Top » Catalog » Hardware » Undercarriage » Accesorios » HQHQS6

25.00EUR

Tap FESTO 6-6 mm
[HQHQS6]

- Tap FESTO 6-6 mm
- Two connectors for simple assembly and orderly routing of hoses.
- To connect hoses of the same diameter.
- For distribution of compressed air or kerosene lines.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Refueling kit for Cap "Red" temporarily out of stock	Tap FESTO 4-4 mm temporarily out of stock	Soporte grifo FESTO (2 pcs) temporarily out of stock
Cyano INSTA - CURE™ (12g) temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock	Festo 6mm Tubing Holder (10 uds) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
    Accesorios
    Actuator electric
    Brake set
    Electric retracts->
    FEMA Landing gear
    Floats
    Mechanical retracts
    Retractil gear neumatic
    Skys
    Struts
    Tail Landing Gear
    Wheel pants
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Spikes Band (5 m)
4 x	Tape GFK 25 mm
5 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	Cinta Goldfix 1m
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	Marker ties (20 pcs)
3 x	SE Ring 200 mm (2 pcs)
3 x	SE Ring 450 mm (2 pcs)
4 x	14x60 mm Mini rings Tie Wraps (4 pcs)
3 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
4 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
4 x	SE Ring 250 mm (2 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Motor A2212/13T
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	SE Ring 300 mm (2 pcs)
5 x	Ring 320 mm length (5 pcs)
3 x	SE Ring 240 mm (2 pcs)
2 x	20x1000 mm Ring Strap Back To Back
2 x	Tape GFK 50 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	SE Ring 330 mm (4 pcs)
2 x	SE Ring 350 mm (2 pcs)
4 x	SE Ring 360 mm (2 pcs)
2 x	Tape GFK 38 mm
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Cable with accesories
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	20 mm carbon horn
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn for flap control (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Glases Aspen
1 x	Glases Flitemaster
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x
2 x	Foil for sticking flaps and ailerons
3 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Propeller balancer
1 x	Ferrita 27x14x7 mm
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Ball Link Plier
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Insulator block ZG 38/S/SC
1 x	One Way bearing for EME55 starkit with key
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Motor NGH GF30
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x	Low speed needle DA-50R/100I
2 x	Motor EME 35 cc with electric starter
1 x	Motor EME 70 cc with autostarter
2 x	Piston ring for DA-50R and DA-100
1 x	L ELBOW 90º ø 25 mm
1 x	90° TUBE-ANGLE Ø 25 mm
1 x	Valvoline SynPower 2T, 1 Litre
2 x	Canister combo DLE 111 cc
1 x	Rear bearing for motor 35/40 cc
1 x	Escape Moki 100 BVT
1 x	Hub propeller DLE 111 V3/120
1 x	Stainless Steel Bend D 25x0,5mm
1 x	Silencer with rear exhaust DA-120
1 x	Actuador lineal HLS12-100210-7.4v
2 x	6 mm M3 variable inclined horn
1 x	Micro control horn T2 Ø 1
1 x	Horn mando small (2 pcs)
1 x	5 mm M2 variable inclined horn
1 x	Long horn 50x26
2 x	Rudder forward 80x28 "type Kato"
1 x	6 mm red aluminium threaded horn with patella
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Control horn long w/ball
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
2 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn DUBRO 1/2A
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Long adjustable control horn 3x34
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Foam plastic plates (310x210x2 mm)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Fiberglass plate 620x540x2,0 mm
2 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
2 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Foam plastic plates (310x210x5 mm)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Carbon plate 700x550x0.5 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Glases Nimbus
1 x	Release film 100 cm x 50 m
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Glases Nimbus "Black"
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Field folding model stand
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Tray for FUTABA 18 SZ
1 x	White aluminium 230 mm landing gear
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Canister combo DLE 55 cc
1 x	‎Reed valve for DA-60/70
1 x	Prop hub screw DA85/100/120 & VM170/200/210
1 x	Steel conrod DA-50R and DA-60
1 x	Rear crankcase DA-50R
1 x	Reed valve petal for DA 35/50R/100l carburator
1 x	Stainless Steel Muffler D.A. 35-70
1 x	Pitts Mufflers EME 70 cc (2 pcs)
1 x	Motor EME 35 cc
1 x	Piñon motor autostarter 35cc
1 x	Prop washer DA-50R/60/70
1 x	Motor DLE 65 cc
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Metalic joint for DA-85/DA170 cilinder/elbow
1 x	Carburetor menbrane for ZG 20/22/23/26/31 motor
1 x	Motor Moki 100 BVT
1 x	Propeller diller for DLE111 and DA85-150
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	58 mm micro servo cover
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Albatros ,spare cockpit (Top Model)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Z Bender - S Type Tool
1 x	Avia (Top Model)
1 x	Vacuum pump P1-N
1 x	Tray for FUTABA 14SG/16SZ
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Vacuum pump 12 CFM
1 x	Two-function control switch + button by FUTABA
1 x	Tren de cola carbono 50-70cc
1 x	Bidule 170 ARF 3.48 m
1 x	XT-60 Plug Mold
1 x	Motor DLE 111 cc
1 x	Motor DLE 61 cc
1 x	Short reed valve petal for DA 100-R carburator
1 x	Motor DLE 130 cc
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Stainless steel silencer for DA 85/170
1 x	Motor DLE 55 cc
1 x	Prop screw for DA50/60/70, VN60/70, M5x45
1 x	Reed valve carrier, without reed valves DA-150L/170
1 x	One Way bearing for EME35 starkit with key
1 x	Piston EME 35cc
1 x	Pitts Mufflers EME 35 cc
1 x	Motor DLE 55 RA
1 x	Propeller plate for DA-120 / DA-170 / DA-150 New Version
1 x	Motor DLE 35 RA
1 x	Piston pin for DA50R/DA100
1 x	Motor EME 60 cc with electric starter
1 x	Reed valves with doubler, set for DA 85/100/120
1 x	Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x	Prop washer for DA-85, DA-100, DA-100L, DA-120
1 x	Woodruff key for DA50/85/100/150 and DA 200
1 x	Motor EME 60 cc
1 x	Pick up DA50/100/150
1 x	Motor DLE 60 cc Twin
1 x	Selfstarr EME35
1 x	Cylinder EME 35 cc
1 x	Pitts Mufflers EME 55/60 cc
1 x	Reed valve cage with petals for DA 100/150
1 x	Piston for DA-60 DA-120
1 x	Motor DLE 30 cc V2
1 x	Piston DA-85/170
1 x	Motor NGH GF 150 R5
1 x	Stainless steel silencer for DA 150/150L

26,162.37EUR