1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Beech dowels 2.0 x 1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x Balsa panel 1.0x100x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x BALSA triangular 15x15x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Softshell Hispano Aviación
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x Release wax 250ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Spray YELLOW Inca Lexan 150ml
1 x 500 ml sealer (DOPE)
1 x Nitroverdu 500 ml
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x 
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Partall paste 650 g
2 x Ventus 1:4 set of instruments
1 x Oracover CHROME 2m
1 x Connectors DEANS 4 pins (1 pair)
1 x Horn with ball 55x40
1 x BALSA leading edge 8x10x1000 mm
1 x 1,5x50 mm allen screwdriver
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x Support conector MPX (6 pcs)
1 x Birch plywood plate 600x300x3.0 mm
1 x 1/4 Pilot "Heidi"
1 x 10 mm gas motor standoff
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Indoor Brushed motor kit
2 x MAMBO 17
1 x Cooler motor type 150
1 x Crystal Universal RX 35.150 Ch 75
1 x Crystal RX 35.120 Ch 72
1 x DLE 55 carburetor
1 x Deposito combustible tipo "turbina" 330 ml
1 x Brass control horn M2 large for wire (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn F3A de Titanium 16 mm (2 units)
1 x 5 mm M2 variable inclined horn
1 x 6 mm red aluminium threaded horn with patella
1 x Flybar support metal LAMA
1 x Red smoke canister 100 g
1 x Remote electric ignition system
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Green smoke canister 100 g
1 x Green smoke canister 140 g
1 x 500 ccm complete gasoline fuel tank
2 x Sparkplug 1/4-32 EVO 10GX
1 x Suction funnel for carburetor 90D-L (red)
1 x Fuel tank 500ml (17oz)
1 x Recess mount-rem. glow plug set
1 x Sparkplug Saito 400
1 x Quick hose connector 3-3 mm
2 x Sparkplug 1/4-32 Glow
1 x DLA 116 crankshaft
1 x Gasket electric Fuel Pump
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x 550 cc gasoline fuel tank complet
1 x GLOW 2C + accesories
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Connector Sub-D 2+5 Female
1 x CC 03
1 x 2 LiPo XH>EH adapter
1 x Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x 6 mm aluminium horn with patella
1 x Horn 16,5x20 mm (2 pcs)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Circlick securite
1 x 3 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Connector CAN 15
1 x 4 LiPo XH>EH adapter
1 x APM2.6 Power module with 5.3V DC BEC
2 x CC 02
1 x BEC 3A FOXY
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CM-3
1 x CC 01
1 x Battery charging cable XT60
1 x Cabel charger transmitter GRAUPNER
1 x DPS Switch JR/JR
1 x 30 cm BEC cable (male)
1 x 30 cm BEC cable (female)
1 x Dean "T" - Futaba Adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Double conector with JR adapter and 200 mm extension
1 x DPSI Ampere battery backer
2 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Connector Sub-D 2+5 Male
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Spinner Alumin. propeller pleg. 30 mm / 5,0 mm
1 x YAK-23 "FLORA" (RBC Kits)
1 x White smoke bombs AX-18 (5 pcs)
1 x White smoke canister 140 g
1 x Fan for A60
1 x Size "M" motor holder for class 400
1 x Motor holder AXI
1 x Cooler motor type 280
1 x Size "M" motor holder for class 400
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Cooler motor type 300
1 x Tool for entel
1 x Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x Electric coversion set
1 x Combo AM480 T-Motor 650 Kv
1 x Harness for transmitter JETI DUPLEX
1 x Central support Speed 600
1 x 
1 x SKY RC T400Q Charger 4x100w
1 x Charger SKY RC e680
1 x Charger SKY RC D200 neo
1 x Electric spoiler 250 mm (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x CA Glue (medium) 20g
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Foaming agent for epoxy resins 200 g
1 x 
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Spinner plastic white fixed propeller 42 mm
1 x DLE Ignition unit
1 x T-Hose connector 3-3-3 mm
1 x Compact on-board starting system (9525)
1 x Quick hose connector 3-3 mm
1 x RCEXL Electronic ignition twin A-02
1 x Fuel station 20L incl. pump electric
1 x Aluminium ignition bad (red)
1 x ULTIMATUM 2.0 m Red Bull
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x BULL MØ1 2.600mm "ALPINE"
1 x Set transmisions BULL Mo1 (dura/aluminium)
1 x Solvent Plasti Dip 1000 ml
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x CA Glue fast 20g
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Digital scale up to 40 kg
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Hardener Aero EPH 161 (250 g)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Conector FESTO M3 Quick 3mm 90º
1 x GLOW 5C + accesories
1 x T-Hose connector 6-6-6 mm
1 x GLOW 9C + accesories
1 x Filler Gauges
1 x Y-Hose connector 4mm
1 x Electromotor starter EME 35cc
3 x Sparkplug NGK CM6
3 x Spark motor OS Type F
2 x Bujia OS G5 gasolina
1 x Turbine LYNX 130
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x TP/TopFuel - XH 2/3S Adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Electric starter BEE (old)
1 x Tailormade cone A-10 Skymaster
1 x Turbine KingTech K45G4+
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Electronic switch JETI SP6 0-15v/6A
1 x SPS 70V 140/280 A
1 x Sparkplug DLE CM6
1 x FESTO connector M7 Quick 6mm 90º
1 x Selfstarr EME35
1 x Propeller diller for DLE111 and DA85-150
1 x FESTO connector M7 barb fitting XL Tygon
1 x Quick hose connector 4-4 mm
1 x Propeller diller for DLE170
1 x Propadapter for motor A50-V3
1 x FESTO connector M5 Quick 6 mm
1 x Sparkplug Champion RCJ-7Y for ZG
21,341.33EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies