Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Turbina XICOY X195 compact
2,959.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Arandela M3 negra (4 pcs)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Arandela 2.7 mm (20 pcs)
2 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Arandela 3.2 mm (20 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Circlick para eje 1.9 mm (10 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Arandela de bloqueo 1.5 mm (10 pcs)
1 x	Arandela dentada 4.3 mm (20 pcs)
2 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Arandela dentada 2.2 mm (20 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela de goma M3-M4 (8 pcs)
2 x	Pegatinas números para marcar
1 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
2 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 170 M - Paramotores
1 x	Helice FALCON 32,5x11 PUSHER Carbono
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
3 x	Bisagra papel lite CA (12 uds)
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
2 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
2 x	Bisagra de Flaps 33x9 mm (6 uds)
2 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
2 x	Bisagra larga con pin metalico (12 uds)
2 x	Bisagra de compuerta/Flaps
2 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
3 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
2 x	Bisagra larga con pin metalico (6 uds)
2 x	Bisagra de nylon 20x20x0,3 (10 pcs)
2 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra 18 mm reforzada
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
3 x	Bisagra de compuerta 30x16 mm (2 pcs)
2 x	Bisagra papel CA (12 uds)
3 x	Bisagra 25 mm reforzada
3 x	Bisagra correa de latón en miniatura 1m
2 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
2 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Listón de PINO 3,0x7,0x1000 mm
2 x	Listón de NOGAL 2,0x2,0x1000 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Liston de BALSA 8,0x8,0x1000 mm
3 x	Listón de TILO 3,0x3,0x1000 mm
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
2 x	Listón de PINO 2,0x2,0x1000 mm
2 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Listón de PINO 3,0x5,0x1000 mm
1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
2 x	Listón de NOGAL 1,5x1,5x1000 mm
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector Servo hembra 4 pines
1 x	Conector banana oro 4 mm antichispa
3 x	Conector equilibrado XH (3S) macho (2 pcs)
1 x	Conector banana oro 5,5 mm antichispa
2 x	Conector equilibrado XH (2S) macho (2 pcs)
1 x	Conector DEANS hembra 30 cm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector CAN 15
1 x	Conector DEANS 4 pines (1 par)
1 x	Adaptador Sub-d conector MPX
1 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Conector banana oro 2 mm (Ultralight)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Conector BEC macho (10 pcs)
1 x	Conector banana oro 4 mm (Ultralight)
2 x	Conector equilibrado XH (5S) macho (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Cierre de plástico para cabinas
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Paracaidas BACKUP X100
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	Cartuchos de humo AX-3 blanco (10 pcs)
1 x	Tapaporos 500 ml (DOPE)
1 x	Adaptador 5 LiPos XH>EH
1 x	Tornillo allen M3x12 (10 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Tuerca para insertar M5 (10 pcs)
1 x	Tornillo allen M2.5x5 (10 pcs)
1 x	Tuerca para insertar M6 (10 pcs)
1 x	Cable servos PVC 0,25 mm2 Graupner (5 m)
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Tornillo allen M2x8
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Conector equilibrado XH (7S) macho (2 pcs)
1 x	Microbalones (0,12 g) 350 ml
1 x	Microbalones 120g (0.19g/cm3 - Aprox 1L)
1 x	Polvo de algodon 7 Kg
2 x	Resina Epoxy L-385 (625 g)
1 x	Varilla acero roscada M2 - 1m
1 x	Guardabarros ruedas 112/127 mm
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
1 x	Gelcoat blanco 1 Kg
1 x	Resina Epoxy L (2.5 Kg)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Thixotropic agente tin/15g (aprox. 350 ml)
1 x	Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
