1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x Servo MKS 6100 DS
2 x Servo MKS HV6130
1 x Abrazadera con letrero (20 pcs)
1 x Sistema cierre 360 mm con abrazadera (2 pcs)
1 x Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x Cinta RUDDOG proteccion calor 2m x 50 mm
2 x Soporte para bridas de hasta 3 mm (10 pcs)
1 x Sistema cierre baterías 20x200 mm
1 x Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
2 x Sistema cierre Mini 14x60 mm (4 pcs)
2 x Sistema cierre 320 mm largo (5 pcs)
1 x Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x Sistema cierre 200 mm con abrazadera (2 pcs)
1 x Cinta alerones 1m x 10mm
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
2 x Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x Cinta Goldfix 1m
2 x Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x Cinta fibra vidrio 38 mm
1 x Sistema cierre negro doble cara 20x1000 mm
1 x Cinta tubuladora (5 m)
1 x Sistema cierre 250 mm con abrazadera (2 pcs)
3 x Servo AN-20 MGBBA
1 x Brazo servo "L" 65x49 mm (2 pcs)
2 x Brazo doble servo Alu eje 3 mm
1 x Brazo servo Alu eje 3 mm
2 x Brazo servo Alu 90º eje 3 mm
1 x Prolongador silicona 100 cm (Graupner)
2 x Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x Prolongador servo 20 cm HITEC/JR
1 x Prolongador Futaba 100 cm Ø 0,35 mm
1 x Prolongador servo 15cm MULTIPLEX
1 x Prolongador 90 cm (Futaba)
1 x Cable silicona "Y" 30 cm (Graupner)
1 x Prolongador cable servo POWERBOX 50cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Cable S.BUS 3 salidas 300 mm
1 x Prolongador S-Bus JR/JR 20cm
1 x Prolongador cable servo 0,14 PVC, conector ZH micro
1 x Extension silicona 30 cm hembra (Futaba)
1 x Prolongador S-Bus 1-2 silicona 30 cm
1 x Prolongador cable servo POWERBOX 75cm
2 x Prolongador cable servo 0,14 PVC, conector ZH micro
1 x Cable silicona "Y" 30 cm (Futaba)
1 x Prolongador 30 cm (Futaba)
1 x Extension silicona 30 cm macho (Futaba)
1 x Prolongador S-Bus 1-2 silicona 120 cm
1 x Prolongador silicona 10 cm (Futaba)
1 x Prolongador silicona 100 cm (Futaba)
1 x Bayoneta aluminio/strongal D25 mm/1 m
1 x Prolongador Futaba macho 40 cm de silicona
1 x Bayoneta aluminio ø30×1 mm x 1m
1 x Prolongador 100 cm (Futaba)
1 x Piloto JAN 1/4 Veleros
1 x Piloto militar "Kamikaze" tamaño 9cm (Slimline)
2 x Piloto "Adolf" Legends Series(Slimline)
3 x Brazo servo de carbono 25 mm
1 x Set de brazos de servo Hitec 40/50/55/5055 MG
2 x Set de piñones metálicos HS85MG/5085MG
1 x Set de piñones metálicos HS81MG/5082MG
1 x Ferrita con funda
1 x Brazo servo aluminio V1-Hitec 1,5" M3 azul
1 x Liston ABS I 20x10x1000 mm
1 x Manga viento Ozone L -1200 mm
1 x Rótula corta M3 con bola/tornillo (6 uds)
1 x Horn de mando 6/35 con rótula M3
1 x Crimpadora
1 x Cinta fibra vidrio 50 mm
1 x Cinta fibra vidrio 25 mm
1 x Rueda KOVO SLH 120x60 mm
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Prolongador silicona 35 cm (Futaba)
1 x Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
2 x Bayoneta aluminio/strongal D12 mm/0,5 m
1 x Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x Set de brazos de servo HS-65HB/MG/5065MG
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Acoplador M2,5 Ø 3 mm (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Acople ALU M2,5 Ø 3 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link M2 (10 pcs)
1 x Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x Ball link latón BS M3 V1 (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link aluminio M3 V1 (10 pcs)
1 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Servo SAVOX SB-2270 SG Highvoltage brushless
2 x Servo GO-09 9g
2 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm
1 x Fundas alas/cola ASPIRE
2 x Servo GO-1088MGW 74 kg.cm 0.125s/60º
2 x Servo GO-1013 MG 3.8kg
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
2 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
3 x Plancha carbono 350x150x3.0 mm
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x USB programador GO servos
1 x Servo GO-02 Digital 1.8g
1 x Tren aterrizaje Electrico ASPIRE (Electron Retracs)
1 x Receptor FUTABA R7114SB FASSTest/FASST
1 x ASPIRE Navy ARF 2.000 mm
1 x MB-339 Aermachi 84" ARF c/retractil electric
1 x Prolongador S-Bus JR/JR 10cm
1 x Antena FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Cable S.BUS 3 salidas 100 mm
1 x Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x Piñones servo FUTABA 3010
1 x Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x FUTABA F14 + R168DF + Servo S148
1 x Caja servo FUTABA S9650/9670SV
1 x Receptor Futaba R3006SB T-FHSS 2.4GHz
1 x Bayoneta aluminio ø35×1.5 mm x 1m
1 x Bayoneta aluminio ø35×1.5 mm x 500mm
1 x Tensor de riostras M2x29/43 (2pcs)
1 x Terminales riostras M3 (10 uds)
1 x Varilla acero Ø 3,0 mm x 1000 mm
2 x Fijaciones rápidas para servos (25 pcs)
1 x Bancada aluminio servo (2 uds)
1 x Set montaje ala servos HS 80/81/82/85
1 x Cable "Y" 15 cm
1 x Escape Pitts D.A. 70
1 x Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x F1 Prop Cap Can (Conector para la botella de combustible)
1 x Piloto "Dick" Legends Series(Slimline)
1 x Polea de bronce 2,5/1 (2 pcs)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Tensor de riostras M1,6x17/27 (2pcs)
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Cartuchos de humo AX-60 mezclados (5 pcs)
1 x Helice carbono 9x4.7 * 22x12
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x BULLIT 60 Ala 1095 mm
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x DOMINO 46-55 Trainer 1583 mm
2 x Servo MKS HBL550
1 x Servo MKS HV747
1 x Servo GO-1053 MG 20.0kg
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Servo MKS HV 777A+
1 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Servo MKS 6100 DS
11,671.90EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas