1 x | Extractor piñones 2.3/3.2 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Spikes Band (5 m) |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | CM-3 |
3 x | 5 LiPo XH>EH adapter |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Cinta Goldfix 1m |
1 x | CC 02 |
2 x | CC 01 |
1 x | SE Ring 480 mm (2 pcs) |
3 x | TrainerCord (master-learner) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | SE Ring 360 mm (2 pcs) |
1 x | Cabel charger transmitter GRAUPNER |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Male Prolonger TP 4/5S |
1 x | Extension 6 lipos XH > EH |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 20x200 mm battery rings |
1 x | Extension 5 lipos JST/C |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | SE Ring 450 mm (2 pcs) |
1 x | JETImodel DPS 40 |
1 x | SE Ring 250 mm (2 pcs) |
2 x | CC 05 |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Connector Sub-D 2+5 Female |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | Circlick securite |
1 x | JETImodel SINGLE BEC |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | 2 LiPo XH>EH adapter |
1 x | CC 03 |
1 x | Male connector for 6 pines AWG |
1 x | Adapter lead MPX/EC3 |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 3 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1000 ml sealer (DOPE) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Spray EC Red 400ml |
1 x | Partall paste 650 g |
1 x | Propeller balancer |
2 x | Presto SF Light Filler styrene-free (420 g) |
1 x | T-shape holder metal LAMA |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | VTX 477 Carbon Rotorblade |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Aluminium battery holder red |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Paint gun for sprays |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Angle measurer |
1 x | Field folding model stand SebArt |
1 x | 20 g tin paste |
1 x | Trailing edge BALSA 35x8x1000 mm |
3 x | BALSA trip 10x10x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
3 x | BALSA trip 6.0x6.0x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
3 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Tape GFK 50 mm |
1 x | Tape GFK 25 mm |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
1 x | Spark Ceramic JETCENTRAL |
1 x | Spray adhesive AEROFIX 2 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Canopy Latch |
1 x | Adjustable brass horn threaded M3 |
1 x | 4 blades set |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | A50 Backmountset complete |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Axle for motor A20-S (3 uds) |
1 x | Cable adapter iCharger |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Ball Bearings for motor A60-V2 |
1 x | Female connector for 10 pines AWG |
1 x | Nitroverdu 500 ml |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Universal Colour Paste white 50 g |
1 x | 500 ml sealer (DOPE) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Universal Colour Paste deep black 50 g |
1 x | Spannlack 1000 ml |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Connector CAN 15 |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | A50 Backmountset complete |
1 x | MZ-18, 9 Channel HoTT |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Foreman, scale 1:32 |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Charger LiPo Charger4 |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | MZ-12, 6 Channel HoTT |
1 x | Quick hose connector 6-4 mm |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Spinner INOVA 102 mm Black |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Tail tube RAINBOW |
1 x | Blade Holder Full (4 blades) |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Universal batery Tester |
1 x | Fuselage Autogyro RAINBOW |
1 x | Blade Holder (3 blades) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Axle for motor A30-XL V2 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
|
7,707.96EUR |