Inicio » Catálogo » Parapentes/Paracaídas/Mangas » OP13103

69.00EUR

Paramotor BackPack XXS 2
[OP13103]

BACKPACK XXS2

The most successful Backpack XXS2 for indoor Paraglider has been improved in details.
G10 is used in the aerospace industry and is virtually indestructible. The Backpack XXS2 development has already ensured that the product will be delivered to the customer to ease the mounting. The Prop ring wins stability with its additional holders and you will be also able to attach your ledstrip on it. By introducing a new intermediate carrier, it is now even easier to position the components such as receiver and controller, in a professionnal way. This will allow you to have more room to carry a larger Lipo.The attachment on the frame of a FPV Cam including its transmitter is now easily allowed. The new spacer for the RC Paraglider now promise more stability. Thus, the control commands are implemented even more directly. The standard arms had been extended by 5 mm(0.20in), and optionally acroarms can be purchased. The new Backpack XXS2 of Opale Paramodels is the reference for indoor RC-Paraglider and just the right Backpack for your indoor flights. Combinated with the Oxy 0.5 of Opale Paramodels, by adding some weight, the enjoyment factor is simply multiplied and you will be able to fly outside, under no or weak wind conditions.

Compatibility
Oxy 0.5

Included:
1 x BACKPACK XXS2 Black Frame
2x 2.2kg.cm servomotors

Required and not included:
Oxy 0.5
Motor set for Backpack XXS2 ( from 63 to 103W)
Battery 2S / 3S Lipo 800 - 1500mAh
FPV Camera
2.4ghz Transmitter with receiver and Rc Paramodels mixer
Charger

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
2 x	Manga viento Ozone S - 700 mm
1 x	Para-RC Mix
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Paramotor Trike XL
1 x	Vela OXY 5.0 m2
1 x	Paracaidas rescate "RC-Evo-Cross"
1 x	Paracaídas P4
1 x	Motorización Trike XL (motor+regulador+helice)
1 x	Recambio lonas Hovercraft
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Paracaídas PV6 para F3J
1 x	Paramotor BackPack XXS 2
1 x	Ballast 700gr OPALE
1 x	Mochila OPALE paramodels
2 x	e-Looger V3
1 x	Bird (Aero-naut)
1 x	Bateria arranque incl. compresor inflado
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Gancho remolque inferior plano
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Gancho de remolcador
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Gancho de remolque hasta 3m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Gancho de lanzamiento fijo
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Gafas Innovation Plus
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Gancho de lanzamiento regulable
1 x	Arandela 2.7 mm (20 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Circlick para eje 1.5 mm (10 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Soporte ventral para AX-18/AX-60
1 x	Brazo direccional 16 mm Ø 3 mm
1 x	Cartucho de humo Verde 100 g
1 x	Cartucho de humo Blanco 140 g
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Listón de PINO 3,0x5,0x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Modulo PPM Encoder
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Bisagra de Flaps (6 uds)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra papel CA (12 uds)
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra correa de latón en miniatura 1m
1 x	Suncover 100cc Red
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Bisagra 15 mm reforzada
1 x	Circlick para eje 1.9 mm (10 pcs)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Iniciadores eléctricos cohetes (6 pcs)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Listón de PINO 10x10x1000 mm
1 x	Borde Salida BALSA 35x8x1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Cartucho de humo Azul 140 g
1 x	Cartuchos de humo AX-60 amarillo (5 pcs)
1 x	Cartucho de humo Azul 100 g
1 x	Cierre de plástico para cabinas
1 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Cartucho de humo Blanco 100 g
1 x	Cierre cabina V1 M3 Rojo (2 pcs)
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Helice APC 10x4.7
1 x	Helice APC 13x4 Electric Pusher
1 x	Helice APC 12x10 Electric
1 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Motor OS 50 SX-Hyper
1 x	Motor OS 37 SZ-H
1 x	Motor OS 95 AX

6,979.31EUR