Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice Falcon 22x12 eléctrica
105.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Arandela de bloqueo 3 mm (10 pcs)
2 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
2 x	Arandela abierta 2.6 mm (20 pcs)
2 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
2 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Circlick para eje 2.3 mm (10 pcs)
2 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Arandela de bloqueo 3.5 mm (10 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Circlick para eje 1.9 mm (10 pcs)
2 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Arandela 3.2 mm (20 pcs)
2 x	Anemometro Xplorer2
2 x	Anemometro Xplorer4
1 x	Anemometro Xplorer3
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
2 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Bascular < 40 Kg
2 x	Cera desmoldemante "Alta Temperatura" 340g
2 x	Acelerador Aero EPH 161 (500 g)
2 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Cianocrilato MD GA460 odourless 20g
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	Cinta Roving carbono 20m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Canulas repuesto Mixing tube 50+25g (10 pcs)
1 x	Acelerador Aero EPH 161 (250 g)
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
2 x	Bolsa vacio 1200 mm x 50 m
1 x	Termo-retráctil azul tubo de 6,4x1000 mm 2:1
1 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Termo-retráctil rojo tubo de 1,2x1000 mm 2:1
1 x	Rótula con rodamiento M3 22x5,5
1 x	Conexion PREMIUM fuselaje/alas 120/40 cm one4one
1 x	Tubo ABS 9,0x7,0x1000 mm
2 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Tornillo Servos M2x7/16 (4 pcs)
1 x	Tornillo allen M2x12
2 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Tornillo allen M3x30 (10 pcs)
3 x	Tuerca para insertar M4 (4 pcs)
1 x	Tornillo allen M4x30 (10 pcs)
2 x	Tornillo Servos M2x5/16 (4 pcs)
1 x	Tornillo allen M2x10
1 x	Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
2 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Tornillo allen M4x20 (10 pcs)
1 x	Tornillo allen M2x5
1 x	Pasador Ø 2 x 6 mm (10 pcs)
2 x	Tuerca para insertar hexagonal M3 Br (4 pcs)
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo M3x0,5x12 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillos 2,2 x 6,5 mm (20 pcs)
2 x	Tornillo M2.2x6.5 (10 pcs) Especial cabinas, tapas servos
1 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Tuerca autoblocante M2 aluminio azul (4 pcs)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Tuerca hexagonal M4 (10 pcs)
2 x	Tuerca autoblocante M4 (10 pcs)
1 x	Arandela 1.7 mm (20 pcs)
2 x	Adaptador 8 mm para AXI53xx
2 x	CORTEX
2 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Adaptador PH5 para eje de 5mm M8 para AXI2820 y 2826
1 x	Adaptador de hélice 4 mm M6
1 x	Adaptador de hélice 3,2 mm M5
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Fibra de vidrio 49 g/m² (1,27 x 10m)
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Bascula precisión 0.1- 600 g
2 x	Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Fibra de vidrio 163 g/m² 1 m x 5 m (Twill)
1 x	Fibra de vidrio 163 g/m² 1 m x 10 m (Aero, finish FK 144, plain)
1 x	Adaptador de hélice 2,3 mm M5
1 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Tuerca hexagonal M1 (10 pcs)
1 x	Epoxy 40 min. (240g) 200g Resina / 40 Hardener
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Fibra carbono molida 100g
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Acoplador M3 (10 uds)
1 x	Tornillo M3x0,5x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Tuerca autoblocante M5 (10 pcs)
1 x	Tornillo allen M3x9 mm (4 pcs)
1 x	Tuerca autoblocante M2 (10 pcs)
