Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X195 compact
2,959.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	CA Glue fast 20g
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Gear for MICRO BB
2 x	1/10 Pilot "Jack"
2 x	Cooler motor type 280
1 x	Windsock Ozone L - 700 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Smoke set "Glider"
1 x	Servo AN-20 MGBBA
1 x	Servo GO-02 Digital 1.8g
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Cable Cargador FUTABA
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	USB programador GO servos
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	AX-60 starters (5 pcs)
1 x	Threaded coupler M3 (10 uds)
1 x	Red smoke canister 100 g
1 x	Servo FUTABA BLS 276SV
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Optotronix Aurora Plug
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Servo HITEC HS-325 BB
1 x	Glases Ace
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Ventus 1:4 set of instruments
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	10m servo "Premium" wire (white/red/blue)
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Servo HITEC HS-5084 MG
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Screwdriver for Hexagon 1,5mm
1 x	Servo SAVOX SB-2290 SG
1 x	Cut tube
1 x	1/12 Pilot "Cougar"
1 x	Piloto JET 1:3,5
2 x	Adapter lead MPX/XT60
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Starter EM Gear Power 250
1 x	1/12 Pilot "Tom"
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Savox Brushless Servo SC-1251 MG
1 x	Screwdriver for Torx® TX8
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Cabel charger transmitter GRAUPNER
1 x	Pilot "Goose" (Slimline)
1 x	SAVOX SH 0254 servo
1 x	1/12 Pilot "Fighter"
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x	USB Mini Camera endoscope
1 x	Hot Glue Stick GREEN
2 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	Cooler motor type 150
1 x	Propeller POWER-PROP 15x10
1 x	10x7 tree blades propeller
1 x	Propeller MASTER 7x5
1 x	Propeller MASTER 6x3,5
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Gear set HITEC HS205/225MG/5245MG/7245MH
1 x	Balsa panel 8.0x100x1000 mm
1 x	Servo MKS HV1220
1 x	Balsa panel 6.0x100x1000 mm
1 x	Servo MKS HV6130
1 x	Servo MKS 6100 DS
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Sandpaper file 13 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Mini Lock Grips 2PCS
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	Gates hinge
1 x	Dremel 3000 130W
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	CC 01
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Pilot JAN 1/4 Saiplanes
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Heli blades angle measurer
1 x	Carbon plate 350x150x3.0 mm
1 x	Refueling Cap V3 Black
2 x	Motor holder for AC 28/7
1 x	Indoor Brushed motor kit
1 x	Cooler motor type 300
1 x	Cooler motor type 400
1 x
1 x	Propeller POWER-PROP 14x8
1 x	Propeller POWER-PROP 14x10
1 x	Propeller MASTER 5,5x4
1 x	15x7 tree blades propeller
1 x	Propeller POWER-PROP 12x8
1 x	Propeller POWER-PROP 11x8
1 x	Propeller MASTER AIRSCREW 12x8
1 x	Helice CLASSIC-Prop 20x10
1 x	6x4 tree blades propeller
1 x	MASTER 16x10 tree blades propeller
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller MASTER 7x6
1 x	9x7 tree blades propeller
1 x	Propeller MASTER AIRSCREW 9x6
1 x	Propeller POWER-PROP 11x6
1 x	Propeller MASTER 6x4
1 x	12x6 tree blades propeller
1 x	Propeller POWER-PROP 16x8
1 x	Propeller MASTER AIRSCREW 9x6
1 x	12x8 tree blades propeller
1 x	Propeller POWER-PROP 16x10
1 x	Propeller MASTER 7x3
1 x	Propeller POWER-PROP 12x6
1 x	EDF Stream-Fan 110mm kv780
1 x	Inlet lip (carbon) Stream-Fan 110 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Servo Metal Horn 15.5 mm MKS
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Servo MKS HBL599 SL
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	90x75 mm standart servo cover
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	30 cm BEC cable (male)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	1/4 Pilot "Heidi"
1 x	18 mm reinforced hinge
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Savox Brushless Servo SC-1267 SG
1 x	BEC 3A FOXY
1 x	PROXXON - SAW BLADE HSS (50MM - 100T) (28020)
1 x	JETImodel SINGLE BEC
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	30 cm BEC cable (female)
1 x	15 mm reinforced hinge
1 x	Adapter lead MPX/EC3
1 x	Servo TOPMODEL S7520 MG

8,468.39EUR