Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1RDB

4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]


BULL MØ1 2.600mm \"RED BULL\"
BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Bateria LiPo GRE24 600 mAh 3.7v
Bateria LiPo GRE24 600 mAh 3.7v
12.25EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Round Rod 4,0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Servo NARO Max Std
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Electric spoiler 250 mm (2 pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Flat washer 4.3 mm (20 pcs)
1 x Hardener Aero EPH 161 (250 g)
1 x Release wax 250ml
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Piloto jet 130 mm
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Motor mount EDGE 540 48"
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Motor mount VANQUIST 48" F3A
1 x Epoxy 5 min. 500 g (Hardener)
1 x Jeemo Dolly
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Landing gear retract neumatic (Jet Legend)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Bags de Luxe ULTIMATUM 2.0
1 x ABS tube 14.0x10.0x1000 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Solvent Plasti Dip 1000 ml
1 x DYNAMOMETER S-1580
1 x Horn 5/15 with M2 Bearing
1 x Support conector MPX (6 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Slave-cable USB Easy Sim
1 x ULTIMATUM 2.0 m Red Bull
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Locking cable tie 3.2x142 (uds)
1 x Hot Glue Stick GREEN
1 x Plasti Dip Liquid Tape 429 ml black
1 x 1/6 Pilot "Garry"
1 x Crystal Universal RX 35.150 Ch 75
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Connectors banna oro 2 mm (M/F)
1 x Tube Pitot to PIXHAWK
1 x TMM 2512-3S heli
1 x SIMtransmitter 6 Mode 2
1 x Spikes Band (5 m)
1 x Strip ABS 2.0x10.0x1000 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x SE Ring 240 mm (2 pcs)
1 x Round Rod 1,5x1000 mm
1 x Ring 320 mm length (5 pcs)
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Profile ABS Square 1 x 1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Marker ties (20 pcs)
1 x Round Rod 6,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Stickers-digit for marking
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Cross Connector 4.0 mm x 1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Epoxy 5min KAVAN 2x 100g
1 x Program 5v SIO RS 232
1 x Charger LiPo Charger4
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Ball link Aluminio M3 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Angled clevis with threaded rod M3
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Bags de Luxe ASPIRE
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Locking cable tie 2.5x100 (uds)
9,105.78EUR
Manufacturers
Manufacturer Info
Hispano Aviacion
- Other products
Notifications
NotificationsNotify me of updates to BULL MØ1 2.600mm "RED BULL"
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce