Top » Catalog » Hardware » Batteries » LiPo Batteries » Gens Ace » GENS50005S60C

105.00EUR

Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
[GENS50005S60C]

1. Batería muy recomendable gracias a su baja resistencia interna/capacidad/voltaje y con una larga vida útil.
2. Conector de equilibrado JST/XH standard.
3. Fácilmente monitorizable.
4. Proporciona la máxima velocidad y largo tiempo de uso.
5. Capacidad de carga rápida (de hasta 5C).

Especificaciones:
- Tipo de producto:Pack de batería LiPo
- Capacidad: 5000 mAh
- Voltaje: 18,5V
- Máxima descarga continua: 60C (300A)
- Soporta picos de hasta: 120C (600 A)
- Peso: 620 g
- Dimensiones: 161x45x37 mm
- Conector de equilibrado: JST-XH
- Conector de descarga: -
- Carga: 1-3 C Recomendada, 5C Máx.

- Weight: 808 g
- Dimensions: 161x46x51 mm
- Balance Plug: JST-XH
- Discharge Plug: N/A
- Charge Rate: 1-3 C Recommended, 5C Max

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Stickers-digit for marking
1 x	Blind nut M4 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	30 cm BEC cable (female)
2 x	Cabel charger transmitter GRAUPNER
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
2 x	Connector Sub-D 2+5 Male
1 x	15 mm floating pad (30 pcs)
2 x	DPS Switch JR/JR
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Blind nut M4 (10 pcs)
1 x	Adapter lead MPX/XT60
2 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabling for Fox MDM1 wings
1 x	Aluminium cap bolt washer M3 green (8 pcs)
2 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	10 mm floating pad (72 pcs)
1 x	5 LiPo XH>EH adapter
1 x	CC 01
1 x	Circlick securite
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Adapter lead MPX/EC3
1 x	Glases Nimbus
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Smoke set "S"
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Extension silicon 35 cm (Futaba)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Futaba Female 40 cm extension
1 x	PIX Hawk with accesories
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	SBEC 40
1 x	Opto Gas Engine Kill Switch
1 x	Screw M2x6 (10 pcs)
1 x	Nylon Screw M4x20
1 x	Nut for mounting M3 (4 pcs)
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	4 LiPo XH>EH adapter
1 x	Double conector with JR adapter and 200 mm extension
1 x	DPSI magnetic switch actuator (housing)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Extension 5 lipos JST - JST/C
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (male)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Socket Screw M2x3 mm (4 pcs)
1 x	Socket Head Screw M2x8
1 x	Screw M4x12 (10 pcs)
1 x	CM-3
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Threaded insert M4 (4 pcs)
1 x	DORNIER DO 335 EP ARF 1724 mm
1 x	ALU double servo arm 3 mm shaft
2 x	Birch plywood plate 600x300x2.0 mm
1 x	Skyray (RBC Kits)
1 x	CRACK YAK (Mini) 600 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Birch plywood plate 600x300x1.5 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x	Servo AN-8 HBA
1 x	Servo AN-20 MGBBA
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	CHALLENGER Indoor
1 x	SF260 SIAI MARCHETTI 50E red/white (SebArt)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pilatus PC-21 50E, wings carrying bags (SebArt)
1 x	Motor Set CHALLENGER Indoor
1 x	Beech dowels 10 mm x 1000 mm
1 x	PIT (Aero-Naut)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	SF260 SIAI MARCHETTI 50E yellow/black (SebArt)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Tail support (2 pcs)
2 x	Steering lever
1 x	Bearing housing
2 x	Head core
2 x	Head lower part
1 x	Rotorshape Elevator
1 x	Blade holder lower
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Rotorhead pushrod
1 x	Head runner
1 x	Ball joint long
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Raer wall
1 x	Wheel keeper washer
1 x	Rudder
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Head lower part New
1 x	Rotor Mast
1 x	Screws M1,6x6 Allen
1 x	Nut M2
1 x	Baering 3x8x4
2 x	Head spacer
1 x	Balls 4 mm
1 x	Servo Fork

5,029.47EUR