1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Tape GFK 50 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
2 x | Tape GFK 38 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Cinta Goldfix 1m |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Spikes Band (5 m) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 200 mm (2 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | CC 02 |
1 x | 2 LiPo XH>EH adapter |
1 x | CM-3 |
1 x | CC 05 |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | USB HLS prog. interface |
1 x | BEC 3A FOXY |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
3 x | 3 LiPo XH>EH adapter |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Towing hook |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Xplorer4 anemometro |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | Hot Glue Stick GREEN |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Hot Glue Stick RED |
1 x | Hot Glue Stick BLACK |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
2 x | Digital precision scale up to 2000 g |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
2 x | Baseplate servo |
1 x | Micro flex hinge (12 uds) |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | PPM Encoder Module |
1 x | BALSA trip 10x10x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Extension 15 cm (Futaba) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Wheel 18 mm |
1 x | Motor ACTRO 28-4-880 |
1 x | SC NAVY V15R |
1 x | Fishing boat Jule Fischkutter |
2 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | 30 cm BEC cable (female) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Xplorer3 anemometro |
1 x | 30 cm BEC cable (male) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Fixed launching hook |
1 x | PSC 6 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Connector Sub-D 2+5 Female |
1 x | CC 03 |
1 x | Circlick securite |
3 x | 4 LiPo XH>EH adapter |
1 x | DPS Switch JR/JR |
1 x | Connector Sub-D 2+5 Male |
1 x | Male connector for 6 pines AWG |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | TrainerCord (master-learner) |
1 x | Xplorer1 anemometro |
1 x | 51 mm aluminium spinner. |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Spinner 102 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | 38 mm aluminium spinner. |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | Spinner 90 mm GFK |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Servos security connector (2 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Mobile Terminal |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Metal clevis M2,5 (10 uds) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
2 x | Pulley brass 10/2 (2 pcs) |
2 x | Metal clevis M3 (10 uds) |
2 x | Micro clevis (10 uds) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
2 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Black large kwik link (10 pcs) |
1 x | Aluminium servo arm (2 uds) |
1 x | AC-10 pre-rotacion with motor |
1 x | Spinner 105 mm GFK |
1 x | Xplorer2 anemometro |
1 x | Dust collector for mould cleaning |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Spinner 105 mm CFK |
1 x | Spinner 110 mm GFK |
1 x | Spinner 100 mm CFK |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Motor OS 3820-1200 electric |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Switching module high voltage SXH |
1 x | Vacuum pump 12 CFM |
1 x | 800TVL CMOS camera for FPV |
1 x | Extension Arm for Carburetor (red) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Landing gear Rocket 400 |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | SWTU2 switch |
1 x | SBEC Jeti |
1 x | DSM 10 Dual Switch Mixer |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Interruptor SPS 70v 60/120A |
1 x | UBEC 6A KAVAN |
1 x | SPARK Switch 5.9v |
1 x | SBEC 40 |
1 x | SBEC 30 D |
1 x | FX three-position switched channel, long |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Three-position switched channel, short |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | SPS Remote switch actuator |
1 x | MAX BEC |
1 x | LiPo Storage Box Type "BIG" |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Carburator Moki S250 |
1 x | RX cabel |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | EWC6 40 cm wing connector |
1 x | Ball Link Plier |
1 x | Blue smoke canister 100 g |
|
7,229.73EUR |