2 x	Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
2 x	Resina P+acelerador (EPH161-P)kit 585g [500g res+85g ace]
2 x	Bisagra pequeña con pin metalico (12 uds)
2 x	Bisagra pin 26x11 mm (10 uds)
1 x	Bisagra pin 34x16 mm (10 uds)
2 x	Bisagra PIN mediana (12 uds)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Corona grade autoarranque DLE-170M
3 x	Set bisagras indoor con horns integrados
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra pin 39x20 mm (10 uds)
4 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
2 x	Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Plancha contrachapado "Economy" 600x300x6,0 mm
1 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Prolongador LiPos XH>XH
1 x	Conexión alas 2 servos JR/Graupner 50 cm
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector XT-90 (pareja)
1 x	Conector equilibrado XH (7S) hembra (2 pcs)
1 x	Conector equilibrado XH (6S) macho (2 pcs)
2 x	Conector equilibrado XH (9S) hembra (2 pcs)
1 x	Guías externas para antena de 2,4 GHz blancas (2 pcs)
1 x	Guías externas para antena de 2,4 GHz negras (2 pcs)
1 x	Hélice POWER-PROP 7x7
1 x	Cierre para cable de acero diam. 1,0 (10 pcs)
1 x	Horn de mando 5/20 con rótula M2
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	SLICK 360-A 104" (2640 mm)
1 x	SkyMaxx 1.550 mm (kit)
1 x	Circlick seguridad
1 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Conector MPX negro hembra
1 x	Conector XT-30 (hembra)
1 x	PVC termo-retráctil batería 45 mm negro transparente (1 m)
1 x	Conector XT-30 (pareja)
1 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
1 x	Conector Sub-D 2+5 Macho
1 x	Conector equilibrado XH (8S) macho (2 pcs)
1 x	Ferrita 14x8x5.5 mm
1 x	Conector JR Servo macho (10 pcs)
1 x	Conector MPX 8 pins con base (negro) 1 par (macho-hembra)
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Soporte rojo para conectores de 3,5 mm
2 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	PIN Conector hembra (100 pcs)
1 x	Soporte conector MPX macho (6 pcs)
1 x	Soporte rojo para conectores de 4 mm
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	MB-339 Aermachi 84" ARF c/retractil electric
2 x	Resina Epoxy L-385 (5000 g)
1 x	Programador RS-200
1 x	Resina Epoxy L-385 con catalizador H385 (3.5 kg total)
1 x	Capuchón L interruptor aluminio rojo
1 x	Capuchón decorativo interruptores TX
1 x	Bisagra 15 mm reforzada
2 x	Bisagra Pequeña flexible (12 uds)
1 x	Bisagra Robart flaps/compuertas metal (2 pcs)
1 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Conectores Kontronik (10 conectores, 5 pares)
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Actuador electrico 25 mm HIGH TORQUE
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Resina Epoxy L-385 (1250 g)
1 x	Aro metalico delantero FEMA
1 x	Hardener P-25, canister 2.5Kg
1 x	Controlador frenos electricos
1 x	ER-40eVo Set B [Complet set + GS200]
1 x	Correa V2 doble
1 x	Maleta aluminio MULTIPLEX MLink
1 x	Filtro glow
1 x	Placa de montaje Ø 28 mm para motores eléctricos
1 x	BU 131 Jugmann Panel Instrum. frontal
1 x	BU 131 Jugmann ARC
1 x	Corona pequeña autoarranque DLE-170M
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Motor A2212/13T
1 x	Plancha contrachapado Abedul 600x300x2,5 mm
1 x	Cristal Universal RX 35.050 Ch 65
1 x	Cristal Universal RX 35.090 Ch 69
1 x	Cristal Universal RX 35.150 Ch 75
1 x	Servo MKS HBL599 SL
1 x	Termo-retráctil verde tubo de 6,4x1000 mm 2:1
1 x	Termo-retráctil verde tubo de 2,4x1000 mm 2:1
1 x	PIT (Aero-Naut)
1 x	Termo-retráctil azul tubo de 6,4x1000 mm 2:1
1 x	Cristal TX 35.050 Ch 65
1 x	Tester servo Profesional
1 x	Cristal TX 35.180 Ch 78
1 x	Nut hélice Largo 2.25" (5.7 cm)
1 x	Cono 76 mm aluminio
1 x	Cono 50 mm aluminio (Kavan)
1 x	Plancha contrachapado ABEDUL 600 x 300 x 2,0 mm
1 x	Servo RHINO pro SHV digi 4
1 x	Cristal Universal RX 35.120 Ch 72
1 x	Servo DITEX TD2612S
1 x	Adaptador 4 LiPos XH>EH
1 x	TWIST planeador gomas
1 x	PVC termo-retráctil batería 165 mm transparente (10 m)
1 x	Cable BEC 30 cm (macho)
1 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Inversor de servo
1 x	Inversor de servo
1 x	Cristal de Receptor 35 Mc/s Ch 62
1 x	Conector banana oro 2 mm

16,065.87EUR