1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x Varilla acero Ø 5,0 mm x 1000 mm
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 2,5 mm x 1000 mm
2 x Varilla acero Ø 0,5 mm x 1000 mm
2 x Varilla acero Ø 4,5 mm x 1000 mm
1 x Varilla acero roscada M3 -1m
1 x Varilla acero Ø 2,0 mm x 1000 mm
2 x Varilla acero Ø 6,0 mm x 1000 mm
2 x Varilla acero Ø 1,0 mm x 1000 mm
2 x Varilla acero roscada M2 - 1m
2 x Varilla latón hexagonal Ø 4 mm x 1000 mm
2 x Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x Varilla acero Ø 3,0 mm x 1000 mm
1 x Carro remolque para veleros 720 x 285 mm
2 x Soporte para aviones
2 x Carro remolque para veleros 720 x 239 mm
2 x Medidor angulos y/o incidencias
1 x Soporte para aviones SebArt
2 x Medidor de incidencias
2 x Liston ABS 2.0x5.0x1000 mm
3 x Liston ABS 2.0x10.0x1000 mm
1 x Liston ABS 1,0x3,0x1000 mm
1 x Varilla ABS 1,0x1000 mm
1 x Liston ABS H 2,0x2,0x330 mm
1 x Liston ABS 1,0x5,0x1000 mm
2 x Varilla ABS 1,5x1000 mm
1 x Varilla ABS 5,0x1000 mm
1 x Liston ABS 1,5x8,0x1000 mm
1 x Varilla ABS 2,5x1000 mm
1 x Liston ABS 1,5x2,0x1000 mm
1 x Abrazadera con letrero (20 pcs)
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
2 x Varilla latón Ø 0,5 mm x 1000 mm
2 x Medidor ángulos
2 x Equilibrador hélices
2 x Soporte WingFix ULTRA BE
1 x Mono-Switch Memory FUTABA
1 x Slider Extenion for CORE
1 x Soporte Antena 2.4 Ghz (2 pcs)
1 x Soporte conector MPX (6 pcs)
2 x Receiver FrSKY Archer R8pro 2,4 Ghz
1 x Emisora FUTABA T18 SZ + R7208SB
1 x Sensor telemetria FUTABA SBS-01C
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Futaba FX36 2.4GHz FASST Test + R7008SB
1 x Correa emisora FUTABA
1 x Pupitre emisora V1 (L) (Rojo)
1 x Pupitre FUTABA 14SG/16SZ
2 x Capuchón M interruptor aluminio rojo
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Pupitre Contest-SPult mc-20/mc-24
1 x Emisora SPEKTRUM DX-9 (solo TX)
1 x Prolong/Adap correa Futaba T-10CG
2 x Capuchón M interruptor aluminio negro
1 x Capuchón M interruptor aluminio azul
1 x Capuchón L interruptor aluminio negro
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Capuchón M interruptor aluminio silver
1 x Bateria FUTABA 18MZ
1 x Arrancador EM Gear Power 80
1 x Acoplador 5 - 5 mm
1 x Sistema de arranque a bordo (9525)
1 x Capuchón decorativo interruptores TX
1 x Liston ABS H 1,5x1,5x330 mm
1 x Cierre cabina
1 x Encendido GLOW 2C + accesorios
1 x Plancha aluminio 500x250x0.5 mm
2 x Varilla latón Ø 0,8 mm x 1000 mm
1 x Bancada servo tandem 4,5-5" para 2 servos
1 x Bancada montaje servo S (rojo)
1 x Brazo servo aluminio V2-Futaba 1,75" M3 rojo
1 x Brazo servo aluminio V2-Futaba 1,25" M3 rojo
1 x Bancada montaje servo M (azul)
1 x Bancada servo tandem 4-4,5" para 2 servos
1 x Varilla latón hexagonal Ø 3 mm x 1000 mm
2 x Liston ABS 1,0x4,0x1000 mm
3 x Liston ABS 2.0x8.0x1000 mm
1 x Soporte aluminio para encendido (azul)
1 x Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x Interruptor OPTO Gas Engine
1 x Listón de HAYA redondo 4,0 x 1000 mm
1 x Cargador LiPo Charger4
1 x Liston ABS 2.0x3.0x1000 mm
2 x Varilla latón Ø 1,0 mm x 1000 mm
2 x Encendido glow remoto más set para montaje interior
1 x Sistema de arranque a bordo (9724)
2 x Encendido RCEXL A-02
1 x Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Varilla carbono 5.0 mmx1000 mm
1 x Soporte aluminio para encendido (rojo)
1 x Encendido para motor DLE 55
1 x Varilla ABS 3,0x1000 mm
1 x Extensión escape motor OS 120 AX
1 x Hélice POWER-PROP 7x7
1 x Brazo servo aluminio V2-Hitec 1,5" M3 azul
1 x Bancada servo tandem 3-3,5" para 2 servos
1 x Brazo servo aluminio V3-Futaba 3-3,5" rojo
1 x Brazo servo aluminio V2-Hitec 1,0" M3 azul
1 x SLICK 360-A 104" (2640 mm)
3 x EDGE 540-A 105" (2660 mm)
1 x ARS 300 91" ARF 2311mm ORANGE
1 x EDGE 540-A 74" (1880 mm)
1 x ANGEL 48" pp orange/black/white
1 x Conector banana oro 4 mm
1 x SLICK 360-B 104" (2640 mm)
1 x Medidor angulos tamaño pequeño
1 x Cable profesor/alumno FrSKY
1 x Emisora TARANIS Q X7
2 x Prolongador Cable S-Bus
1 x Varilla ABS 6,0x1000 mm
1 x Cono hélice fija 60 mm diámetro / eje 5,0 mm
1 x Rueda radios 270mm (2 pcs)
1 x Varilla acero Ø 1,5 mm x 1500 mm
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Logo 400 SE VBar
1 x Cono plástico blanco hélice fija 42 mm diámetro
1 x Cono plástico negro hélice fija 36 mm diámetro
1 x Soporte FPV Station para pupitre TX-Tray V1
1 x Stick para emisora FUTABA con interruptor de 3 posiciones
1 x Stick emisora V2/M3 rojo Duraluminio Futaba/Hitec/Spektrum
1 x Stick emisora V4/M3 Azul/Plata Duraluminio Futaba/Hitec/Spekt.
1 x Cable profesor-alumno T12FG/FX-30
1 x Soporte Guia Antena doble
1 x Motor autoarranque EME 35cc
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Sistema cierre 360 mm con abrazadera (2 pcs)
1 x Varilla acero Ø 1,5 mm x 1000 mm
1 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Cono plástico blanco hélice fija 30 mm diámetro
1 x Servo HITEC D625 MW
1 x Cono GM Propellers 42 mm / 6 mm Muleta "Z"
1 x Caja servo HS-225MG/225BB/5245MG
1 x Programador HPP-21 PLUS HITEC digital servos PC y Campo de Vuelo
1 x Set piñones servo HITEC HS-311/322/325BB
1 x Servo HITEC HS-311
1 x Set piñones servo HITEC HS-81
1 x Servo HITEC D950 TW
1 x Set piñones servo HITEC HS-125MG/5125MG
1 x Set piñones servo HITEC D645 MW
1 x Servo HITEC HS-5065 MG digital
1 x Servo HITEC D85 MG
1 x Set piñones servo HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC D954 TW
1 x Set piñones servo HITEC HS-7950TH
1 x Servo HITEC D131 MW nano
1 x Cargador HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Set piñones servo HITEC HS205/225MG/5245MG/7245MH
16,592.15EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas