1 x | Screw-lock connector M2 (2 uds) |
1 x | Cockpit plastic closing |
1 x | One touch canopy lock |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Canopy Latch |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | RH long aluminium horn (2pcs) |
2 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Small aluminium horn blue (2pcs) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Cable control set |
2 x | Horn 5/15 with M2 Bearing |
1 x | Horn with ball 40x30 |
1 x | PIX Hawk with accesories |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Small aluminium horn red (2pcs) |
1 x | Cable with accesories |
4 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Horn for flap control (1 pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn 5/10 with M2 Bearing |
2 x | Horn 5/20 with M2 Bearing |
2 x | PPM Encoder Module |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | JETImodel SINGLE BEC |
1 x | Cabel charger transmitter GRAUPNER |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
3 x | 30 cm BEC cable (female) |
2 x | CC 01 |
1 x | CC 05 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | CC 02 |
2 x | Adapter lead MPX/XT60 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | 4 LiPo XH>EH adapter |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | MPX-Dean "T" Adapter |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | TrainerCord (master-learner) |
2 x | 3 LiPo XH>EH adapter |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | Vest clothes Hispano Aviación |
1 x | Big Crow DLE-170M |
1 x | Softshell Hispano Aviación |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Extension MPX-MPX 20 cm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Paramotor BackPack XXS (without accessories) |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Rudder forward 70x28 "type Kato" |
2 x | 5 mm M2 variable inclined horn |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | DPSI magnetic switch actuator (housing) |
1 x | 5 LiPo XH>EH adapter |
1 x | Switching module high voltage SXH |
1 x | USB interface ALTIS |
1 x | MAX BEC |
1 x | UBEC 6A KAVAN |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Interruptor SPS 70v 60/120A |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Circlick securite |
1 x | Multi-adapter balancer JST/C - TP |
1 x | CC 03 |
1 x | Male Prolonger TP 4/5S |
1 x | MAX BEC 2 |
2 x | Brass control horn M3 short for wire (2 pcs) |
1 x | SPS Remote switch actuator |
1 x | 30 cm BEC cable (male) |
2 x | Extension 5 lipos JST/C |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Extension 2/3 lipos JST/C |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Extension 5 lipos JST/C - JST |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Xplorer2 anemometro |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Dust collector for mould cleaning |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | XT-60 connector (female) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Motor DLE 170 M- Paramotors |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Rudder forward 80x28 "type Kato" |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | 18 mm wing servo holder |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Bidule 170 ARF 3.48 m |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Small control horn with bearing (2 pcs) |
2 x | Avia (Top Model) |
1 x | Bidule 55 2460 mm Cabina |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Small adjustable control horn with bearing |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Long horn 50x26 |
2 x | Bidule 111 3000 mm Canopy |
1 x | Short adjustable control horn 3x24 |
1 x | Albatros red/white (Top Model) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Astra (Top Model) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Avia spare blue cockpit (Top Model) |
1 x | Canopy Astra |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Bidule 111 3000 mm |
1 x | Small aluminium horn gold (2pcs) |
3 x | Albatros ,spare cockpit (Top Model) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Micro control horn (2 pcs) |
1 x | Canopy Sweet / Siesta |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Tube Pitot to PIXHAWK |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | MPX Support (2 pcs) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Red 4 mm connector holder |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Shirt Hispano Aviación |
1 x | 2 LiPo XH>EH adapter |
1 x | SBEC 40 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Male connector for 6 pines AWG |
1 x | PSC 6 |
1 x | SPS 70V 140/280 A |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | 800TVL CMOS camera for FPV |
1 x | USB Mini Camera endoscope |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Steel brush wheel with 2.35mm |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Circlick securite |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | MR30 connector male |
1 x | MR30 connector female |
1 x | Bag connector 2 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Conector Servo female 4 pines |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Red 3m5 mm connector holder |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Electric coversion set |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Prelude ARF 2500 mm (TopModel) |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | NoNa BB wheel Ø150x45mm in pair |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | COMFORT MOUNT ø 55 mm |
1 x | Ventus 2cx 4.5 m Canopy |
1 x | COMFORT MOUNT ø 25 mm |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Servo TOPMODEL DS9010 T |
1 x | Servo DITEX TD2612S |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 65 mm mini servo cover |
1 x | Tow hook for tug |
1 x | GRAFAS MAXI ARF |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | BULLIT Wing 1095 mm |
2 x | Angle of incidence meter |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Towing hook |
1 x | Fixed launching hook |
2 x | 90x60 mm standart servo cover |
1 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | Bidule 55 V3 2460 mm |
1 x | Angle measurer |
1 x | Cockpit metalic closing |
1 x | Ventus 2cx 4.5 m |
1 x | Connector CAN 15 |
1 x | Astra wing Joinner (Top Model) |
1 x | 58 mm micro servo cover |
1 x | Oracover Verde 2 m |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | Fascination 3600 mm ARC |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | MPX Support |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Navaho new design (Top Model) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | NoNa BB wheel Ø200x60mm in pair |
1 x | Prog Card V2 DUALSKY |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Servo TOPMODEL S7520 MG |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | 57 mm micro-mini servo cover |
1 x | XPower XC3522/5 LS |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Flip ARF (Top Model) |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Ka 8 B (Top Model) |
1 x | Towing hook <3m |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
1 x | EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn mando long (2 pcs) |
1 x | MIG AC 400 /14 |
1 x | 6 mm M3 variable inclined horn |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
|
26,477.06EUR |