Top » Catalog » Hardware » Transmitters/Receivers » Receivers » Hacker » HK22985482

17.45EUR

JETImodel Addcap 820
[HK22985482]

Description:
AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your battery to your ESC need to be lengthened more than 20cm (8 inches).

In case the wires are longer, use one AddCAP 820 for each 20cm (8 inch) section. Another advantage of adding an additional capacitor is to reduce possible interference which may be caused by current moving through your power wires. Recommended for use with 2.5-6 mm2 (14AWG – 10AWG) wires.

Specificationes:
- Weight: 13 g
- Dimensions: 60x19x18 mm
- Input voltage max. 59 V
- Capacity: 820 mF

few units

Reviews

Customers who bought this product also purchased

TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG

few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH male balance (5S) connector (2 pcs)
1 x	Conector BEC female (10 pcs)
2 x	Connectors DEANS (T)
2 x	XH female balance (5S) connector (2 pcs)
2 x	XH female balance (3S) connector (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 4 mm (M/F)
2 x	Gold antispark 4 mm plug
1 x	XH female balance (4S) connector (2 pcs)
2 x	XH male balance (3S) connector (2 pcs)
2 x	Gold antispark 5,5 mm plug
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector BEC male (10 pcs)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
3 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
3 x	Beech dowels 3.0 x 1000 mm
3 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
3 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
3 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Horn 5/10 with M2 Bearing
1 x	Circlick securite
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	120x60 mm SLH KOVO wheel
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	BALSA trip 4.0x4.0x1000 mm
3 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
2 x	Balsa panel 8.0x100x1000 mm
2 x	A/C quality beech plywood 600x300x5.0 mm
2 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Blades 330mm
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Blade holder metal LAMA
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	DA-50R motor alumine support
1 x	Cylinder DA-50R, DA-100, DA-100L
2 x	Carburetor for DA150L/170
2 x	Motor Saito FG-60 R3, 60 cc
1 x	Motor Moki S 400 cc 5 cylinders
2 x	Carburator gasket MOKI
1 x	Baffles for Radial Moki S180/320 mm
1 x	Carburator Moki S 180
2 x	Carb Carrier, red DA-85, DA-100L and DA-120
2 x	BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x	Motor Saito FG-73 R5, 72.7 cc
1 x	Moki Exhaust Bend 200 mm
1 x	Motor MOKI S 350 cc 7 cylinder
2 x	Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA
1 x	Air filter MOKI
1 x	Carb Carrier, red DA-150L/170
1 x	Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
2 x	Aluminium-screw, M5x16mm Red
1 x	Moki Exhaust Bend 50VT
1 x	MOKI S250 Intake Bend
1 x	O-Ring SAITO FG-60 R3
1 x	Ball bearing middle DA-50/DA60/VM120B2
2 x	Ball bearing middle DA-120
1 x	Regler autostarter MOKIS250
1 x	Moki Carburetor Throttle Arm with Extension
1 x	Escape Moki 100 BVT
2 x	Cylinder for DA-85/170 (1 piece)
1 x	Towing hook <3m
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	25 mm reinforced hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
2 x	Shaft for A60-L (140mm)
2 x	Propadapter for motor A50
1 x	DUPLEX 2.4EX RC Switch
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	Propadapter for motor A50-V3
2 x	quality beech plywood BIRCH 600x300x2.0 mm
3 x	Pine wood slat 6.0x6.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Balsa panel 2.0x100x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Balsa panel 1.5x100x1000 mm
2 x	Birch plywood plate 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x	Mounting frame MPX female connector
1 x	Optotronix Aurora Plug
1 x	XH female balance (9S) connector (2 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	XT-90 connector (pair)
1 x	Connectors MPX male (PIN double)
1 x	Connectors MPX 8 pins (green) 1 pair (male-female)
1 x	MPX PCB "6 Pins", 5 pieces
1 x	Connectors MPX black female
1 x	Connectors DEANS (T) micro
1 x	XH male balance (8S) connector (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	Red 3m5 mm connector holder
1 x	MPX screwable clips (4 pcs)
1 x	Soporte carbono MR30 (2 pcs)
1 x	XH male balance (2S) connector (2 pcs)
1 x	MPX Support
1 x	Contacto macho pin conector (10 pcs)
1 x	XT-30 connector (pair)
1 x	Servo Connector Brackets (10 pcs)
1 x	XH female balance (7S) connector (2 pcs)
1 x	MPX Support (2 pcs)
1 x	XH LiPo extension lead
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	FESTO connector M7 Quick 4 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	29x12 prop Super Silence
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	QS Bulkhead Valve 4/4 mm
1 x	Short reed valve petal for DA 100-R carburator
1 x	Steel cylinder screw DA50/60/100/120
1 x	L ELBOW 90º ø 25 mm
1 x	DA-100 Bearing
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Turbo light spinner cap white 32mm
1 x	Backmountset complete A40
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	Connectors DEANS 4 pins (1 pair)
1 x	MPX Sub-D Adaptor
1 x	XH male balance (7S) connector (2 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	MPX housing with flange (4 pcs)
1 x	Connectors MPX female (PIN double)
1 x	Protector Connector Dean-T (1 pair)
1 x	Mounting frame MPX male connector
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	MR30 connector male
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	XT-60 connector (female)
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Red 4 mm connector holder
1 x	MPX PCB "4 Pins", 5 pieces
1 x	MPX screwable clips (5 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	XH female balance (8S) connector (2 pcs)
1 x	Connectors MPX male
1 x	Check valve quick hose connector 4-4 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	FESTO connector M7 barb fitting 6mm
1 x	28x12 prop Super Silence
1 x	FESTO connector M5 Quick 4 mm
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Reed valves, set DA-100/150/150L/170
1 x	Cylinder for DA-60 and DA-120
1 x	Prop washer for DA-85, DA-100, DA-100L, DA-120
1 x	Front axi for DA85/DA100/DA100L/DA120
1 x	Carburator spacer block DA-50R
1 x	Crankcase Gasket set for DA-60 / DA-120
1 x	Crankcase gasket DA-100
1 x	Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x	Exhaust gasket DA-150
1 x	Exhaust gasket DA-35 and DA-70
1 x	Cylinder Gasket set for DA-60 / DA-120
1 x	Cylindergasket DA 170
1 x	MR30 connector female
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Shaft for A60-L V4
1 x	A60-6XS V4 28-Pole
1 x	Cable adapter iCharger
1 x	Axle for motor A30-XL V2
1 x	EDF Stream-Fan 110mm kv780
1 x	Fan for A60
1 x	Screwdriver for Torx® TX6
1 x	FesEx-Uni8 System
1 x	FesEx-Uni6 System

20,206.93EUR