1 x | 1/6 Pilot "Garry" |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/6 Pilot "Tony" |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/6 Pilot "John" |
1 x | 1/10 Pilot "Jack" |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | 1/12 Pilot "Langley" |
1 x | Piloto jet 130 mm |
1 x | 1/12 Pilot "Cougar" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | ABS Strip 1.5x3.0x1000 mm |
2 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 2,5x1000 mm |
2 x | SE Ring HACKER 300 mm (2 pcs) |
3 x | SE Ring 400 mm (2 pcs) |
4 x | Tape GFK 38 mm |
1 x | Cinta Goldfix 1m |
2 x | Ring 320 mm length (5 pcs) |
2 x | Spikes Band (5 m) |
3 x | SE Ring 200 mm (2 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
2 x | 20x200 mm battery rings |
2 x | Marker ties (20 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 250 mm (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 330 mm (4 pcs) |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
3 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
3 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
3 x | Beech dowels 2.0 x 1000 mm |
3 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
3 x | Linden wood slat 2.0x2.0x1000 mm |
4 x | BALSA triangular 10x10x1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Oracover White 2 m |
1 x | Motor DLE 200cc Premium Muffler |
1 x | EasyFLY Addon |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Strip 1,5x1,5x330 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | ABS I Strip 10x5x1000 mm |
2 x | 800TVL CMOS camera for FPV |
1 x | Round Rod 6,0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | ProgBOX MASTER Hacker |
2 x | SE Ring 240 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 300 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | |
1 x | Jeti Box mini |
1 x | PROFI Box JETI |
1 x | Vest clothes Hispano Aviación |
1 x | Tape GFK 50 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
3 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | 460 mm EPP Floats |
1 x | Nylon gear block Ø 5 mm (2 uds) |
3 x | BALSA trip 4.0x4.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Hose stopper 4 mm |
2 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
3 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Faucet FESTO |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | EME 55 cc carburetor WALBRO |
1 x | Softshell Hispano Aviación |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | MZ-18, 9 Channel HoTT |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Manometer 4 mm |
1 x | Spark motor OS nº 3 |
1 x | Canopy Latch |
1 x | MZ-12, 6 Channel HoTT |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Hose clips 6 mm |
1 x | Extension Arm for Carburetor (red) |
1 x | Reed valve for DA 50-R |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Pick up DA50/100/150 |
1 x | Adjustable brass horn threaded M3 |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Sparkplug 1/4-32 |
1 x | DLE 111 pipe plug |
1 x | Foreman, scale 1:32 |
1 x | Sparkplug Saito 400 |
1 x | Sparkplug NGK CM6 |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Distanzstück motor OS 120 AX |
1 x | Quick hose connector 3-3 mm |
1 x | Y-Hose connector 4mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Y-Hose connector 4-4-4mm |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | T-Hose connector 6-6-6 mm |
1 x | White aluminium 230 mm landing gear |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Body for landing gear Ø 3 mm |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Quick hose connector 6-6 mm |
1 x | Fail Safe air retract |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Bearing block for noseleg landing gear |
1 x | Landing gear strap small (4 uds) |
1 x | Tap FESTO 4-4 mm |
1 x | 40 mm air cylinder |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Quick hose connector 3-3 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Tap FESTO 6-6 mm |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Air pressure gauge |
1 x | Z-shaped servo mount |
1 x | Quick hose connector 4-4 mm |
1 x | SU 29S 140 carbon landing gear |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Indoor landing gear set |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | T-Hose connector 2-2-2 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | |
|
8,234.24EUR |