1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Hovercraft sailcloth
1 x 
2 x Servo NARO Max Std
1 x Cooler motor type 400
1 x Mini-Pix Esc 15 Amp
1 x TMM 2512-3S heli
1 x Extractor piñones 2.3/3.2 mm
1 x Support conector MPX (6 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x 90 mm rods + T patellas set for direction control
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Allen wheel collar M3x5
1 x Crystal Universal RX 35.120 Ch 72
1 x Indoor Brushed motor kit
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x 41x5,5 mm wires output (2 pcs)
1 x Clip fixing for wing (2 pcs)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Recessed MPX connector support (6 pcs)
2 x Support Pitot JETI
2 x Aro pasacable Ø20 mm (4 pcs)
1 x Cable grommet 9.5 mm (4 uds)
1 x Cap closure 33/23.5mm (2 uds)
1 x 28x5 mm wires output (2 pcs)
2 x Clip mini fixing for wing (2 pcs)
1 x Support pump Xicoy X45
1 x 1/4 Pilot "Mike"
1 x 1/6 Pilot "Garry"
1 x 1/12 Pilot "Fighter"
1 x 18m Fitting barb
1 x 20x200 mm battery rings
1 x LASER 73" 1.85m (05) PILOT
1 x Motor A10-7 L 4,4:1
1 x Motor A30-14 M V2 6 Poles
1 x Motor A60-5XS V4 28-pole kv420
1 x 3,2 mm Prop Adapter M5
1 x Motor A50-10L Turnado V3 Glider
1 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x Allen wheel collar M4x6
1 x 5 mm Prop Adapter M8
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Shaft for A60-20/22/24S (120 mm)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x 
1 x Motor B20-18 L + 4:1 gearbox
1 x Motor B40-10 L
1 x Motor A20-20 L EVO
1 x 
1 x Motor A30-14 L V4
1 x Motor A60-7XS V4 28-pole kv330
1 x TMM 1210-3S heli
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x GPS Expander Module
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Ring 320 mm length (5 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x Tape GFK 50 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Split pin 1x8 mm (10 uds)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x SE Ring HACKER 300 mm (2 pcs)
3,312.51EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies