1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | 20 mm carbon horn |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Tow hook for tug |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Horn 6/27 with M3 Bearing |
1 x | Cable with accesories |
2 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Towing hook <3m |
3 x | Horn 5/10 with M2 Bearing |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | RH long aluminium horn (2pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Horn 6/20 with M3 Bearing |
1 x | Horn 20x28,5 mm (2 pcs) |
3 x | SERVO HOLDER |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
3 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Horn 6/35 with M3 Bearing |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Horn 5/15 with M2 Bearing |
2 x | Horn 5/20 with M2 Bearing |
1 x | Small aluminium horn red (2pcs) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Cable control set |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Horn with ball 55x40 |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Towing hook |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Small aluminium horn blue (2pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Towing hook |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Horn with ball 40x30 |
2 x | Adjustable launching hook |
1 x | Antenna holder bracket double |
1 x | Large flex hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Miniature brass strap hinge, 1 m |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Gates hinge |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Extension silicon 10 cm (Futaba) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Extension silicon 30 cm female (Futaba) |
1 x | Premium servo extension 25cm |
1 x | Futaba male 40 cm extension |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Cabel "Y" 15 cm |
2 x | Extension 90 cm (Futaba) |
1 x | Extension 30 cm (Futaba) |
1 x | Premium servo extension 75cm |
2 x | Futaba Female 40 cm extension |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
3 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Circlick securite |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Cabel "Y" 30 cm (Futaba) |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | 800TVL CMOS camera for FPV |
2 x | USB Mini Camera endoscope |
1 x | Jeti Black cap |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Para-RC Mix |
1 x | Round Rod 3,0x1000 mm |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | XH male balance (5S) connector (2 pcs) |
2 x | LOWER TOW HOOK |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
3 x | Horn mando long (2 pcs) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Horn DUBRO 1/2A |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
3 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | 5 mm M2 variable horn |
2 x | Control horn long w/ball |
3 x | Horn 13,5x16 mm (2 pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Compact on-board starting system (9715) |
2 x | GLOW 2C + accesories |
1 x | Aluminium ignition bad (blue) |
1 x | DLE 30 complete electronic ignition |
1 x | Electromotor starter EME 35cc |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Aluminium ignition bad (red) |
1 x | SAITO FG-36 carburetor |
1 x | Reed valve for DA 50-R |
1 x | Starter EM Gear Power 80 |
1 x | Deposito DUBRO 1800cc-60oz |
2 x | Sparkplug 1/4-32 Glow |
1 x | Spark motor OS nº 8 |
1 x | Extension lead 15 cm Multiplex |
1 x | Extension 7.5 cm |
1 x | Extension 15 cm (Futaba) |
1 x | Soporte metal para servos |
2 x | SERVO DES 806 Pignons |
2 x | Servo HBS 690BB HV Digital |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 140 mm rods set for direction control |
2 x | "Taxi Tank" Fuel Tank |
1 x | Extension silicon 50 cm (Futaba) |
2 x | Extension silicon 75 cm (Futaba) |
2 x | 1000 cc gasoline fuel tank complet |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | Micro control horn T2 Ø 1 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Cooler motor type 400 |
1 x | Fan for A60 |
1 x | Motor mount for 1 m models |
1 x | Metalic motor holder for class 550-600 |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Small adjustable control horn with bearing |
1 x | Rudder forward 70x28 "type Kato" |
1 x | 5 mm M2 variable inclined horn |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Adjustable brass horn threaded M3 |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Long adjustable control horn 3x34 |
1 x | 6 mm M3 variable horn |
1 x | Horns indoor |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Indoor hinge with servo arm integraded |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Long adjustable control horn with bearing |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Straightened threaded rod M2-1m |
1 x | Small control horn with bearing (2 pcs) |
1 x | Frontal support Speed 280 |
1 x | Short adjustable control horn 3x24 |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Cooler motor type 150 |
1 x | Motor mount M |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Fixed launching hook |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Gearbox KPG27/28 4,7:1pinion |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Field folding model stand SebArt |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | AXI 2814/10 V2 |
1 x | AXI 2204 Multicopter |
1 x | 1000 ccm gasoline fuel tank |
1 x | Fuel line plugs (Black) |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Compact on-board starting system (9512) |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Starter EM Gear Power 250 |
1 x | GLOW 5C + accesories |
1 x | Opto Gas Engine Kill Switch |
1 x | Ignition bed V2 Red color |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Adapter SPEED 500/600 |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
1 x | Rocket D9-7 |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Avanti S 1.8m Jet White/Blue |
1 x | Avanti S Jet , Carrying bags (SebArt) |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | AXI 2820/14 V2 Long |
1 x | Adpater for mounting VMKG gearbox in 480 motor |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2826/8 V2 Long |
1 x | AXI 2820/8 V2 |
1 x | AXI 2814/12 V2 Long |
1 x | AXI 2808/24 V2 |
1 x | AXI 2820/12 V2 |
1 x | Recess mount-rem. glow plug set |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | T- Fittings red color (2pcs) |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Fuel Fittings-Gold |
1 x | Fuel Dot (Black) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | AXI 2820/10 V2 Long |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | AXI 2814/6D V2 |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
|
17,467.49EUR |