1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x SUS wire 3m (nylon coated)
1 x Locking cable tie 3.2x142 (uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Covered closure or fairings
1 x Locking cable tie 2.5x100 (uds)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Steering arm 16 mm Ø 3 mm
1 x Steering arm 12 mm Ø 4 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Cockpit plastic closing
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Cap closure 33/23.5mm (2 uds)
2 x Canopy Latch
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (2 m)
2 x Optical RPM Sensor
1 x Conector JAPAN G2 Set 5 pares
1 x Adjustable brass horn threaded M3
1 x Spinner fixed propeller 42 mm / 5,0 mm
2 x Propeller hub spacer 8/5.5
1 x Beech dowels 2.0 x 1000 mm
1 x POLARON EX 800w charger
1 x MZ-12, 6 Channel HoTT
1 x Propeller Pleg CAM-Prop 8x6
2 x Transmitter Crystal 35 Mc/s Ch 77
2 x Foam plastic plates (310x210x2 mm)
1 x Manometer 4 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Coupling bush 5 - 5 mm
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Mini Infrared Thermomiter
1 x Flap hinge 33x9 mm (6 pcs)
1 x Spikes Band (5 m)
1 x Beech dowels 4.0 x 1000 mm
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Silicone red 0,25 mm² wire (25 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x 100m servo "Premium" wire (white/red/blue)
1 x 10m servo "Premium" wire (white/red/blue)
1 x Paramotor BackPack XXS (without accessories)
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Paramotor Trike XL
2 x Prolongador S-Bus JR/JR 10cm
1 x Premium servo extension 50cm
1 x Parachute PV6 for F3J
3 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension 30 cm (Futaba)
2 x Extension silicon 30 cm male (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 100 cm (Graupner)
2 x Futaba Female 40 cm extension
1 x Futaba male 40 cm extension
2 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x MAX pilot ARTF
1 x Cable S.BUS 3 salidas 300 mm
1 x Cabel "Y" 30 cm (graupner)
2 x Extension silicon 35 cm male (Futaba)
1 x Parachute BACKUP X100
1 x Cabel "Y" 30 cm (Futaba)
2 x Futaba Female 40 cm extension
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 100 cm (Futaba)
1 x Extension lead 15 cm Multiplex
1 x Aramid 50 daN 50 m
1 x Wing OXY 5,0 m2
1 x Premium servo extension 100cm
1 x Extension silicon 30 cm female (Graupner)
2 x Circlick securite
2 x Rescue 1,8m2 / BackPack
1 x Para-RC Trike "RC-Bullix"
2 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension 90 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
2 x Premium servo extension 75cm
1 x Parachute P4
1 x ABS angle 2,0x2,0x1000 mm
1 x Oratex Antik 2m
1 x Lock washer 4.3 mm (20 pcs)
1 x Jeti Advance Plus Program Card
1 x DYMOND VTX UBS Programming adapter
1 x Mini VISION "spread tow" CFK
1 x Glider Ka 7 Red (2540mm)
1 x Fournier RF-4D
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Servo holder for retract
2 x Quick hose connector 6-4 mm
3 x 65 mm mini servo cover
1 x Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
2 x LO 100 ARC 3.3m,cabina
1 x Receiver replacement antenna, approx. 85
1 x DG-303 ACRO 3750 mm, canopy
1 x Fox 4000 mm Airworld,canopy frame
1 x Servo JETI DSHV 3D13T (13 Kg)
2 x Fox 4000 mm (Airwold)
1 x SERVO DES 588 BB MG
2 x 58 mm micro servo cover
1 x Elevator VENTUS 2cx 4.5m
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Servo TOPMODEL S7520 MG
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x 11 mm wing servo holder
1 x ASH 31 6.08m Composite Hollow Molded
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Fox 4000 mm Airworld,cabina
1 x 90x75 mm standart servo cover
1 x Fox MDM 1 4000 mm DeLuxe,cabina
1 x 50x45 mm micro-mini servo cover
1 x Fox MDM 1 4000 mm Std.
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x LO 100 ARC 3.3m,frame canopy
1 x Receptor GRAUPNER GR-24 HoTT
1 x Propeller POWER-PROP 7x7
3 x Partall paste 650 g
2 x Universal Colour Paste white 50 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x 200 mm extensión servo HITEC/JR
1 x 80x40 mm hard foam KOVO wheel
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x Premium servo extension 25cm
2 x Extension silicon 10 cm (Graupner)
1 x Spray Graphit 33
1 x Spannlack 1000 ml
2 x Spray adhesive INFUTAC (Clear) 500 ml
3 x Universal Colour Paste deep black 50 g
1 x PROFI Box JETI
1 x Kontronik ProgUnit
1 x LOWER TOW HOOK
1 x 50 mm white plastic spinner for fixed propeller
1 x Spinner plastic white fixed propeller 42 mm
1 x 45 mm black plastic spinner for fixed propeller
1 x 40 mm white plastic spinner for fixed propeller
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x SERVO DES 806 Pignons
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Servo TOPMODEL STANDARD S3217
1 x Fox MDM 1 6000 mm
2 x Hobbylite Filler, Balsa colour
2 x Solvent Plasti Dip 1000 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x Presto SF Light Filler styrene-free (420 g)
1 x Propeller MEJLIK 27x12 TH
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Distanzstück motor OS 120 AX
1 x Propeller G-Sonic 20x8
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x SERVO DES 658 BB MG
1 x Propeller APC 11x3.8 SF
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x PT 16x10 E Propeller
1 x Servo TOPMODEL DS9010 T
1 x ASK 21 6.8m
1 x Propeller APC 11x8.5 Electric
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x ASW 15 5000 mm (Airwold)
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 14x10 Electric
1 x Fox 4000 mm with flaps (Airwold)
1 x Servo TOPMODEL DS1413 T
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x 
1 x Plasti Dip Liquid Tape 429 ml black
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x 1000 ml sealer (DOPE)
1 x Hexagonal ball head 2.0 x 50 mm
1 x 500 ml sealer (DOPE)
1 x Spray EC Red 400ml
1 x Painting GHT Lexan Black 150 ml
1 x Carbon blade 230 mm
1 x Propeller MEJLIK 24x10 TH
1 x Propeller MEJLIK 22x10
1 x Propeller MEJLIK 28x10
1 x Propeller MEJLIK 28.5x12 S-3 Blades
1 x Propeller MEJLIK 20x13 N-3 Blades
1 x Propeller MEJLIK 18x8 CFK
1 x Propeller MEJLIK 30x12
1 x Propeller MEJLIK 32x12 EVO
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Wheel collar 2 mm Ø (4 uds)
1 x Extension silicon 25 cm (Graupner)
1 x Extension silicon 75 cm (Graupner)
1 x TellMe JETI
1 x Paint gun for sprays
1 x Actrocon 30A ESC
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Regulador Hobbywing Platinum PRO 130A-HV V4
1 x Actrocon 60A ESC
28,509.63EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies