Escape Pitts en kit para CAP 21
1 x	Helice FIALA 23x8 Electric
1 x	Unidad EVP para AXI2208/xx y 2212/xx
1 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Cristal de Emisora 35 Mc/s Ch 77
1 x	Brazo servo 25 mm Futaba con rótula
1 x	Brazo servo doble pull-pull 50/60 mm Futaba con rótulas
1 x	Base de soporte montaje servos Std. apaisado
1 x	Brazo servo 52 mm Futaba
1 x	Brazo servo Futaba tandem 46 mm con rótula
1 x	Cristal Universal RX 35.070 Ch 67
1 x	Cristal RX 35.120 Ch 72
1 x	Interface Jack Adapter IKARUS
1 x	Cristal Universal TX 35.140 Ch 74
1 x	Morro OPTIMA 2.200 mm (Elec ó Planeador)
1 x	TMM 1210-3S heli
1 x	Muñeco Operario 1:32
2 x	Cargador LiPo Charger4
1 x	Sistema de paso variable 3D Indoor
1 x	Pinza de cierre tubo 6 mm
1 x	Antena RX 85 mm HoTT
1 x	Emisora GRAUPNER MZ-24 Pro
1 x	Acoplador 5 - 5 mm
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Tren retráctil neumático tripata (Jet Legend)
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Adaptador JST-XH
1 x	Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Funda anticalorica de fibra de vidrio Ø 4 mm 1000 mm
1 x	Cargador FUTABA SQN30W12P-08 220v
2 x	Funda Protectora cables Ø 10 mm 1000 mm
1 x	Receptor Futaba R3006SB T-FHSS 2.4GHz
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Soporte bateria LiPo V2 S (negro)
1 x	Varilla acero roscada M2 - 1m
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Protector punta ala 40x14 (2 pcs)
1 x	Stick emisora V4/M3 Azul/Plata Duraluminio Futaba/Hitec/Spekt.
1 x	Cable acero trenzado Ø 1,3 mm (10 m)
1 x	Tubo carbono (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Desdoblador de mando 2mm (2 pcs)
1 x	Tubo carbono (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Deposito SECRAFT V2 1000 ml Gas
1 x	Deposito DUBRO 3000cc-100oz
1 x	Tapon deposito 22 mm (Espiga doble integrada)
1 x	Helice carbono 9x4.7 * 22x12
1 x	Tarjeta programadora KAVAN PRO
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	Brazo servo redondo 30 mm Futaba
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Brazo servo 17 mm con rótula FUTABA
1 x	Adaptador para rotula/Quick Link M3x20 Ø 5 mm (4 pcs)
1 x	Prolong. XH / XH 30 cm para 3 elem. cables silicona 0,25 mm2
1 x	Prolong. Macho XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x	Soporte para cables L 10 mm (6 pcs)
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Extension MPX-MPX 20 cm
1 x	Conexion PREMIUM fuselaje/alas para dos servos MPX 120/40 cm
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Funda Protectora cables abierta Ø 13 mm 1000 mm
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Cierre cabina 33/23.5mm (2 uds)
1 x	Funda Protectora espiral negra cables Ø 0,5/50 mm - 25 m
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Stick emisora V1/M3 Plata Duraluminio Futaba/Hitec/Spektrum
1 x	Tubo carbono 3K-PW (Ø16 mm, Ø14 mm L:1000 mm)
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Prisionero 3 mm Ø (4 uds)
1 x	Prisionero 2 mm Ø (4 uds)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Tubo ABS 3,0x2,0x330 mm
1 x	Pin M1 (10 uds)
1 x	Tubo acero (L 1000 mm, Ø10 mm, Ø9,7 mm)
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:2000 mm)
1 x	Protector punta ala 30x10 (2 pcs)
1 x	Conector banana oro 4 mm
1 x	Cierre/Anclaje Ala M3 Azul (2 pcs)
1 x	Tubo carbono (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Frenos Cuchillo 250 mm / 16 mm
1 x	Cierre/Anclaje Ala M3 Rojo (2 pcs)
1 x	Pasacable de goma 9.5 mm (4 uds)
1 x	Stick emisora V3/M3 Azul duraluminio Futaba/Hitec/Spektrum
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Prolongador Cable S-Bus
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tapon rebosadero negro
1 x	Depósito de gasolina de 550 cc completo
1 x	Depósito de gasolina de 1000 cc completo
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x	Tapon rebosadero negro
1 x	Depósito de gasolina de 750 ccm completo extra fuerte
2 x	Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Extensión escape motor OS 120 AX
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Escape Pitts D.A. 70

9,851.81EUR