Top » Catalog » Motors & Turbines » Electric » Brushless » Mega » MEGA16155CEF5J

85.00EUR

Motor Mega AC 16/15/05 CE F5J
[MEGA16155CEF5J]

Brushless motor MEGA ACn 16/15/x. Diameter 28mm, length 36,4mm, weight 76g.
Specifications
-Hardened stell shaft, diameter 5.0 mm.
-Two precise ball bearings
-Dynamically balanced
-Neodym magnet rotor
-Handmade stator, lightweight rotor allows high revolution.
-Kevlar bandage rotor
-Motor mount has two M3 threads for two M3 screws
-Efficiency up to 88%
-COMBAT version is designed for higer mechanical requirements, shaft diameter 5 mm.
-Recommended gearbox: MEGA GEAR 16
-Size and weight of these motors are the same as brushed motors of product line MIG 400. They have much better efficiency, power, max. revolutions and long lifetime. For example with motor MEGA ACn 16/15/8 and 8 cell aerobatic model you more than double the time of flight compared to MIG 400 motor.
-Motors are also suitable for 50 - 70 mm diameter ducted fan.
-At special request we can cupply also motor Mega ACn 16/15/4 with non-standart shaft with diameter 2,3mm. We can recommend this power drive for helicopter models MicroStar 400 (Graupner) Zoom 400 (Protech) with weight 650 - 700 g, 3 cells Li-Pol 3S1P 1500 – 1800 mAh. 11,1V , current supply approx. 10A, recommended controller 25A. (more in "RC Revue 06/2005" magazine (pages.50-51) - in Czech).

temporarily out of stock

Reviews

Customers who bought this product also purchased

Altimeter Altis V4 temporarily out of stock	Propeller Pleg CAM Carbon 10x6 temporarily out of stock	Spinner propeller pleg. 38 mm / 5 mm temporarily out of stock
Ø 40 mm fiberglass motor-holder for electric motors temporarily out of stock	Spinner propeller pleg. 30 mm / 5,0 mm temporarily out of stock	Ø 28 mm fiberglass motor-holder for electric motors temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ABS tube 9.0x8.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
2 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 6.0x5.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
2 x	ABS tube 7.0x5.0x1000 mm
2 x	Pine wood slat 10x10x1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
3 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
3 x	Walnut wood slat 2.0x2.0x1000 mm
3 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Gold antispark 5,5 mm plug
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	30 cm DEANS female connector
1 x	Conector Servo female 4 pines
1 x	Conector BEC male (10 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	6 mm red aluminium threaded horn with patella
2 x	Horn 20x28,5 mm (2 pcs)
2 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Horn 6/35 with M3 Bearing
2 x	SlowFlyer control horn (3 pcs)
1 x	6 mm aluminium horn with patella
1 x	Horn for flap control (1 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Small aluminium horn blue (2pcs)
2 x	800TVL CMOS camera for FPV
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	Extension silicon 30 cm female (Futaba)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	30 cm BEC cable (male)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	SCHARNHORST accessories
2 x	Vacuum bag, 1200 mm x 50 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Balsa panel 5.0x100x1000 mm
2 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	20 mm carbon horn
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	6 mm blue aluminium threaded horn with patella
2 x	Brass control horn M4 short for wire (4 pcs)
1 x	Round Rod 1,25x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Cable control set
1 x	Short adjustable control horn 3x24
1 x	Micro control horn (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Small aluminium horn red (2pcs)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn mando long (2 pcs)
1 x	6 mm M3 variable horn
1 x	Control horn long w/ball
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	5 mm M2 variable horn
1 x	Brass control horn M4 long for wire (4 pcs)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn with ball 40x30
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Universal Colour Paste deep black 250 g
2 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Release wax 250ml
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Universal Colour Paste deep black 50 g
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Universal Colour Paste white 50 g
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Release film 100 cm x 50 m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Birch plywood plate 600x300x3.0 mm
1 x	PHASOR RACE 2035/2100 2D
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	PHASOR RACE 2035/4100 1D
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm

5,218.95EUR