1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x Fox MDM 1 4000 mm DeLuxe
2 x Fox 4000 mm (Airwold)
2 x Ventus 2cx 4,5 m de Luxe
2 x Fox MDM 1 6000 mm
1 x SHK 4000 mm Scale 1:4.25
1 x Fox MDM 1 4000 mm DeLuxe,cabina
2 x Kobuz 5000 mm (Airwold)
1 x DG-303 ACRO 3750 mm, cabina
2 x Swift S1 De-luxe ARF 3.140 mm(TopModel)
1 x Fournier RF-4D
1 x Swift 5050 mm (Airwold)
2 x SAGITA Alsema 4,0 m
2 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x ASK 21 6.8m
1 x Swift S1 De-luxe JEPPESEN ARF 3.140 mm(TopModel)
2 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x DG-303 ACRO 3750 mm (Airworld)
1 x SOLOFOX 5m Voll-GfK
1 x Set cinturones Scale 1/4
2 x Fox 4000 mm con flpas (Airwold)
1 x Ventus 2cx 4,5 m, Fuselaje
1 x Fox MDM 1 4000 mm Std.
2 x LO 100 ARC 3.3m,marco cabina
2 x DG-303 ACRO 3750 mm, winglets
1 x Profundidad VENTUS 2cx 4.5m
3 x LO 100 ARC 3.3m
2 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
2 x ASH 31 Mi Scale:1/3 - 7m, elevador
3 x GP 15 JETA
1 x Crimpadora
1 x Fox 4000 mm Airworld,marco cabina
1 x ASH 31 6.08m Composite
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
2 x LIBELLE Standard 3.8m D-box H-201
2 x LO 100 ARC 3.3m,cabina
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x LUNAK 4.00 m
1 x Fox 4000 mm Airworld,cabina
1 x Arrancador EM Gear Power 80
1 x ASW 15 5000 mm (Airwold)
1 x Fox MDM-1 ARF 3.5m Orange
2 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x Gobe R-26S (Airwold)
1 x Surprise XII Timón de Dirección (Freudenthaler)
1 x Chaleco Hispano Aviación
2 x ASW 20 5000 mm con winglets (Airwold)
1 x Avia, fuselaje reforzado en fibra de carbono(Top Model)
1 x Hélice POWER-PROP 7x7
1 x Funda Alas JEEMO
1 x Fox MDM 1 4000 mm DeLuxe,bayoneta
2 x Tornillos M3x16
2 x Ball joint long
1 x Palas de autogiro de 330 mm
1 x Fuselaje Cierva C30
2 x Pegatinas Cierva C30 versión española
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Parte superior del rotor
1 x Tuerca M1,6
2 x Soporte superior de las palas del rotor
2 x Soporte cental de las palas del rotor
1 x Rodamiento 3x8x4
1 x Paracaídas P4
1 x Manga viento Ozone L -1200 mm
1 x Para-RC Trike "RC-Bullix"
1 x Aramid 50 daN 50 m
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Soporte turbina Xicoy X45 Jeemo
2 x Set de 7 Servos de 9g DS MG + cable alargador para Avanti Mini
1 x Carro remolque JEEMO
1 x Hélice POWER-PROP 14x9
1 x LASER 73" 1.85m (05) PILOT
1 x X-RAY Micro QR (Tubo de cola)
1 x X-RAY Micro QR (Profundidad)
1 x X-RAY Micro QR (Fuselaje con canopy)
1 x Encendido ZG 38/S/SC
1 x Helice FALCON 29x9 carbono-gas
1 x Helice FALCON 26x10 carbono-gas
1 x Helice FALCON 28x10 carbono-gas
1 x Cono NUT M5
1 x Parte inferior del rotor
1 x Rodamiento 3x6x2,5
1 x Tornillos M1,6x6 Allen
1 x Chili Race F3K (aramid nose)
1 x Mini DART 2 F3K carbon light 1m Green
1 x Chili F3K 2 servos ala montados
1 x Chili Race F3K (carbon biax)
1 x Codo escape ZG20/ZG22/ZG23/ZG26
1 x Codo escape ZG45/62 "largo"
1 x Helice FALCON 33x11W carbono-gas
1 x Helice FALCON 32,5x11 PUSHER Carbono
1 x EDF Ducted Fan JP Hobby 80mm + 6s Motor 2200KV (CCW)
1 x ULTIMATUM 2.0 m orange/blue
1 x ULTIMATUM 2.0 m Red Bull
1 x BULL MØ1 2.600mm (mono color)
1 x Avanti XS 1.8m Jet FREECE TRICOLORI con tren aterrizaje (SebArt)
1 x Tail boom brace LOGO 480
1 x CESSNA 50E White/Red
1 x Arandela conica ancha alumino M3 oro (4 pcs)
1 x Arandela conica alumino M3 azul (8 pcs)
1 x Brazo servo aluminio V1-Hitec 20 mm M2 azul
1 x Bancada montaje servo M (azul)
1 x Ball link aluminio M3 V1 (10 pcs)
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x Fundas BULL Mo1 2.6m de "Luxe"
1 x Portapalas metal LAMA
1 x Brazo de servo 50 mm con rodamiento (2 pcs)
1 x Deposito BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x Avanti XS Jet, Deposito Keroseno (SebArt
1 x Avanti S Jet, Fundas (SebArt)
1 x Arandela de goma M3-M4 (8 pcs)
1 x Bancada montaje servo S (rojo)
1 x Brazo servo aluminio V1-Futaba 17 mm M2 rojo
1 x Bancada servo tandem 3-3,5" para 2 servos
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Piñones servo D 54
108,855.38EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas