1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Opale Rucksack
2 x Parachute PV6 for F3J
3 x LUCAS pilot ARTF
1 x Para-RC Trike "RC-Bullix"
1 x Ballast 700gr OPALE
2 x Paramotor BackPack XXS (without accessories)
1 x Parachute P4
1 x Paramotor Trike XL
1 x Trike XL motor set (motor+esc+prop)
3 x Wing OXY 0,5 pulgadas2
1 x Windsock Ozone L - 700 mm
1 x Wing OXY 5,0 m2
2 x Paramotor BackPack XXS 2
2 x MAX pilot ARTF
2 x Windsock Ozone L -1200 mm
1 x Motor A2212/13T
2 x Set cintas unión paracaídas 145 cm
1 x Ciano KAVAN Medium 20g
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
2 x Indoor hinge with servo arm integraded
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
3 x Flap hinge 33x9 mm (6 pcs)
2 x Gates hinge black 30x16 mm (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Rescue 1,8m2 / BackPack
1 x Para-RC Mix
1 x Parachute BACKUP X100
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
3 x Fast'n EZ-CA-Hinge (12 uds)
3 x Nylon hinge 15x0,3 (10 pcs)
1 x Flap hinge (6 pcs)
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x Pin hinge 26x11 mm (10 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x 25 mm reinforced hinge
1 x Nylon hinge for flaps 33x9 (2 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
3 x Nylon hinge 20x15x0,3 (10 pcs)
2 x 15 mm reinforced hinge
1 x Pin hinge 34x16 mm (10 uds)
2 x Miniature brass strap hinge, 1 m
2 x Pin hinge 39x20 mm (10 uds)
1 x Large flex hinge (12 uds)
2 x Nylon hinge 20x20x0,3 (10 pcs)
2 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 18 mm reinforced hinge
2 x Micro flex hinge (12 uds)
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x 28x12 BIELA 3Bl Pusher propeller
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x Slave-cable USB Easy Sim
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Glass Bubbles (0,12 g) 350 ml
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x Epoxy 5min KAVAN 2x 100g
1 x LA500 Autogyro
1 x 25x14 4Bl Scale
1 x 28x10 BIELA propeller
1 x 19x10 BIELA propeller (3-blades)
1 x 25x10 BIELA propeller (3-blades) Corsair Scale
1 x 22x10 BIELA propeller
1 x 17x10 BIELA propeller (3-blades)
1 x 3-blades 20x12 carbon prop Super Silence
1 x 24x14 prop Super Silence
1 x 24x12 BIELA 3Bl propeller (3-blades)
1 x 21x12D BIELA propeller (3-blades)
1 x EDGE 540-A 74" (1880 mm)
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x ULTRA STICK 10 cc ARF
2 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x Tail wheel for 8-12 kg models
1 x Tailwheel for F3A size
1 x Tren de cola carbono 50-70cc
1 x Gates hinge
2 x Long pinned hinge (12 uds)
1 x LASER 73" 1.85m (05) PILOT
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x EDGE 540 1.73m SEAGULL Model
1 x Small pinned hinge (6 uds)
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Medium pin type hinge (12 uds)
1 x Robart Door Hinge (Pk2)
1 x Tailwheel for 1-3 kg models
19,715.91EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies