59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Angled clevis with threaded rod M3
1 x Couple M4 for wire (10 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Threaded coupler M3 (10 uds)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
2 x Z type of cable coupler Ø 2 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
2 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x JETImodel SINGLE BEC
1 x CC 03
1 x LUCAS pilot ARTF
1 x Aramid 50 daN 50 m
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CM-3
1 x 30 cm BEC cable (female)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Adapter lead MPX/XT60
1 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x Paramotor BackPack XXS (without accessories)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x 25 mm reinforced hinge
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Gates hinge
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
2 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Flap hinge (6 pcs)
2 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
2 x Miniature brass strap hinge, 1 m
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
2 x 18 mm reinforced hinge
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
2 x Plasti Dip Liquid Tape 429 ml black
1 x Spray adhesive AEROFIX 2
1 x Partall paste 650 g
1 x Paint gun for sprays
1 x Universal Colour Paste deep black 250 g
1 x Spannlack 1000 ml
1 x Nitroverdu 500 ml
2 x Universal Colour Paste white 50 g
1 x Glases Innovation Plus
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Adapter 4,0 mm M6
2 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Allen wheel collar M4x4
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Turnbuckle M2,5x32/48 (2pcs)
1 x Turnbuckle M2x22/35 (2pcs)
2 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Cable coupler M2,5 (2 pcs)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x Cable coupler M2x66 (2 uds)
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Vacuum bag, 1200 mm x 50 m
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Digital scale up to 40 kg
1 x Cyanocrylate MD GA460 odourless 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Double conector with JR adapter and 200 mm extension
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x 30 cm BEC cable (male)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Motor DLE 430 cc - Paramotors
1 x DPSI Ampere battery backer
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
3 x Motor DLE 200cc Std
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Cabling for Fox MDM1 wings
1 x DPSI magnetic switch actuator (housing)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x 100m servo "Premium" wire (white/red/blue)
1 x "S" set for planes
1 x Smoke set "S"
1 x Parachutist
1 x bavarianDEMON USB cable
1 x ER-40eVo Set B [Complet Set + GS200]
1 x RS-200 Touch Programmer
1 x ER-40eVo Set A [2x ER40 + RB-45]
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x BEC 3A FOXY
1 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Para-RC Mix
1 x CC 05
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Circlick securite
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x Motor DLE 200cc Premium Muffler
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Small pinned hinge (12 uds)
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Motor DLE 170 M- Paramotors
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x ABS tube 7.0x5.0x1000 mm
1 x Large flex hinge (12 uds)
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Adapter 3,0 mm M6
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Wire easy tensioner (red)
1 x 4 mm M3 red control terminal (4 pcs)
1 x Wire easy tensioner (silver)
1 x FIALA Propeller 23x8 Electric
1 x Wheel FEMA 140 mm / 6 mm
1 x Metal ring front FEMA
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x 5 mm Prop Adapter M6
28,395.84EUR
Manufacturers
Languages
Español English
Currencies