1 x	Tuerca autoblocante M4 aluminio azul (4 pcs)
1 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Tuerca autoempotrable M4 (4 pcs)
1 x	Tornillo allen M2x8
1 x	Tuerca autoblocante M3 aluminio (4 pcs)
1 x	Tuerca para montaje M2 (4 pcs)
1 x	Tuerca autoblocante M6 (10 pcs)
1 x	Tuerca autoblocante M2,5 aluminio (4 pcs)
1 x	Tuerca hexagonal M2.5 (10 pcs)
1 x	Clips scape Ø25 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Hélice 3x2
1 x	Cable USB CORTEX DEMON Bavarian
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Cargador LiPo Charger4
1 x	Cargador POLARON EX 800 W
1 x	Adaptador de hélice 3.17 mm CN-Spinner
1 x	Brazo servo "L" 65x49 mm (2 pcs)
1 x	Eje barco 290 mm 4/4 mm
1 x	Soporte mástil 12 mm
1 x	Escaleras 3 mm (L 100 mm)
1 x	Hélice de 25,0 mm 3-BL M4 (hélice izquierda)
1 x	Adaptador de hélice 3 mm M6
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
2 x	Conector FESTO M7 Quick 6mm 90º
2 x	Tubo carbono (L 2000 mm, Ø16 mm, Ø14 mm)
2 x	Conector "T" tubo color Rojo (2 pcs)
2 x	Conector FESTO M7 racor XL Tygon
2 x	Thixotropic agente tin/15g (aprox. 350 ml)
2 x	Deposito combustible tipo "turbina" 330 ml
2 x	Tubo carbono (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	Carburador para DLE 55
1 x	Thixotropic agente TM100, tin/75g (aprox. 1 L)
1 x	Cianocrilato CA Gast 20g
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Conector FESTO M5 Quick 6 mm
1 x	Resina Molde P 10 kg
1 x	Carburador para SAITO FG-36
1 x	Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x	Trompetilla admisión carburador DA70 hasta 190 Engine(rojo)
1 x	Conector empalme tubo de combustible (gold)
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Tubo carbono (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Conector empalme tubo de combustible (rojo)
1 x	Caja de válvulas DA 50-R
1 x	Depósito de gasolina de 550 cc completo
1 x	Conector FESTO 3-3mm
1 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Deposito combustible 1500 ml (50oz)
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Rodillo teflon 80 mm x 15 mm Diam.
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Conector FESTO "T" 4-4-4 mm
1 x	Depósito de gasolina de 500 ccm
1 x	Conector FESTO 1/8 Quick 6mm 90º
1 x	Conector FESTO "Y" 4-4-4 mm
1 x	Conector FESTO M7 Quick 4 mm
1 x	Carburador completo para DA 85 / DA 100 / DA 100 L
1 x	Tubo carbono (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Tubo carbono (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Rodillo teflon 40 mm x 15 mm Diam.
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Brazo aluminio ext. carburador (rojo)
1 x	Trompetilla admisión carburador WALBRO 20-80cc (rojo)
1 x	Depósito de gasolina de 280 cc completo
1 x	Depósito de gasolina de 500 ccm completo
1 x	Resina Epoxy L (2.5 Kg)
1 x	Release film 100 cm x 50 m
1 x	Conector FESTO 6-4mm
1 x	Conector FESTO 4-3mm
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x	Conector "T" tubo color azul (2 pcs)
1 x	Bancada 45% Hopper JetsMunt
1 x	Depósito de gasolina de 1500 ccm completo extra fuerte
1 x	Deposito combustible 500 ml (17oz)
1 x	Trompetilla admisión carburador 90D-L (rojo)
1 x	Carburador WALBRO para MVVS 26/30/35/40 cc
1 x	Plancha fibra vidrio 620x540x1,0 mm
1 x	Brazo aluminio ext. carburador
1 x	Conector FESTO M5 Quick 4 mm
1 x	Trompetilla admisión carburador 90S-M (rojo)
1 x	Carburador WALBRO para EME 55 cc
1 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Conector FESTO M7 racor 6mm
1 x	Depósito de gasolina de 1000 ccm
1 x	Repelente agent PVA 250 ml
1 x	Depósito de gasolina de 250 ccm completo extra fuerte
1 x	Resina P+acelerador (EPH161-P)kit 585g [500g res+85g ace]
1 x	Conector FESTO "T" 3-3-3mm

8,307.32EUR