1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Varilla latón Ø 0,5 mm x 1000 mm
1 x Varilla latón Ø 1,0 mm x 1000 mm
2 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Varilla acero Ø 6,0 mm x 1000 mm
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Brazo servo 17 mm con rótula HITEC
1 x Varilla acero Ø 0,5 mm x 1000 mm
2 x Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x Brazo servo redondo 30 mm Futaba
1 x Tapa de servo mini 65 mm
1 x Servo TOPMODEL DS9010 T
1 x Tapa de servo micro 58 mm
1 x Servo TOPMODEL STANDARD S3217
1 x Tapa de servo estándar 90x60 mm
1 x Brazo doble servo Alu eje 3 mm
1 x Servo HITEC HS-225 BB
1 x Servo HITEC HS-485 HB
1 x Servo HITEC D954 TW
1 x Servo HITEC HS-311
1 x Brazo servo 46 mm Futaba con rótula
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Bancada servo SAVOX SV-1260MG
1 x Servo SAVOX SB-2271 SG
1 x Servo SAVOX SH 0254
1 x Servo ROBBE FS-31 Pico Servo
1 x Servo SAVOX SH 1290 MG digi
1 x Servo SAVOX SV-0236 MG HV
1 x Servo SAVOX SW-1250 MG digi
1 x Servo HITEC D145 SW
1 x Servo HITEC HS-5070 MH Hi Volt
1 x Servo HITEC HS-325 BB
1 x Bancada servo alas HS80/HS81/82/85 (2 pcs)
1 x Adaptador de hélice 10 mm M12
1 x Disipador motor tipo 150
1 x Disipador motor tipo 280
1 x Aero-Master (Aero-naut)
1 x Bomba de humo JETs PowerBox 2 salidas
1 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x Varilla acero Ø 2,0 mm x 1000 mm
1 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Varilla acero Ø 4,5 mm x 1000 mm
1 x Helice Carbono 12.5x7
1 x Helice GM 20x13 Carbon
1 x Adaptador de hélice 5 mm M6
1 x Adaptador prision. 5 mm/M8 "long"
1 x Helice 8x4 Electric
1 x Servo HITEC HS-225 MG
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 7,0 mm x 1000 mm
1 x Varilla latón Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 4,0 mm x 1000 mm
1 x Varilla acero Ø 3,0 mm x 1000 mm
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Varilla acero Ø 5,0 mm x 1000 mm
1 x Helice Carbono 13x7.5
1 x Helice Carbono 13x9
1 x Helice Carbono 14x7
1 x Helice Carbono 14x8
1 x Disipador motor tipo 400
1,652.48EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas