Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Spikes Band (5 m)
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	CM-3
3 x	5 LiPo XH>EH adapter
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	CC 02
2 x	CC 01
1 x	SE Ring 480 mm (2 pcs)
3 x	TrainerCord (master-learner)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	SE Ring 360 mm (2 pcs)
1 x	Cabel charger transmitter GRAUPNER
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
3 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	White silicone 0,25 qmm wire (100 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Male Prolonger TP 4/5S
1 x	Extension 6 lipos XH > EH
1 x	SE Ring 400 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	Extension 5 lipos JST/C
1 x	Cable set PREMIUM, fuselage/wing
1 x	SE Ring 450 mm (2 pcs)
1 x	JETImodel DPS 40
1 x	SE Ring 250 mm (2 pcs)
2 x	CC 05
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Connector Sub-D 2+5 Female
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
3 x	Circlick securite
1 x	JETImodel SINGLE BEC
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	2 LiPo XH>EH adapter
1 x	CC 03
1 x	Male connector for 6 pines AWG
1 x	Adapter lead MPX/EC3
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 LiPo XH>EH adapter
1 x	MPX-Dean "T" Adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	1000 ml sealer (DOPE)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Spray EC Red 400ml
1 x	Partall paste 650 g
1 x	Propeller balancer
2 x	Presto SF Light Filler styrene-free (420 g)
1 x	Blind nut M4 (10 pcs)
1 x	T-shape holder metal LAMA
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	Battery RX JETI LiIon RB 6200 7.2v
2 x	Tester LiPo/LiIon/LiMn/LiFe
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	VTX 477 Carbon Rotorblade
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Aluminium battery holder red
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Beech dowels 3.0 x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Paint gun for sprays
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Angle measurer
1 x	Field folding model stand SebArt
1 x	20 g tin paste
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Tape GFK 50 mm
1 x	Tape GFK 25 mm
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x	Spark Ceramic JETCENTRAL
1 x	Spray adhesive AEROFIX 2
1 x	Solvent Plasti Dip 1000 ml
1 x	Canopy Latch
1 x	Adjustable brass horn threaded M3
1 x	4 blades set
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	A50 Backmountset complete
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Extension 2/3 lipos JST - JST/C
1 x	Axle for motor A20-S (3 uds)
1 x	Cable adapter iCharger
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Ball Bearings for motor A60-V2
1 x	Female connector for 10 pines AWG
1 x	Nitroverdu 500 ml
1 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste white 50 g
1 x	500 ml sealer (DOPE)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Universal Colour Paste deep black 50 g
1 x	Spannlack 1000 ml
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	T-Motor U7-V2.0 Kv420
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Connector CAN 15
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	A50 Backmountset complete
1 x	MZ-18, 9 Channel HoTT
1 x	Foam plastic plates (310x210x2 mm)
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Foreman, scale 1:32
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	75 mm INO spinner (carbon imitation)
1 x	Falcon Carbon Spinner 82mm for electric motor
1 x	Conector JAPAN G2 Set 5 pares
1 x	Charger LiPo Charger4
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	MZ-12, 6 Channel HoTT
1 x	Quick hose connector 6-4 mm
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 102 mm Black
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Tail tube RAINBOW
1 x	Blade Holder Full (4 blades)
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Universal batery Tester
1 x	Fuselage Autogyro RAINBOW
1 x	Blade Holder (3 blades)

7,446.91EUR